B. in a later chapter, hollow plate the smallest bending radius is 175 times of its thickness, can only cold bending, hot bending.
在后面章节中，中空板的最小弯曲半径是其厚度的175倍，只可以冷弯，不能热弯。
Cable racks shall be arranged with vertical and horizontal changes of direction such that no cable is laid at less than its minimum-bending radius as given by the cable manufacturer.
电缆支架的布置必须与纵向和横向的变化方向，如：所提供电缆生产商不得将电缆敷设低于其最小弯曲半径。
The bending radius of cable: non armoured cable, should not be less than 6 times.
电缆的允许弯曲半径：无铠装电缆，不小于电缆直径的6倍；
Principle, characteristics and application of technique up -to -date of pipe bending such as zero radius bending, MF induction bending, heat stress bending and Laser forming have been expounded.
论述了零半径弯曲、中频感应弯曲、热应力弯曲及激光弯曲成形等管材弯曲加工最新技术的原理、特点和工程应用。
At last, the formulation of allowable minimum bending radius limiting the change of the tube-wall thickness is derived, and proved to be of practical value.
推导出限制弯管壁厚变化量的许用最小弯曲半径公式，经试验验证具有一定的实用价值。
All the inside radius of the bending is R0.5 except especial declaration.
无特殊注明所有的折弯内圆角半径为r0.5。
By analyzing the wide sheet bending, the variations of theoretic radius values of outer surface, sheet thickness and thinned coefficient with radius of inner surface in bending were put forward.
对宽板弯曲变形过程进行分析，提出了弯曲过程中板坯外表面半径，板料厚度和变薄系数随板坯内表面半径变化的理论解，并与查表法和近似解作了比较。
The critical bending radius of PMMA polymer optical fiber is measured, By using grating monochromator, the exiting spectrums of the mode filters with different dimensions are measured.
对聚甲基丙烯酸甲酯(PMMA)芯聚合物光纤的临界弯曲半径进行了测试，利用光栅单色仪对采用不同尺寸滤模器的光纤出射光谱进行了测量。
When bending needed, better to adopt larger trend of bending radius so as to lower the friction between cable and casing.
在需要弯曲时，应尽量取弯曲半径大的走向，以降低钢丝绳和护套管间的摩擦力。
The characteristics of this sensor is analysed. It is concluded that for a certain refractive index range, the index of fibre core, the radius of core and bending radius need to be optimized.
详细分析了这种传感器的特性，指出对于特定的外界折射率范围，需设计纤芯折射率、光纤半径、弯曲半径三个参量的最佳组合。
Characteristics: high flexibility of small bending radius corrosion resistance strong halogen specifications b: rib loose, so that the hose can withstand greater pressure, and maintain flexibility.
特性：柔韧性高弯曲半径小耐腐蚀力强不含卤素规格b：肋宽大，使软管能承受更大压力，并保持柔韧性。
The main function of the system is in-plane bending radius estimation, forming limit estimation and forming process optimization.
本系统的主要功能有：面内弯曲半径的预测；成形极限的预测；成形工艺的优化。
Furthermore, kinetic energy, bending energy and rupture energy are coupled through the bent radius of the petals.
通过花瓣的旋转曲率半径实现了花瓣动能、弯曲能和断裂能之间的耦合。
Laser tube bending is a kind of plastic forming method with high flexibility. It is suitable for small radius bending of thin thickness tube.
管材激光弯曲是一种具有极高柔性的金属塑性加工方法，特别适合于薄壁管材的小曲率半径弯曲。
The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.
弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。
In order to adjust the bending Angle, the t type slide seat and bending press plate were used. The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.
模具采用T形滑座与弯曲角两边的压板调节，从而达到在一定范围内调节弯曲角度的目的，弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。
Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.
应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。
Tube bending is a process by which a straight piece of tube is formed to a selected radius and angle of bend.
弯管工艺是指将平直的管子按选定的半径和弯曲角度弯曲成形。
The bending loss oscillations in the two kinds of PCFs are observed by simulating the relationship between the bending loss and bending radius, and the origin of the loss oscillations was analyzed.
通过数值模拟弯曲损耗随弯曲半径的变化关系，证实了两种光子晶体光纤均具有弯曲损耗振荡特性。
So the wavelength of TFBG can be used to define the bending radius of simple supported beam.
因此可以用TFBG波长来定义简支梁的弯曲半径。
Bending radius can choose according to form 50-600mm, a journey of small can corresponding choice of smaller radius.
弯曲半径可根据所给表格选50- 600 mm，行程小的可相应选择较小的半径。
Bending radius can choose according to form 50-600mm, a journey of small can corresponding choice of smaller radius.
弯曲半径可根据所给表格选50- 600 mm，行程小的可相应选择较小的半径。
应用推荐