These bearings are used to support combined radial and axial loads with the radial load prevailing.
这种轴承主要用来承受以径向负荷为主的径向与轴向联合的负荷。
Double row tapered roller bearings can accommodate simultaneously radial load and also axial load in double directions.
双列圆锥滚子轴承在承受径向负荷的同时也可承受双向轴向负荷。
Can bear radial load and two direction of axial load.
调心滚球轴承可以承受径向负荷及二个方向的轴向负荷。
A direction can only carry axial load, can't bear radial load.
只能承受一个方向的轴向载荷,不能承受径向载荷。
The effect of radial load to radial stiffness can be neglected.
径向载荷的变化对轴承径向刚度的影响可以忽略。
Thus their radial load capacity is superior to that of deep groove ball bearings.
因此,他们的径向负荷能力优于深沟球轴承。
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷,也可承受一定量的轴承载荷。
Taper roller bearings are generally used to support combined load mainly consisting of radial load.
圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
轴承主要用于承受以径向载荷为主的径向与轴向联合载荷。
High radial load capacity, especially for heavy loads or vibration, but can not afford a pure axial load.
有高的径向载荷能力,特别适用于重载或振动载荷下工作,但不能承受纯轴向载荷。
Deep groove ball bearing can mainly endure radial load, and it can also endure some measurable axial load.
深沟球轴承主要承受径向负荷,也可承受一定量的轴向负荷。
If this is not the case, the alignment needle roller bearing must be subjected to an additional radial load.
如果不是这样,必须使对中滚针轴承承受额外的径向载荷。
Deep groove ball bearing is inseparable bearing, mainly it can be subject to radial load and some axial load as well.
深沟球轴承属于不可分离型轴承,主要承受径向载荷,也可承受一定量的轴向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,主要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,首要承受径向载荷。
Constant radial load (constant axial load center), in the load, the bearing can withstand 1 million transfer theory, the basic rating life.
恒定的径向负荷(恒定的中心轴向负荷),在该负荷下,滚动轴承理论上可以经受1百万转的基本额定寿命。
These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").
除轴向负荷外,此类轴承还能承受一定的径向负荷(见“当量轴承动负荷”)。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load. Their cups are separable for easy assembling.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷:外圈可分离,组装容易。
The radial load which is hard to measure is obtained through simulation in practice, and a new method to shorten the roller mould design period is…
将有限元数值模拟方法引入异型棒线材的辊模拉拔中,为缩短辊模设计周期提供了新的方法。
Slewing ring bearings to withstand a large-scale integrated load bearing support, which can bear a greater axial load, radial load and tipping moment.
回转支承轴承是一种能够承受综合负荷的大型支承轴承,可同时承受较大的轴向负荷、径向负荷和倾翻力矩。
Second, the calculation formula of radial rigidity is deduced according to the deformation of rollers under the radial load with axial position preload.
其次,由轴向定位预紧轴承受径向载荷时各滚子的变形,推导出轴承的径向刚度计算公式;
If this is not the case, the bearing must be subjected to an additional radial load, e. G. by increasing belt tension or idling torque, or by other means.
否则必须给轴承施加径向载荷,例如,通过提高皮带张力或空转扭矩,或采用其他手段。
Due to the strong axial and radial load to the bearing of electromotor in counter-rotating axial fan, it is always occurred that the bearing was damaged in use.
由于对旋轴流式风机电动机轴承要承受较大的轴向负荷和径向负荷,实际使用过程中常发生电动机轴承损坏的现象。
Normally these bearings can accommodate radial load only, none but single row bearings with ribs both on inner and outer rings can carry partial lighter axial load.
一般情况下只能承受径向负荷,只有内外圈均带档边单列轴承可以承受较小的常定轴向负荷。
This paper presents the structural features and characteristics of the radial impact tester, torsional fatigue tester, rotary bending tester and radial load tester used for the tests.
本文介绍了用于该试验的径向冲击试验机、扭转疲劳试验机、旋转弯曲疲劳试验机和径向载荷疲劳试验机的结构形式及性能特点。
The effect of the oil temperature and the radial load on the corrosive-wear rate of the traditional tube and rod materials was studied by means of the corrosive-wear experimental tester.
笔者通过油井管杆磨蚀试验机,对常用的管杆材料进行了耐磨蚀性能对比实验,并探讨了油井温度、径向载荷等因素对常用管杆材料磨蚀率的影响。
Considering radial load, axial load, centrifugal force and gyroscopic moment acted on the ball bearing simultaneously, an analysis model based on quasi-dynamic method was set up in this paper.
本文利用拟动力学法,同时考虑径向负荷、轴向负荷、自身离心力以及陀螺力矩作用的影响,建立了高速滚珠轴承载荷分布的分析模型。
Double row angular contact ball bearings are a form of back-to-back pairs of single row angular contact ball bearings, which support axial load in both directions as well as support radial load.
单列角接触轴承背对背的配对形式,可承受两个方向的轴向载荷,同时可承受径向载荷。
RADIAL LOAD : The load that is caused by forces seeking to tilt, bend, or shove a shaft out of line. (See: Thrust Load )
径向载荷:该载荷是由轴的倾斜、弯曲、挤压或偏心所造成(参见:轴向载荷)。
RADIAL LOAD : The load that is caused by forces seeking to tilt, bend, or shove a shaft out of line. (See: Thrust Load )
径向载荷:该载荷是由轴的倾斜、弯曲、挤压或偏心所造成(参见:轴向载荷)。
应用推荐