Acid electroless nickel phosphorus plating on PZT ceramic was studied with hypophosphite as a reducing agent.
以次亚磷酸钠为还原剂，在压电陶瓷表面进行酸性化学镀镍磷。
Under loading, the stress distribution in concrete specimen and PZT ceramic embedded are analyzed by the finite element method.
用有限元方法对混凝土模块及埋入其中的压电陶瓷在混凝土试件受到外载荷作用时的应力分布进行了分析。
In this paper the ultrasonic PZT ceramic sensors for monitoring local discharge in power transformer with optic fiber have bean developed.
作者研制成一种带光纤的电力变压器局放超声pzt传感器。
The effects on electric properties of PZT ceramic were investigated, including preheating temperature, frequency, environment temperature and polarization.
研究了粉体预热温度、频率、环境温度等工艺参数及条件对PZT陶瓷电性能的影响。
The microstructure of PZT ceramic was characterized by scanning electron microscope, and the electricity capability of piezoelectric transformer was measured.
用扫描电镜对陶瓷微观结构进行了研究，并测量了压电变压器的电学性能。
According to the RG theory of the photoacoustic effect with solids, the thermal parameters of PZT ceramic material have been measured by using photoacoustic method.
以固体光声效应的RG理论为依据，用光声法测量了压电陶瓷材料PZT的热参量。
When pulsed laser radiation irradiates a PZT ceramic slab, under certain condition there will be unusual shock wave shape like ellipse in the laser induced shock waves in the sample.
当脉冲激光辐照PZT陶瓷片时，在适当条件下，激光在样品中所产生的冲击波形上呈现椭圆状的奇异脉冲信号。
The experimental procedures of the post-treatment were investigated, and its effects on the metallization of PZT ceramic surface and the properties of the PZT ceramic components were discussed too.
本文报导了这种后处理的实施过程、控制条件及其结果，并讨论了后处理对于PZT陶瓷表面金属化及对PZT陶瓷元器件的电学性能的影响。
On the analysis of experimental data, the simplified nonlinear constitutive laws for piezoelectric ceramic PZT 4 are presented. The corresponding finite element method is established.
通过对试验结果的分析，提出经过简化的压电陶瓷PZT4的非线性本构关系，建立相应的有限元计算方法。
The new type of damping composites is consisted of chlorobutyl rubber, piezoelectric ceramic powder (PZT) and acetylene black.
这种新型的阻尼复合材料是由氯丁基橡胶，压电陶瓷粉体和乙炔炭黑混合而成。
The technological process of coprecipitation for preparing PZT piezoelectric ceramic powders is studied through orthogonal experiments.
采用正交实验方法研究共沉淀法制备PZT压电陶瓷粉体的工艺过程。
The technological process of coprecipitation for preparing PZT piezoelectric ceramic powders is studied through perpendicular experiments.
采用正交实验方法研究了共沉淀法制备PZT压电陶瓷粉体的工艺过程。
The propagation process of indentation crack in air of different relative humidity(2%, 30%, 98%) for a poled PZT-5 ferroelectric ceramic was investigated.
在不同湿度（2%、30%、98%）的空气中，研究了极化的锆钛酸铅（PZT-5）铁电陶瓷压痕裂纹在残余应力、电场作用下的滞后扩展。
The effects of the electric displacement loading on the crack initiation in a PZT-5H piezoelectric ceramic media were investigated by the theory of maximum energy release rate.
以最大能量释放率为启裂准则，结合PZT-5H压电陶瓷材料，分析了电位移载荷对裂纹启裂的作用效果。
PVDF/PZT piezocomposite consisting of piezoelectric ceramic and polymer was made according the connection mode, volume fraction ratio or geometric distribution mode.
压电复合材料一般是由压电陶瓷和聚合物基体按照一定的连接方式，一定比例和一定的空间几何分布复合而成。
The self-darken pyroelectric ceramic has been obtained by doping in PZT.
在PZT中通过掺杂得到了本体“黑”化的PZT热释电陶瓷。
PMZN piezoelectric ceramic is a kind of modified PZT materials with the incorporation of PMS materials and PZN materials.
PMZN压电陶瓷是在PZT的基础上经掺杂pms、PZN进行改性而得到的一种压电陶瓷。
There is also an important application that can be used to measure displacement, for instance, PZT piezoelectric ceramic precision displacement measurement.
另外厚膜电容式压力传感器还有一种重要的应用，它可以用来对位移进行测量，例如对压电陶瓷PZT的精密位移测量。
Also it introduces the features of BNT (Sodium bismuth titanate lead-free) replaced for traditional Piezoelectric ceramic speaker material (PZT) at last.
最后简单介绍了替代传统压电陶瓷扬声器材料(PZT)的无铅钛酸铋钠压电陶瓷扬声器(BNT)的材料特性。
Also it introduces the features of BNT (Sodium bismuth titanate lead-free) replaced for traditional Piezoelectric ceramic speaker material (PZT) at last.
最后简单介绍了替代传统压电陶瓷扬声器材料(PZT)的无铅钛酸铋钠压电陶瓷扬声器(BNT)的材料特性。
应用推荐