Most push-rod engines and some OHC engines have chains.
大多数推杆发动机和一些顶置凸轮轴发动机都有链。
Motor-driven push-rod design, adjust arbitrarily the angle of the crus and the back.
电动推杆设计，任意调节小腿和靠背高低角度。
The positions on the circumference and on the axial direction are reliable, thus the stable running of the push-rod electric machine is ensured.
它圆周方向和轴向定位可靠，保证了推杆电机运行稳定。
The sensors have a robust stainless steel body and push rod, body mounting options include M5 male thread, M5 rod eye or body clamps.
该传感器具有强大的不锈钢机身和推杆，车身安装选项包括M5的螺纹，M5的眼睛或身体棒夹具。
The braking distance braking time of electro - hydraulic and detention time of electro hydraulic push rod have been tested and researched by experiment.
通过实验，对电动液压推杆制动器的制动行程、制动时间及电动液压推杆动作滞后时间进行测定和研究。
Through reverse thinking of working principle of inclined push rod, this mold adopts button pole to offer power to rear mold slide block.
通过对斜顶杆工作过程的逆向思考，采用拔杆为后模滑块提供动力。
On the choice of power, the vehicle mounted wheelchair can use hydraulic drive, pneumatic drive, electric push rod and electric motor.
车载式轮椅自动升降机在动力的选择方面，可以采用液压传动、气压传动、电动推杆和电机等方式。
The stroke of push rod is shorter to ensure a rapid and effective braking.
制动气室推杆行程短，制动迅速有效。
Duty Officer: Each sling only allows 10 bags. When switching on, push the control rod slightly. If so, we are satisfied with our co-operation.
值班驾驶员：每吊只允许吊10包，打开吊车时，请轻推操纵杆，若如此，我们对彼此合作表示满意。
In other words the pedal must lie on the tappet push rod.
换言之，踏板必须位于推杆上方。
In the car air brake system the imbalance of the push rod stroke can cause the loss of breaking force and the decrease of breaking torque.
影响制动气室伸出推杆行程的因素很多，其中消除蹄鼓之间的间隙所产生的行程为主要因素。
The CAM follower rides against a push rod, which pushes against a rocker arm.
凸轮挺杆推动控制摇臂的推杆。
The push rod doesn't seem to be working at all.
推杆好像根本不起作用。
Inside the cylinder, a piston and rod quickly move up to push the gasoline and air into a smaller space where it meets the spark plug.
汽缸内，活塞及杆迅速走高推入一个较小的汽油和航空航天凡符合火花塞。
Both the push rod and push rod spring are installed on the lid liner, and screwed.
推杆与推杆弹簧安装在锅盖内衬上，并用螺钉连接固定。
The shift device is arranged on an assembly fixed plate. The shift device is composed of a front baffle plate, a push rod, a rack, and a tail seat.
前挡板与推杆形成一体，而齿条则侧设于推杆边，且前挡板与齿条相接位置设有一缓冲槽，使前挡板受推挤时可呈定距之缓冲位移；
The bread supporting rod is arranged above the bread push rod.
面包支撑杆设置在面包推杆上方。
Therefore, friction between the push rod and the furnace body front wall is less and the push rod is very flexible when running through the furnace body front wall.
这样推杆与炉体前壁间的摩擦力更小，推杆在通过炉体前壁时非常灵活。
The utility model relates to an electromagnet, which is composed of a yoke iron, an armature iron, a push rod, a pull rod, a starting coil, a sustain coil, a controlling circuit and an end cover.
本实用新型涉及一种电磁铁，有轭铁、衔铁、推杆、拉杆、启动线圈、维持线圈、控制电路和端盖。
A throwing part comprises a ball seat, a front push rod, a back push rod, a drive rod, a connecting rod, an actuating cylinder, a support frame, etc.
投掷部分的组成中包括球托、前推杆、后推杆、驱动杆、连杆、驱动气缸、支架等。
When the lever is raised to the vertical position it pushes a removable "Push Rod" down.
当手柄抬高到垂直位置，它就将可拆卸“压杆”压下。
Use for push rod see the "Operation instruction of electric hydraulic push rod."
推杆的使用请查阅《电液动推杆使用说明书》。
The long box assembly comprises a long box body, channel steel, a lifter, a cam mechanism, a pull and push plate, a supporting rod, etc.
长箱总成包括长箱体、槽钢、升降机、凸轮机构、推拉板及支棒等。
Test results show that the method is effective to diagnose the imbalance of the push rod stroke fault for air brakes.
试验结果表明，该模型能很好地对气制动系统推杆行程失调进行故障诊断。
The hydraulic damper is a device which is composed of an energy storage mechanism, a damping mechanism and a push rod mechanism.
它是由一个蓄能机构、阻尼机构、推杆机构组成的装置。
A joint lever is arranged on the joint, and can press the push rod when pulled by a guy cable to open the valve core.
接头上有接头杠杆，在拉索的拉动下能够压动顶杆，打开阀芯。
As the camshaft turns, the CAM lobe comes around under the valve lifter. This raises the lifter, which in turn pushes upward on the push rod.
当凸轮轴转动时，凸轮凸角转到气门挺杆下面，使挺杆上举，挺杆推动推杆。
The push rod, as it is lifted, causes the end of the rocker arm to move up.
当推杆升起时，摇臂的端部向上移动。
In the oil pipeline of the electrohydraulic push rod, a self-locking valve is designed.
电液推杆的油路中，设计了自锁阀。
The volume of liquid inlet chamber is increased through the rotation of push rod, and the polymer liquid enters through the self pressure.
通过推杆的旋转使进液腔的体积增加，聚合物溶液通过自身压力进入。
应用推荐