The effect of pulsed current on metal deposition is analyzed.
分析了脉冲电流对金属沉积过程的影响。
In this paper the effects of pulsed current on the accuracy and the process reliability of ECM is discussed.
本文阐述了脉冲电流电解加工对加工精度和加工过程可靠性的影响。
The superposition of pulsed current on the electroless reaction is referred to the pulsed electroless plating.
脉冲化学镀是指在化学镀上叠加脉冲电流。
The exciting current control circuit also can modulate frequency and modulate amplitude for the pulsed current.
激励电流控制电路产生激励线圈的脉冲电流，并对脉冲电流进行调频和调幅控制。
A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed.
对运动电弧作用下脉冲tIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
The effect of pulsed current and pulsed magnetic field on the solidification structures of LY12 aluminum alloy was studied.
在LY12铝合金凝固的过程中施加脉冲电流或脉冲磁场，研究脉冲电流或脉冲磁场对这种合金凝固组织的影响。
The lighting device may include a circuit that delivers a pulsed or thermally compensated pulsed current to the light source.
照明装置可包括输送脉冲或热补偿脉冲电流至光源的电路。
Experimental results show that the solidification structure can be remarkably refined by the application of the higher density pulsed current.
结果表明，高密度脉冲电流可以显著细化其凝固组织。
If possible, do not use offset compensation (pulsed current) because inductive reaction to the current pulse may cause unstable measurements or make autoranging difficult.
如果可能的话，不要使用偏置补偿(脉冲电流)。因为对脉冲电流的感抗可能会使测量不稳定，或者使自动量程功能难于工作。
The pulsed current peak value and EP time have a important effect on removal of the surface oxide, the lower frequency should be adopted for thin sheet of aluminium alloy.
脉冲电流幅值和EP半波时间对铝合金表面氧化膜的清理有重要影响，在焊接薄板铝合金时应采用较低的脉冲频率。
Since the newly developed A/D converter has allowed arbitrary integration time setting, the 7461A is ideal for average measurement of the pulsed current and voltage of mobile phones and LCDs.
由于新开发的A /D转换器允许任意积分时间设定， 7461A是理想的平均测量的脉冲电流和电压的移动电话和显示器生产商。
The pulsed power can works by high output voltage and large output current under the repetition rates, it has some merits: simple structure, high efficiency and high reliability.
这种脉冲电源可以实现在高重复频率工作下的高电压大电流输出，具有小型、高效和高可靠性。
This paper introduces a high-frequency series resonant charing method of solid pulsed laser power source, basing on constant current charging of digital control technology.
介绍了一种高频串联谐振充电的固体脉冲激光电源及其数字化控制恒流充电技术。
Pulsed operation also allows these instruments to output current levels well beyond their DC capabilities.
这类仪器在脉冲操作模式下还能够输出大大超出其直流能力的电流值。
For improving the detection sensitivity, it is important to choose the appropriate parameters for the pulsed eddy current PEC system.
脉冲涡流检测系统中参数的选择对于提高缺陷的检测灵敏度具有重要的意义。
These measurements often include DC current and voltage, capacitance, and pulsed I-V.
这些测量通常包含直流电流和电压、电容以及脉冲i - V。
The pulsed eddy-current (PEC) nondestructive testing is a new measuring technology.
脉冲涡流无损检测技术是一种新的检测技术。
The phenomenon of discharging in twice of underwater wire exploding is discovered by investigating the time characteristics of pulsed discharging current and voltage.
通过测量水中铜丝电爆炸的电流、电压波形发现水中高压放电存在着二次放电现象。
Experiments proved that the quantification of different depth flaws could be realized just only by scanning with pulsed eddy current testing once, so it has good prospect in use.
试验证实，脉冲涡流只需一次扫描就可对被测试件上不同深度的裂纹实现定量检测，因此具有广阔的应用前景。
The current loss in magnetically insulated transmission line (MITL) on pulsed power installation "S-300" is studied by measuring bremsstrahlung between the electrodes, current and voltage in the load.
在装置“S- 300”上，通过测量真空磁绝缘传输线中电极间电子流轫致辐射和负载上的电流、电压等参数，研究了磁绝缘传输线中的电流损失特性。
The qualitative analysis is carried out on the behavior of the partial penetrated weld pool with welding current changing from pulsed peak value to base value during pulsed TIG welding.
对脉冲TIG焊未熔透型熔池在脉冲峰-基转换期间熔池三维形态变化行为进行了定性的分析，并从力和能量角度建立了未熔透熔池液面形态的数学模型。
The rapid surface alloying of AISI 316L stainless steel by high current pulsed electron beam(HCPEB) was investigated.
利用强流脉冲电子束对不锈钢表面进行了快速钛合金化。
The hardware circuit and software program features of the given current, multi-pulsed resistance welding machine controller developed 8031 single chip processor are introduced in this paper.
本文介绍了用8031单片机研制的定电流，多脉冲电阻焊机控制器的硬件电路及软件程序的特点。
This paper describes the design process of the pulsed eddy current array probes and the composition of the detection system.
本文介绍了脉冲涡流阵列探头的设计过程，及其检测系统的组成。
An advanced technique, pulsed eddy current detection, was introduced for corrosion detection.
介绍了一种新型的腐蚀检测技术，即脉冲涡流检测技术。
The coil can be used in pulsed power technology for ns-level high current measurement.
自积分式罗氏线圈广泛用于脉冲功率技术中的快过程大电流测量。
This thesis mainly researches the methods which measure the mental thickness and the distance between the mental and the coil through adopting the technology of pulsed eddy current (PEC).
本文主要采用脉冲涡流无损检测技术对测量金属厚度和金属与线圈之间距离的方法进行了研究。
Surface treatment of titanium alloy has been carried out by using pulsed electron beam with low energy and high current.
采用低能高束流脉冲电子束表面改性设备对钛合金进行表面处理。
The pulsed eddy current test is a new development area of nondestructive testing. It has wide potential application in modern industry.
脉冲涡流检测方法是涡流检测技术的一个新兴分支，有着广泛的应用前景。
The pulsed eddy current test is a new development area of nondestructive testing. It has wide potential application in modern industry.
脉冲涡流检测方法是涡流检测技术的一个新兴分支，有着广泛的应用前景。
应用推荐