Each input of a pulse motor shaft of a step Angle stepping increment.
每输入一个脉冲电机转轴步进一个步距角增量。
Optimum design of the composite shell of pulse motor has been presented using ANSYS soft ware.
采用ANSYS软件对脉冲发动机复合壳体进行了优化设计研究。
All can be used to identify and monitor motor speeds or determine pulse counts of encoders.
全部都可以用来识别和监测电机的速度或确定编码器脉冲计数。
Such as "Hardware Pulse Assignor" used by driving stepping motor.
如驱动步进电机用的“硬件脉冲分配器”。
Step motor control, by pulse by changing the order of electricity can change the motor rotation direction, change the pulse frequency can change the motor rotation speed.
步进电机受脉冲的控制，通过改变通电的顺序可改变电机的旋转方向，改变脉冲的频率可改变电机的旋转速度。
At the same time using Holzer sensors will be converted into pulse frequency motor speed feedback to the MCU, realize the speed closed-loop control, to achieve speed detection.
同时利用霍尔传感器将电机速度转换成脉冲频率反馈到单片机中，实现转速闭环控制，达到转速检测目的。
But the step motor efficiency is low, the ability is not big, load drag pulse equivalent cannot too big, speed range is not big.
但步进电机的效率低，拖动负载的能力不大，脉冲当量不能太大，调速范围不大。
Stepper motor is a motor controlled by digital signal, which converts pulse signal into Angle displacement. The wheeling speed is controlled by the frequency of pulse signal.
步进电机是一种数字控制电机，它将脉冲信号转变成角位移，电机的转速由脉冲信号频率决定。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
Stepping motor can be controlled by pulse signal and applies to digital control system.
步进电机可直接接收脉冲信号的控制，适合于数字控制系统。
PMM8713 is pulse division IC. This chip converts pulse signal to the signals which decide a stepping motor 'phases to be on or off.
PMM 8713为集成脉冲分配芯片，可将输入脉冲信号分配成一定相序的控制各相通断的脉冲信号。
I send the pulse to the motor through a BASIC Stamp microprocessor. which keeps track of the time.
对于双刻度弧线时钟，我通过一个基本型微处理器将脉冲送到电动机。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The Hall speed transducer, the generation of the mileage pulse, the driving of step motor and the application of integrated circuit of BL2115 in speedometer are introduced in detail.
详细介绍霍尔速度传感器，里程计数脉冲的产生，步进电机的驱动和BL 2115集成电路在电子式车速里程表中的应用。
Stepper motor is a pulse will be transferred into angular displacement of the Electrical and Mechanical-DAC devices.
步进电机是一个将脉冲信号转移成角位移的机电式数模转换器装置。
The article discusses the design aim and principle of an intelligent cycle pulse distributor used for power supply for step motor driving.
讨论了一种用于步进电机驱动电源的智能型脉冲分配器的设计目的和设计原理。
Now the novel linear motor of bidirectional pulse variable-frequency control is applied to drive the flow control pump successfully.
目前，设计的双向脉冲变频控制的直线电机已成功应用于计量泵的驱动器中。
Stepping motor control by pulse, by changing the order of power to change the direction of rotation motor, change the pulse frequency may change the motor rotation speed.
步进电机受脉冲的控制，通过改变通电的顺序可改变电机的旋转方向，改变脉冲的频率可改变电机的旋转速度。
When stepping motor works in some pulse frequency, it may have the problem of oscillation and miss of synchronization, so it should be avoided at full steam.
在一定控制脉冲频率下，步进电动机可能出现振荡与失步现象，严重影响步进电动机的运行，要严格防止这种情况发生。
Under the control of the microcomputer this system not only can automatically determine the optimal control pulse sequence of the step motor, but also can control the step motor optimally.
在微机的控制下，该系统既能自动确定步进电动机的最优控制脉冲序列，又能对步进电动机实施最优控制。
Stepping motor is a kind of electromechanical component that is driven in step angle or line displacement by electric pulse signal.
步进电动机是一种将电脉冲信号转换成相应的角位移的机电元件。
On the basis of the mathematical model of AC induction motor in two phase axis system, the static measurement of electrical parameter for AC motor is completed using pulse voltage and pulse current.
根据交流感应电动机在两相静止坐标系上的数学模型，采用脉冲电流法、脉冲电压法实现了对交流电动机电气参数的静态测试。
PLC used Pulse Output Function to control the stepper motor speed, direction and distance of movement, accordingly realizing the purpose of exact orientation.
利用可编程序控制器脉冲输出指令控制步进电机的转速、方向和移动距离，从而实现精确定位。
A food waste disposer has a motor driven with pulse width modulation (' PWM ').
一种食物垃圾处理器，具有利用脉冲宽度调制(“PWM”)驱动的电机。
The encoder measures the rotated Angle of the step motor and solves the problem of pulse losing by supplementing pulse, which ensures that the tape moves one fit step every time.
编码器检测步进电机旋转角度，以补发脉冲的方式解决了步进电机的丢步问题，保证载带每次运行恰好一个工位。
The principle and designing steps of step-motor pulse divider are introduced.
介绍了脉冲分配器的工作原理和设计步骤。
Choose stepping motor speed sensor speed form, to speed sensor weighed instrument issued a series of pulses, Each pulse represents one of the units.
测速传感器选用步进电机测速形式，测速传感器向秤重仪表发出系列脉冲信号，每个脉冲代表皮带行程的一个单位，脉冲频率和皮带速度成正比。
The part of hardware refers to CPU and CPU interface circuit, motor driving circuit, voltage-frequency transform circuit, pulse power and so on.
硬件部分主要涉及CPU及其接口电路、电机驱动电路、变频取样电路、脉冲电源等。
On the basis of mathematical model of AC induction motor in vector control inverter the static measurement of electrical parameters for AC motor is completed using pulse voltage and pulse current.
在矢量控制交流感应电动机数学模型的基础上，采用阶跃电压和阶跃电流的方法实现了对交流电机电气参数的静态检测。
On the basis of mathematical model of AC induction motor in vector control inverter the static measurement of electrical parameters for AC motor is completed using pulse voltage and pulse current.
在矢量控制交流感应电动机数学模型的基础上，采用阶跃电压和阶跃电流的方法实现了对交流电机电气参数的静态检测。
应用推荐