The interval time between the two interfacing output-driving voltages is called as pulse interval.
相邻二个输出驱动电压之间的间隔时间，称为脉冲间隔。
The discussion is the extension of the pulse interval interpolation, which can be accepted by the beginner.
这种探讨是对脉冲间隔法的延伸，易被初学者接受。
The frequency spectrum and characteristics of pulse interval and width modulation (PIWM) are derived in detail.
推导了非同步型脉冲间隔与宽度双重调制(P I W M)的频谱及其特点。
The driver operates in the pulse mode, and can generate drive signal whose repeat frequency and pulse interval is tunable.
驱动器工作在脉冲模式下，产生重复频率和脉冲间隔可调的驱动信号。
The experimental results showed that the recovery time of the main gap was an important effect factor on the pulse interval of the modulator.
分析表明主开关恢复时间是影响调制器输出脉冲时间间隔的主要因素。
The effects of pulse width, pulse interval, peak current and process time on intensified layer are analyzed. And the micro-hardness and the property of strengthening layer are also analyzed.
分析了脉冲宽度、脉冲间隔、峰值电流、加工时间对强化层厚度的影响，并对强化层的显微硬度和耐磨性进行了分析。
By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.
本文通过对电火花线切割加工工艺规律的分析，选取影响工艺效果的主要因素：工件厚度、脉冲宽度、脉冲间隔、脉冲高度，作为输入向量。
Pause time between the two pulse cycles is call as cycle interval.
两个脉冲周期之间的停顿时间，称为循环间隔。
A "1" is indicated by a data pulse, occurring in the middle of the bit cell interval.
数据“1”则表示在单元间隔的中间有数据脉冲的存在。
The shift of reflective wavelength of one FBG under external strain is translated into a change in time interval of the optical pulse from another FBG drived by a PZT plate.
在外界拉力下一个光纤布拉格光栅反射波长的漂移被转变成从另一个被压电陶瓷片调制的光栅反射的光脉冲间隔的变化。
A new type of timed pulse-interval modulation (TPIM) technique in time-division multiplexing communications is proposed.
本文提出了一种定时脉冲间隔调制(TPIM)技术实现时分多路复用。
Based on pulse counting principle, the high precision time interval can be obtained by measuring the number of the high-frequency reference clock through it.
设计了一种高精度时间间隔测量模块，该模块由单片机控制，采用脉冲计数原理，通过测量时间间隔内高频参考时钟个数，得到被测时间间隔的精确值。
Applying a negative-going trigger pulse simultaneously to RESET and TRIG during the timing interval discharges C and reinitiates the cycle, commencing on the positive edge of the reset pulse.
应用一个负的触发器脉冲在一个定时周期内来同时复位和触发，这样使电容器C放电并且重新初始化一个循环，从复位脉冲的正边开始启动。
Acidizing fluids' type, concentration, jet pulse frequency, treatment time and interval treated may be selected according to degree of formation plugging.
该工艺可根据地层堵塞情况及程度，选择酸液种类、酸液浓度、射流脉冲频率、处理时间和处理层位。
This paper mainly introduces the computation of time interval of pulse delay in the design of pulse positioning of rise and fall frequency of step motor with microcomputer control.
主要介绍微机控制步进电机升降频脉冲定位设计中，脉冲间隔时间的计算方法。
The parameters such as frequency, width of each pulse and the interval between successive pulses with inverse polarity can be changed easily in program.
这些参数包括输出脉冲的频率、宽度和不同极性的两个脉冲间隙。
The functions of the processor are 1) measuring the signal parameters, especially the Pulse Repetition Interval(PRI) of desired signa.
处理器的功能包括：1）测量信号参数，尤其是选定雷达的脉冲重复间隔（PRI）参数。
So, the modulation of irregular pulse repetition interval may be employed in FCP that the randomization of signal modulation would be obtained in both time and frequency domains.
因此，若将重复周期参差调制方式融合到频率编码信号中，可使信号具备时-频调制双重随机性。
Modulation Domain and Pulse Analyzer (MDPA) is a powerful instrument for modulation domain analysis, also it is a useful tool for time interval measurement.
调制域与脉冲分析仪既是调制域分析的利器，也是脉冲分析的有效工具。
It is a important problem to deinterleave the radar signals with pulse repeat interval in electronic countermeasures.
利用脉冲重复周期将交叠在一起的雷达脉冲序列分选开来是电子对抗领域的一个重要问题。
Especially relates to: plasma display panel that aiming at minimize the generation of critical rudimental image to improve the drive pulse, and improve the interval wall structure of back plate.
尤其涉及：为了使临界残留影像的发生达到最小化而对驱动脉冲进行改善，并对后板的间隔壁结构进行改善的等离子显示板。
This paper puts forword a method to generate the complex modulation LFM signal using the slope wobble in different Pulse Repetition Interval (PRI).
该文提出利用脉间调频斜率抖动的复杂调制LFM信号，实现对数字储频欺骗干扰的抑制。
A circuitry based on DSP and FPGA was designed in order to deinterleave radar signals with different pulse repetition interval.
设计了一种基于DSP和FPGA的雷达信号分选电路，对密集的雷达信号进行分选识别。
A circuitry based on DSP and FPGA was designed in order to deinterleave radar signals with different pulse repetition interval.
设计了一种基于DSP和FPGA的雷达信号分选电路，对密集的雷达信号进行分选识别。
应用推荐