The injection mold structure of outer shell is introduced, whilst, flow system and the deciding method of pulling-core structure and slider are stated respectively.
介绍了外壳注射模结构，阐述了流道系统、抽芯结构以及滑块的确定方法。
Through analyzing molding process of the circular plug crust, determined injection mold structure with double core-pulling.
通过对圆形插头壳体的工艺分析，确定了双抽芯的模具结构。
Is a typical plastic mold, which not only include Xiangpin the cavity, lateral core pulling structure, the dynamic model has forming the core, delay core pulling bodies.
是一副比拟典型的塑料模具，它不只包罗有镶拼的型腔、侧向抽芯构造、动定模都有成型的型芯，还有延时抽芯机构。
T he plastics suction mould by this design is impact in structure and reliable in core pulling, and has high production efficiency.
采用该方法设计的吸塑模结构紧凑，抽芯可靠，生产效率高。
In accordance with the characteristics of 2-dimensional core pulling of product, the side parting surface and core pulling structure of mould was designed by means of comparison and analysis.
针对制品两面抽芯的特点，通过比较分析制定了模具的侧向分型与抽芯结构形式。
Through analyzing on the product structure, designed a simple and workable mold with half structure to solve the side core-pulling problems, simplified mold structure and saved mold cost.
通过对产品的结构分析，设计一种简单可行的哈夫结构模具，以解决侧向抽芯的问题，简化模具结构，节省成本。
The structure of 12 of the double core-pulling in different directions, the points which should pay attention to when making and trying were described.
对双层共12个不同方向同步抽芯脱模典型结构以及模具制造和试模时应注意的问题作了叙述。
The thesis presents a practical die structure with dog-leg CAM and Angle pin for secondary combined Angle core pulling of die casting draw hooks.
本文给出了拉钩铸件弯销-斜销二级联合斜向抽芯压铸模实用结构，论述了模具分型面的确定、结构特点和工作原理。
The design of the die adopted reasonable insert structure, which solved the problem of the slide short of strength and the die sets short of rigidity in the core-pulling process.
模具设计采用了合理的镶件结构，解决了滑块在抽芯过程中的强度不足以及模架刚性不足等问题。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构，重点介绍侧抽芯大滑块的设计，顶出机构和进浇方法的改进。
The die structure combined advantages of the side core-pulling and lifter body.
着重介绍了模具的抽芯结构，并对抽芯力及斜导柱进行了核算。
The contractile interior core pulling mould structure was designed for the molding of the concave part of inner side of outer casing of flow meter.
为成型流量计外壳内侧凹进部分，设计了收缩内抽芯模具结构。
A new type of practical mould structure with tightwire and idler wheel for Angle core pulling of die injecting a Angle bracket is presented.
针对把手注射模的新设计，阐述了把手注射模的结构形式，并重点分析了模具斜顶抽芯机构的设计。
The thesis presents a practical die structure with dog-leg cam and angle pin for secondary combined angle core pulling of die casting draw hooks.
本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构，论述了模具结构特点和工作过程。
The core pulling method has the advantages of small core pulling difficulty, simple spindle structure, low cost and no damage to the composite pipe;
本发明方法具有抽芯困难小，芯轴结构简单，成本低，不伤及复材管件的优点。
The specialty of the design is the flexible core-pulling structure that solved the difficult problem of unloading the screw thread and moulding the through hole at the same place.
其特别之处在于采用灵活的抽芯机构解决了在同一位置脱螺纹和成型碰穿孔的复杂问题。
Dissertation was made on the structure characteristics and principle of the die-casting die with dog-leg CAM and angle-lift splits core-pulling mechanism.
给出了实用的弯销与斜滑块抽芯结构，论述了其结构特点和工作原理。
Dissertation was made on the structure characteristics and principle of the die-casting die with dog-leg CAM and angle-lift splits core-pulling mechanism.
给出了实用的弯销与斜滑块抽芯结构，论述了其结构特点和工作原理。
应用推荐