ICMP is used by IP as well as some higher level protocols, such as Transmission Control protocol (TCP).
icmp由ip和一些更高级别的协议使用，如传输控制协议(TCP)。
Stream Control Transmission protocol (SCTP) is a new transport layer protocol added to the 2.6 kernel.
流控制传输协议(SCTP)是2.6内核中增加的一个新的传输层协议。
The two most popular transport layer protocols are the transmission control protocol (TCP) and the user datagram protocol (UDP)
两种最流行的传输层协议是传输控制协议（TCP）和用户数据报协议（UDP）
Linux also supports protocols such as the Stream Control Transmission protocol (SCTP), which provides many advanced features above TCP (as a replacement transport level protocol).
Linux也可以支持诸如流控制传输协议(SCTP)之类的协议，它提供了很多比tcp更高级的特性(是传输层协议的接替者)。
Recall that the Internet protocol (IP) is the core network layer protocol that sits below the transport protocol (most commonly the Transmission Control protocol, or TCP).
回想一下，InternetProtocol (IP)是传输协议(通常称为传输控制协议或TCP)下面的核心网络层协议。
The result was a suite of internetworking protocols known as TCP/IP (after the first two protocols defined by the standard, Transmission Control Protocol and Internet Protocol).
结果，名为TCP/IP的一套网络互联协议（在首批标准化的两个协议——即传输控制层协议和互联网协议后）产生。
The IP layer, in turn, provides services used by the Internet Control Message Protocol (ICMP) and Transmission Control Protocol (TCP).
反过来，ip层又提供由网际控制报文协议(ICMP)和传输控制协议(TCP)使用的服务。
It is used by Transport Layer protocols of the Internet protocol Suite, such as Transmission Control protocol (TCP) and User Datagram protocol (UDP).
端口被用于互联网协议集中的传输层协议，就像传输控制协议(TCP)和用户数据报协议(udp)。
Transmission Control Protocol (TCP).
传输控制协议(TCP)。
TCP is a transport protocol providing transmission of data over IP networks, and IP is a network protocol containing addressing and control information that allow for data to be routed.
TCP是通过IP网络提供数据传输的协议，IP是一个包含寻址和控制信息，允许数据路由的协议。
Transport Layer protocols, such as the Transmission Control Protocol (TCP), the User Datagram Protocol (UDP), specify a source and destination port number in their packet headers.
传输层协议，诸如传输控制协议（TCP），用户数据报协议（UDP）， 会在它们的头部指定一个资源和目的地的端口号。
By making relative communication protocol in the SCM and the same in the PC, the card can be directly used in an industrial field control system with highspeed data transmission.
通过在单片机方和PC机方制定相应的通讯协议，该卡能直接用于采用计算机技术、对要求数据传输速率比较高的工业现场控制系统中。
The software carried on the transmission protocol realization, the instrument remote control and the system software design, so connected the ethernet to made up the embedded network instrument.
软件方面进行了传送协议实现、仪器远程控制和系统软件的设计，接入以太网，组成嵌入式网络仪器。
In this paper, we propose a new multiple access control (MAC) protocol for underwater acoustic Ad hoc networks, namely, the parallel transmission multiple access (PTMA) protocol.
本文中，我们为此提出了一种新的多址接入控制(MAC)协议，即并行传输多址接入(PTMA)协议。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
It is an alternative to the more commonly used Transmission Control Protocol (TCP).
它是另一种更常用传输控制协议(TCP)的代替。
We designs a communication protocol on this model, implementing many functions between host computer and radio, such as data transmission, radio management and control, status advertisement, etc.
本文在此接口协议模型之上，设计出通信协议，实现宿主机和电台间的数据传递、电台管理与控制、状态通告等功能，并为今后的功能扩展预留了接口。
The control scheme and coordinated implementation of PLC transmission protocol are described in detail.
详细阐述了控制方案及与PLC传输协议协调的实现方法。
Firstly, this thesis studies the widely used class of network transmission control protocol, namely TCP flow sending rate model.
本文首先对广泛应用的网络传输控制协议TCP流的发送速率模型进行研究和分析。
The system's wireless network video transmission and intelligent network control functions are implemented with the use of multi-thread technology and optimized Real-time Transport Protocol (RTP).
利用多线程技术和优化了的实时传输协议RTP实现了视频数据的无线网络传输和智能网络控制功能。
While Transmission Control Protocol (TCP) is widely adopted end to end transport layer protocol on the Internet and Wide Area Networks (WAN).
而传输控制协议（TCP）作为一种端到端的传输层协议已经广泛的应用在因特网络和广域网中。
Stream Control Transmission protocol (SCTP) is a new transport protocol which has been standardized by IETF to overcome the limits of TCP.
流媒体控制传输协议SCTP是IETF推荐的新兴传输层协议，其主要目的就是为了克服TCP的局限性。
This paper presents a receiver-based diagnostics method to identify the factors limiting the data transfer during transmission control protocol(TCP) downloads.
该文给出了一种可在数据接收方诊断传输控制协议（TCP）连接数据发送限制因素的方法。
Various types of border collision bifurcations occurring in a discrete feedback transmission control protocol-random early detection (TCP-RED) system are analyzed based on normal form method.
结合范式方法对传输控制协议和随机早期检测(TCP -RED)离散反馈系统中出现的不同种类的边界碰撞分岔现象进行了分析。
The Stream Control Transmission Protocol (SCTP) provides a sequential packet service in the Internet domain.
流控制传输协议(SCTP)在因特网域中提供了一个连续信息包服务。
The round trip transmitted delay from source to destination has a great adverse effect on the stability and rapidity of the transmission control protocol (TCP) congestion control.
源端到目的端的往返传输时延将给TCP拥塞控制的稳定性和快速性带来极大的不利。
The S- MAC protocol can achieve better performance by allowing dynamic scheduling, and sending control and data packets under different transmission conditions.
对S-MAC协议的改进主要有两种方式：动态调整、区别控制包与数据包的发送条件进行发送。
The S- MAC protocol can achieve better performance by allowing dynamic scheduling, and sending control and data packets under different transmission conditions.
对S-MAC协议的改进主要有两种方式：动态调整、区别控制包与数据包的发送条件进行发送。
应用推荐