The design of protect circuit is a key aspect of high power laser diode driver.
大功率半导体激光器驱动电源的关键是保护电路的设计。
Whether protect circuit continuity measures, whether the earthing sign is firm.
是否有保护电路连续性措施，接地标志是否牢固。
The interface and protect circuit of design between TMS320F240 and IPM was explained in detail.
文中对TMS320F 240与IPM的接口及保护电路的设计也做了详细的阐述。
In protect circuit, the paper bring forward to many protective measures such as over-current, over-voltage.
在保护电路中，本文提出了较为全面的过流、过压及过热等保护措施等方案。
At the same time, the over current and short were adopted to protect circuits and improve circuit reliability.
同时使用过流和短路保护电路，提高电路可靠性。
Limit protect circuit is to prevent laser from destroying by double protection, including software and hardware.
限流保护主要防止驱动电流超过激光器的额定电流而导致激光器损坏。
The Intelligent Power Module is been used for power instrument, its inner protect circuit raise reliability of the system.
功率器件采用智能功率驱动模块，其内置的保护电路大大提高了系统的可靠性。
Economy tape, especially for protect circuit board with irregular surface. No residue remained when removed. Tear off once it solidify.
经济型胶带特别适用于保护表面不规整的线路板，揭除后不会留下任何残胶，固化后立即揭除。
There is still no integrated high voltage over-voltage protect circuit in SPIC. A novel integrated high voltage detector is proposed by using FFLR.
针对SPIC中没有可集成的高压过压保护，提出了一种利用场限环的分压特性设计的高压电压探测器。
The composition of the inverter, the working principle of full-bridge main circuit, controlling circuit, drive circuit and protect circuit are described.
就其电源的主体结构，全桥主电路、控制电路、驱动电路以及保护电路的工作原理作了简要的论述。
This paper analyses the design of thermal protect for LDO, then gives a bipolar thermal protect circuit for LDO and a CMOS thermal protect circuit for LDO.
分析了LDO中过温保护电路的设计，主要介绍了LDO中双极型过温保护电路和CMOS过温保护电路。
DSP's output circuit, keyboard and display circuit, high precision measure circuit and credibility protect circuit are analyzed, and the software design is given.
对DSP的输出电路、独具特色的键盘显示电路、高精度的检测电路和可靠的保护电路进行了分析，并给出了软件设计。
Comparing to conventional fixed voltage, the slope limit voltage in the over power protect circuit can improve the constant power limit capability in different input voltage.
提出在过功率保护电路中利用斜坡电压取代传统的固定电压，以达到不同输入电压下的恒定功率限制。
The structure and component of the IGBT inverter type welding power source are introduced in the paper. The welding power source include main circuit, control circuit and protect circuit.
论文介绍了IGBT逆变焊接电源系统的结构和组成，整台焊接电源包括电源主电路、控制电路和保护电路。
During the work, if the temperature controller is invalid, the excessive heat protect circuit can cut the driving current, and force the laser to stop work to insure the safety of lasers.
在工作中，如果控制激光器温度的温控器失效，恒流源自身的过热保护功能可切断驱动电流，强迫激光器停止工作，确保了激光器的安全使用。
The third chapter mainly introduces the hardware design of soft starter, including the main circuit, control circuit, drive circuit, and protect circuit and auxiliary switched power design.
第三章详细介绍了软起动控制器的硬件设计，包括主电路、控制电路、驱动保护回路和辅助开关电源电路的分析和设计。
There is always an internal circuit breaker to protect the instrument from overload.
总有一个断电器以防止仪器超负荷运转。
Circuit Breakers are supplied to protect the 115 VAC Inputs (2 each) as well as the Variable Amplitude Low Voltage Powers used by the Indicator Under Test (UUT) for Power, Reference or Lighting.
断路器被提供用于保护115VAC输入(各有2个)，以及保护被测指示器(UUT)所用于电源，基准或照明的可变振幅低压电源。
Double protect: it has design to avoid charge's electric circuit and short circuit protection function in the lamps and lanterns.
双重保护：灯具内部电路设计具有防止充电，短路保护装置功能。
Adopt strict charge to manage the circuit, it can protect with overload, undervoltage, short circuit, etc. output for standard USB power supply interface.
采用最严格的充电管理电路，具有过载，欠压，短路等多重保护，标准usb电源接口输出。
A new circuit scheme of drive, protect, signal distribution and delay for IGBT is proposed.
本文提出一种新型的用于IGBT驱动、保护及信号分配延时的电路方案。
The protect range is relational to short circuit type and phase when phase differential current connection mode is adopted.
当采用两相电流差接线方式时，保护范围与短路类型和短路相别有关。
Because the circuit needs current overload protect, a double loop strategy , with current feedback of filter inductance as inner loop and output voltage as outer loop, is studied.
根据需要电路电流过流保护的特点，重点介绍了滤波电感电流反馈做内环，输出电压做外环的双环控制策略。
The foamed aluminium material with different density and pore-diameters is adopted to protect the circuit modules.
采用不同密度、不同孔径的泡沫铝材料对电路模块进行保护。
This paper exemplifies the circuit construction, the function and working principle of the device of control, protect and working state display of electric maching using solid state relay.
介绍了利用固态继电器组成的电机控制、保护、运行状态显示装置的电路组成和工作原理。
To protect power switches, soft-starting circuit was designed to overcome the surge current.
同时采用软启动电路防止浪涌电流，保护功率开关管。
Previously, a typical protection circuit would include a relay, resettable fuse and MOV combination to protect against the above combination of threats.
以往来说，典型电路保护将继电器、可恢复式保险丝、与金属氧化物压敏电阻组合来保护防止损害。
Previously, a typical protection circuit would include a relay, resettable fuse and MOV combination to protect against the above combination of threats.
以往来说，典型电路保护将继电器、可恢复式保险丝、与金属氧化物压敏电阻组合来保护防止损害。
应用推荐