First, you identify candidate services that are common to all members of the product line, using the method described in the analysis section for single systems.
首先，你要使用针对单一系统的分析部分中描述的方法，确定产品线的所有成员共有的候选服务。
Firstly the article introduces the basic theory and method of financial engineering briefly to create a set of general rules on financial product analysis and investment portfolio.
报告首先简要介绍金融工程的基本原理与方法，形成金融工程实施过程中采用的金融产品分析和金融产品组合的一般性规则。
The method of simulation analysis was researched to support product intelligent redesign, which include simulation modeling, redesign propose intelligentized generation and its implementation.
研究支持产品智能再设计的仿真分析方法，包括仿真建模、再设计建议的智能化生成及其实现。
Management of objective cost, cost function analysis by means of the value engineering and general method realization of objective cost control for new product development are presented.
介绍了目标成本管理、运用价值工程进行成本功能分析及实现新产品开发目标成本控制的一般方法。
Specifically addresses operation process of the method, focusing on cross analysis of customer and product, and identifies the specific service order.
具体阐述该方法的操作过程，重点研究客户与产品交叉分析的内容，并确定了具体的服务顺序。
To help the analysis and improvement of the complex product development processes, an intelligent method combining qualitative and quantitative techniques was put forward.
为了辅助复杂产品开发过程的分析与改进，提出了一种定性、定量相结合的智能化方法。
The fault and influence factors existing on the flat-bottomed spherical density bottles used in the lab have been analyzed by using the analysis method of product quality reliability.
应用产品质量可靠性分析方法对目前实验室常用的平底球形密度瓶存在故障及影响因素进行了分析。
In order to integrate the product and manufacturing system design, an automated setup planning and tolerance analysis method is developed.
为了使产品和制造系统一体化，开发了一种自动编排规划和公差分析方法。
The assembly tolerance analysis and optimization method based on digital product design model is put forward according to the analysis of digitalization preassembly method.
通过对数字化预装配方法的分析，提出了基于数字化产品设计模型的装配公差分析和优化方法。
Based on a design example of antenna stabilized platform, product design method of the virtual prototyping-based simulating design from load analysis to whole model structure analysis was explained.
以某型天线稳定平台为例，阐述了产品从初始载荷仿真分析到整体模型结构分析的基于虚拟样机仿真设计的方法。
On the basis of analyzing and comparing of traditional method (FMEA) and AFD, puts forward a new product failure analysis method, which based on AFD, then gives the work flow of this method.
在分析对比传统失效分析方法(fmea)与afd的基础上，提出了一种基于AFD的产品失效分析方法，给出了这种方法的工作流程。
How to evaluate the product cost in the phase of requirement design was researched and a cost analysis method of requirement product based on requirement cost features was presented.
研究了如何在产品的需求设计阶段估算其成本，提出了基于需求成本特征的需求产品成本分析方法。
Principal component analysis (PCA) has found wide application in chemical process monitoring and product quality control as a data-driven modeling method.
主元分析(PCA)作为数据驱动的一种统计建模方法，在化工产品质量控制与故障诊断方面得到广泛研究和应用。
On the basis of currently existed concept designing method of mechanical product based on layer analysis of function, a kind of implementation method for fuzzy synthetic judgement was introduced.
在现有基于功能层次分析的机械产品概念设计方法的基础上，介绍了一种模糊综合评判实现方法。
This paper introduces the technological process, matters needing attention, analysing method of gold content and impurity and the result of the analysis of actual product.
介绍了工艺过程、注意事项、含金量与杂质的分析方法及实际产品的分析结果。
The relationship between the method of fault mode, effect and fatality analysis (FMECA) and the increase of product quality is described.
论述用失效模式、影响、致命度分析(fmeca)法与提高产品质量的关系。
The method is sensitive, rapid and easy to operation, and meets the requirement for the product analysis of 4 -5N high purity europium metal and its oxide.
方法灵敏、快速、简便，满足4～5N高纯金属铕及其氧化物产品分析的要求。
The research work can provide a more accurate method of reliability analysis for aviation product in the use phases.
研究成果为航空产品在使用阶段提供了一种更为精确的可靠性分析方法。
This paper introduced the principle of exponent product method and its application on the motion analysis of spatial closed-chain mechanism.
介绍了指数积方法的原理，以及它在空间闭链机构运动分析中的应用。
An improved analysis method for determining iron content in sodium fluosilicate product was introduced.
介绍了一种改进的测定氟硅酸钠产品中铁含量的分析方法。
Finally, satistical process control and process capability analysis method are applied to control and monitor to A product in C process in order to prevent abnormality.
最后，应用控制图和过程能力分析方法对C工序的A产品实施控制和监测，防止异常波动。
The method and experience for analyzing MCU embedded system domain are pointed out in conclusion, through the researches of the concept, the method, the process and the product of domain analysis.
通过对领域分析的相关概念、方法、过程以及产品的研究，从而得出在MCU嵌入式系统领域进行领域分析的相关方法以及经验。
Based on the analysis of related objects of product configuration, a product configuration method based on product model was introduced.
对产品配置的相关对象进行了分析，提出了一种基于产品模型的产品配置方法。
The method of product feature extraction and analysis can be divided into supervised machine learning methods, semi-supervised machine learning algorithms and unsupervised machine learning algorithm.
产品评价对象的提取与分析的方法主要分为有监督的机器学习方法、半监督的机器学习算法、无监督的机器学习算法。
Tolerance analysis is a basis of reliable design. And fault diagnosis is a basic method to maintain the product.
容差分析是可靠性设计的基础，故障诊断是维持产品可靠性的基本方法。
A method of electrical analysis based on this provision and a related program product is also provided.
本发明还提供了在此基础上的电分析的方法及相关的程序产品。
The relationship between these four essentials was described based on the non-redundancy analysis of them. The information view of the uniform product model was established in IDEF1X method.
通过对统一产品模型的四要素的无冗余分析，建立了它们之间的联系，应用idef1x方法构建了统一产品模型的信息视图。
The relationship between these four essentials was described based on the non-redundancy analysis of them. The information view of the uniform product model was established in IDEF1X method.
通过对统一产品模型的四要素的无冗余分析，建立了它们之间的联系，应用idef1x方法构建了统一产品模型的信息视图。
应用推荐