The –v option stands for “verbose” and gives you all of the details of the process.
选项-v表示进程运行的所有细节都会显示出来。
The situation is complicated by the fact that TOGAF v 8.0, Enterprise Edition is a relatively new process, with limited street expertise available.
情况因TOGAFv 8.0，EnterpriseEdition是相对新的过程，拥有有限的上路经验这一事实而变得复杂了。
V-ball valve repair without a long, long life, to provide you with the real state of efficiency of a process control valve.
型球阀长期不需修理，使用寿命长，为您提供了真正的高效率进行控制工艺状况的一种阀门。
You can automate this process using the -v option provided by the mqsibar utility.
您可以使用mqsibar实体所提供的- v选项来自动完成这一过程。
In Santa Clara County v Southern Pacific Railroad in 1886, for example, it ruled that companies enjoy the protections of the 14th amendment (including due process and equal protection under the law).
例如，在1886圣塔克拉拉郡诉南太平洋铁路公司案（Santa Clara Countyv Southern PacificRailroad）一案中，法院裁决，认为公司受第14条修订案保护（包括其正当程序和受法律平等保护）。
The spinning process of splitting V type belt wheel involves movement of multi-body and couple of elastic-plastic deformation.
型劈开式皮带轮的旋压剖分成形过程涉及多体运动以及弹、塑性多变形模式的耦合。
Chapter V is about the quality control through the phases of system analysis and design, it studies the quality control process, quality control points and methods in these stages.
论文第五章为体系剖析设计阶段的质量控制研讨，研讨了需求剖析与软件设计阶段的质量控制流程，质量控制重点和方式。
The results show that producing HRB400 reinforced bar can substitute low alloy for conventional V microalloy process by composition adjusting and rational cooling control after rolling.
结果表明，通过成分调整和合理的轧后控冷，能够用低合金替代传统的V微合金化工艺进行HRB400螺纹钢筋的生产。
Presently the main software process models are waterfall model, V-Shape model, incremental model, spiral model, rapid prototype model and parallel model.
目前的软件过程模型主要有线性模型、V模型、增量模型、螺旋模型、原型模型和并行网络模型。
The main reason for strength increase of V microalloyed steel is ultra-fine microstructure in TSCR process.
组织超细化是导致薄板坯连铸连轧流程V微合金钢强度提高的主要原因。
The V-anvil drawing process of large forgings was simulated using FE software, and the stress-strain distributions in the plastically deforming area were compared after different V-anvils drawings.
利用有限元软件模拟了V型砧的锻造拔长过程，并对不同夹角的V型砧压下后锻坯塑性变形区内应力、应变的状态进行比较。
It is concluded that the local tensile stress created during quenching process and the stress concentration due to sharp V-shaped notch are the primary reasons of cracking.
认为，淬火过程中产生的局部拉应力加上尖锐V型槽口引起的应力集中是造成开裂的主要原因。
Qualitative physical modeling verifies the fact that the forging method with horizontal V-shaped anvil is an effective process to control the mechanical properties of axial forgings.
定性物理模拟实验证明了水平V形砧锻造法是控制轴类锻件力学性能的有效工艺手段。
Based on physical simulation of edge rolling process in Trimming-Free plate rolling method, the effection of V rolling and chamfer rolling on the plate profile is analyzed.
基于中厚板无切边轧制法中立轧轧边变形的物理模拟，分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。
The article also introduces a new upsetting process with a V-Shape plate, which can not only remove cavity flows in pressing and welding but also improve the distribution of inclusion.
并介绍了一种既能压实焊合空洞类缺陷，又能改善夹杂物分布的新型V型板墩粗工艺。
Basic theories and process of V permeating of die steel and performance of V permeating layer were introduced.
介绍了冷变形模具钢渗钒的基本原理和工艺方法以及渗钒层的性能。
The gate region was fabricated by V-groove and Al sputtering, which can simplify the process, and make devices flexible in the adjustment process.
使用V形槽工艺，用溅射铝的方法代替扩硼工艺制备静电感应晶体管的栅极区，简化了工艺流程，使器件在调试过程中具有很大灵活性。
This thesis is devoted to the confusing freight taxation problems occurred on the sales process where V. A. T. payers as a dealer charges, disburses, pays the freight or as a buyer pays the freight.
文十重点介绍增值税一般纳税人在销售行为中作为销售方收取运费、为购买方代垫运费、支付运费，以及作为购买方支付运费情况下的容易混淆的涉税处理问题。
Multi-V pulley spinning is more difficult than other pulley spinning, this paper presents a new process base on the same volume principle and the rigid translation theory.
多楔轮是目前生产中较难成形的一种旋压皮带轮，本文运用体积不变原理和刚性平移理论提出一种新的工艺方案。
The welding process and method for the inverted-V gate of the permanent ship lock of Three Gorges project is outlined in this paper.
介绍了“三峡永久船闸人字门”焊接工艺过程及所采用的方法。
Study show that new multi-V pulley forming process can better product quality, reducing production costs and improve production efficiency.
研究表明，采用多楔轮成形新工艺在改善产品质量的同时，还降低了生产成本，提高了生产效率。
The V-EPC cast-in process was used to prepare the cast iron-based particles -containing composite. The distribution characteristics of the hardness and microstructure of the composite was studied.
采用V - E PC铸渗工艺制备铁基颗粒复合材料，并对复合材料硬度及显微组织分布特征进行了研究。
The existing forms of Ni and V and its position for the latter process are discussed. The removal methods of Ni and V are recounted in detail.
讨论了镍和矾在原油中的存在形态，以及对石油后续加工造成的危害。
Three passes of vertical-horizontal(V-H) rolling process with 3-D thermal and mechanic field was simulated by explicit dynamic FEM, updating geometric method and implicit static FEM.
结合显式动力学有限元方法、几何模型更新方法、隐式静力有限元方法对立-平辊轧制过程三道次三维热、力场进行了分析。
With this met hod V-type process in current avionics system design and verification is modeled and formally described for computer analysis and identification.
该方法针对目前航空电子系统的系统设计与验证中的“V”型流程进行建模，并对其进行形式化的描述，以供计算机分析、识别。
Accelerated cooling process optimizes size distribution of V (CN) particles in VN rebars and get further low V content.
适当的轧后加速冷却工艺使V (CN)析出粒子的粒度分布更加优化，可使钢中v含量进一步降低。
The effects of carbon content and rolling process parameters on microstructures and properties of the V-N microalloyed steels were studied.
研究了含碳量和轧制工艺对低碳微合金V - N钢显微组织和性能的影响。
The results obtained by 4-aminoantipyrine colorimetric and U V spectrometric analysis show that the some change of the structure of DMPT occurred during the process o…
用4-氨基安替比林比色法和紫外分光光度法对提取物的分析结果表明，DMPT在聚合反应或回流提取过程中已发生某种结构上的变化。
The results obtained by 4-aminoantipyrine colorimetric and U V spectrometric analysis show that the some change of the structure of DMPT occurred during the process o…
用4-氨基安替比林比色法和紫外分光光度法对提取物的分析结果表明，DMPT在聚合反应或回流提取过程中已发生某种结构上的变化。
应用推荐