Based on the construction control of Jiangjin Bridge, this thesis Mainly include two aspects: construction process simulation and analysis and geometry control.
论文以江津桥施工监控为工程背景,主要工作包括两个方面:江津桥施工过程模拟计算分析和线形控制。
Provide a simulation tool for process analysis and testing.
提供一个用于流程分析和测试的模拟工具。
Through simulation and analysis, Modeler enables the optimization of a business process.
通过模拟和分析,Modeler支持对业务流程进行优化。
This means you can take advantage of powerful Modeler features, such as simulation and analysis, and then export a process to XPDL for further refinement in the FileNet environment.
这意味着您可以利用强大的Modeler功能(如模拟和分析),然后将流程导出到XPDL,以便在FileNet环境中进一步优化。
In the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.
在完成过程中,充分考虑了铺设轮的机械设计要求,采用了计算机辅助仿真设计、有限元分析和试验校验的方法。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统,进行了动态机理建模研究,给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
Process modeling, simulation, analysis and optimizing are a kind of scientific and economic way for an enterprise to build quick and efficient processes that meet the enterprise's needs.
要建立满足企业需求的快速、高效的流程,对流程进行建模、仿真、分析优化是一种比较科学且经济的方法。
Theoretical analysis and experiment show that the optimum vibration parameters and drilling parameters can be seeked at the different stages of the drilling process by proposed simulation model.
理论分析和实验表明:应用该仿真模型,能在振动钻削过程的不同区段寻找最优的振动参数和切削参数。
The simulation and monitor of the structure construction process and the analysis of stability are important steps to guarantee safety in the construction course and the normal use in the future.
因此大跨空间结构施工过程的模拟与监测和稳定性的分析是保证结构施工过程安全性和日后正常使用的重要环节。
This dissertation integrates theoretical analysis and numerical simulation method to investigate the ignition transient process of large aspect ratio solid rocket motors.
本文采用理论分析和数值仿真方法对大长径比固体火箭发动机点火瞬态过程进行了系统研究。
First the establishment of mathematical model for the FCFS process scheduling algorithm, then theoretical analysis on the model and last experimental simulation.
本文先建立了FCFS进程调度算法的数学模型,再对模型先进行理论分析和实验模拟。
So the research of numerical simulation on the laying process and strength analysis of wire rope has been carried out in this paper.
因此,本文进行了钢丝绳成形过程数值模拟和制品力学强度分析的研究工作。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件( ADAMS)对模型进行了动力学模拟和优化设计。
Based on the process simulation and the analysis method of thermal power system, the tube wall temperature online monitoring system for high temperature heating surface was successfully developed.
在借鉴过程仿真和热力系统分析方法的基础上,开发了一套锅炉高温受热面金属壁温在线监测系统。
With the analysis of the Environment Multi-sensor Data Fusion process in, this thesis brings out the simulation testing system structure, and describes function of its every module.
通过对多传感器信息融合处理环境的分析,给出了仿真测试系统的总体结构,对各模块的功能进行了描述。
Simulation testing and theoretical analysis were made to study generating mechanics and moving evolutionary process of "granular arch" structure of upper immediate roof in top coal caving.
通过相似模拟实验和理论分析,研究了综放条件下上位直接顶“散体拱”结构的形成机理和移动演化过程。
The details of real-time data acquisition, control of tension process simulation and online performance analysis of the simulative testing bench are further illustrated.
在此基础上,文章进一步说明了系泊锚机张力仿真试验台的实时数据采集、仿真过程控制和在线性能分析等功能的实现细节。
The perturbation domains of parameters in typical inertial process are obtained by theoretical analysis and numerical simulation respectively for continuous and discrete integral VSC.
对于连续与离散积分型变结构控制,分别从理论分析计算与数值仿真两种途径得到了典型惯性过程的参数可摄动范围。
The author evaluated the output voltage drop owing to the commutative process and armature reaction in detail by means of the analysis of the existent system and the dynamic simulation experiments.
作者通过对实际系统的分析和动态模拟试验的验证,对其由于换相及电枢反应引起的输出电压降低作了较为详尽的、定量的分析。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟,建立了可供工艺优化计算的数学模型。
However, few products provide modeling engineer with simulation analysis function to verify, diagnose and optimize business process model so as to sustain BPR.
但是,很少有产品为建模人员提供全面的工作流仿真分析功能来验证、诊断和优化过程模型,以对企业业务过程提供更有效的支持。
And the progress of construction through analysis and optimization, simulation run major business process improvement, test the feasibility of the method and effectiveness.
并通过施工总进度分析与优化、主要业务流程仿真运行改进,验证了该方法的可行性及实效性。
This paper illustrates the process of analysis and design of automatic train operation by use of object-oriented method, and completes the software design of this simulation system.
本文采用面向对象的设计方法,对列车自动驾驶仿真平台的分析与设计进行了详细论述,并完成了系统仿真软件的设计。
This paper expounds the guidance law is presented, the design process, and the guidance command guidance law of performance, the simulation analysis verified the feasibility of the guidance law.
文中详细阐述了该制导律的设计过程,给出了制导指令,并对该制导律的性能进行了仿真分析,验证了该制导律的可行性。
Virtual instrument technique has powerful functions of process simulation, data collection, display and analysis. It has been used widely in industrial product, research and teaching.
虚拟仪器技术具有强大的过程仿真、数据采集、显示和分析等功能,在工业生产、科研和教学中具有广泛的应用。
Computer simulation on complicate shaped parts during quenching process has been realized by using FEM analysis of temperature field phase transformation-stress and strain.
籍助于温度场-相变-应力和应变的有限元分析方法(FEM),实现了复杂形状工件淬火过程的计算机模拟。
The elementary simulation process of Wuzhong Wastewater Treatment Plant was confirmed, and the steady state and the unsteady state's simulation analysis was made.
初步确定吴忠市污水处理厂的模拟流程,进行了稳态和非稳态模拟分析。
In the process of simulation, it has considered steady work and subjected to load shock such two kinds of situations, and then carried on analysis to control response for those situation.
仿真过程中考虑了系统稳定工作以及受到负载冲击这两种不同情况,并对这两种情况下的控制响应进行了分析。
Simulation analysis and experiment results indicate that changing tool geometric angles continuously in cutting process is an effective method in on-line controlling of cutting vibrations.
模拟分析与试验结果表明,连续改变刀具角度是在线控制切削颤振的有效方法。
Based on the pre-process, numerical simulation and post-process, the application of visualization technique, which is used in the numerical analysis of resistance spot welding process, is introduced.
从前置处理、数值计算及后置处理三个方面出发,着重介绍可视化技术在电阻点焊过程数值分析软件中的应用。
应用推荐