If something wrong is found upstream, or if we stop building the product, the scrap will be higher due to the in-process inventory.
如果在上游发现了问题，或者如果我们停止生产产品，由于在制品库存，报废率会更高。
Once the copy process finishes and the Snapshot is no longer needed, simply unmount and scrap it using lvremove.
复制过程完成之后，就不需要快照了，这时只需用lvremove卸载并销毁它。
Since pig iron and scrap are cheap, and because there is no expensive refinement process, cast iron is a low cost material compared with steel.
由于生铁和废钢铁都便宜，又因为不需要昂贵的精炼过程，和钢相比铸铁是一种廉价材料。
Continuously improve injection process to reduce cycle time, scrap, and to improve quality.
负责工艺参数的持续改善来减少成型周期、报废和提高质量。
Zinc coated steel is recycled along with other steel scrap during the steel production process - the zinc volatilises and is then recovered.
镀锌钢材可以和其它钢铁生产过程中的废料一起回收——其中锌通过挥发进行回收。
No material recovered from used receptacles shall be used in the manufacture of IBC bodies. Production residues or scrap from the same manufacturing process may, however, be used.
不得利用从旧容器回收的材料来制造中型散货箱箱体。然而，生产残余物料，或同一制造工序中出现的切屑则可以利用。
The foam bitumen and asphalt recycling scrap basic principles and practices of major applications, as well as features in the application process are introduced.
介绍泡沫沥青和废旧沥青再生的基本原理和主要应用做法，以及在应用过程中的特点。
Responsible for process engineers insure cycle time & scrap rates meet the targets.
负责所有的工艺工程师，确保设备的循环节拍与废品率达标。
It is necessary to research a new method of SPFS preparation by solid reaction process with industrial scrap iron powder.
有必要探索由工业废铁粉经固相反应直接制取固体聚合硫酸铁的工艺。
This paper discuss the mechanism and process of making emulsive moistureproof dope for corrugated board with scrap polystyrene foam by selecting proper commix impregnant and emulsion.
本文叙述了以废弃的聚苯乙烯泡沫塑抖为原料，选择合适的混合溶剂和乳化剂制取水乳性瓦楞纸箱防潮涂料的机理及过程。
Simon Jin is a Persistent and diligent Supervisor who leads our Process Team driving Process optimization to achieve the scrap rate and OEE targets.
金星是一位勤奋、对工作执着的主管，他带领我们的工艺团队积极推动压铸工艺流程的优化，并一直以实现甚至超过目标报废率和设备综合效率而努力。
The graphitized waste and scrap auxiliary materials produced in the process of carbon production are solid waste but have great potentiality for recovery.
炭素石墨制品生产过程中产生的石墨化废旧辅料，在炭素行业是最有开发潜力的固体废物。
With this model the EAF Steel-making process can be simulated, including of scrap melting procedure, the changes of temperature, slag quantity and compositions of steel, slag and off-gas.
该模型可动态地模拟电弧炉冶炼过程中的废钢量、炉温、渣量、钢液成分、炉渣组成和炉气成分的变化。
The reasons of scrap rising and missing material during the working process of punching die are analyzed, and the solving methods in theory and actual manufacture are provided.
分析了在冲裁模工作中，废料上浮及不带料产生的原因，以及在理论、实际生产中的解决办法。
NPP shall strengthen the scientific management of the process from procurement to scrap.
在工具管理中，应加强对工具从采购到使用报废全过程的科学管理。
Continue improvement production process, improve product quality, improve productivity, reduce scrap rate, etc.
不断改进生产工艺，提升产品的质量，提高生产力，降低不良率等。
By using the simulation method, a study has been carried out for the full-scrap converter smelting process established on an industrial scale outside the country in recent years.
用计算机模化方法，对近年来在国外已实现工业生产的全废钢炼钢过程进行了模拟研究。
This articles introduces the process of using Kaldo furnace to treat copper scrap adopted by Guixi Smelter's new 300,000 ton expansion project, as well as the equipment technology.
介绍江铜贵冶年产30万t铜冶炼项目引进卡尔多炉处理废杂铜冶炼工艺的情况及相关设备的技术，并介绍了卡尔多炉这种炉型处理的废杂铜的优缺点。
A wet-firing combined process has been developed for preparing yellow lead and red lead from scrap lead batteries.
以废铅蓄电池为原料，采用湿法、火法联合冶炼技术制备黄丹和红丹。
The CONSTEEL process introduces a new concept in electric steel -making. The process USES the furnace off-gas and fuel to preheat the scrap fed into the furnace.
康斯迪工艺提出了电炉炼钢新概念：即利用电弧炉排出的高温废气对送往炉中的炉料进行连续预热。
The shredding process of steel scrap was simulated through FEM software ANSYS/LS-DYNA based on Nolinear finite element method. The simulating results that steel scrap is shredded are acquired.
利用非线性有限元法，以ANSYS/LS-DYNA为工具，对不同锤头形状、不同锤重、不同锤击速度的回收钢破碎过程进行了计算机数值仿真，得出了回收钢最佳破碎速度的结论。
Improve process, use new technology, new working process, material. Improve product quality, reduce scrap rate improve gating efficiency.
制定工艺技术改进计划，积极采用新技术、新工艺、新材料，提高产品质量、降低废品率和铸件利用率。
This paper introduces the cigarette-ping-en-mouth scrap in tow bar recovery process and equipment.
本文简要介绍了卷烟聚丙烯嘴棒废品中丝束回收工艺和设备。
The research status, including PCB scrap components, pyrolysis process, pyrolysis products characteristics and pyrolysis devices, was introduced in general.
对废旧印刷线路板的成分、热解工艺、热解产品特性和热解设备等方面的研究状况进行了全面的论述。
Scrap steel has become a useful, because it can stand the painful process of tempering.
废铁之所以能成为有用的钢材，是因为它经得起痛苦的磨练。
This paper presents the process of getting the qualified molten iron through melting scrap, carburant and moderate cast pig iron, which offers a new way for producing ductile iron.
介绍了增碳剂在铁液中溶解的机理和目前主要采用的投入法和喷粉法增碳工艺。
This paper presents the process of getting the qualified molten iron through melting scrap, carburant and moderate cast pig iron, which offers a new way for producing ductile iron.
介绍了增碳剂在铁液中溶解的机理和目前主要采用的投入法和喷粉法增碳工艺。
应用推荐