The qualitative and quantitative results may be used as a reference for process parameter adjustment in the newly built plant.
结果表明，研究获得的定性和定量两方面结果可供该厂在工艺参数调试中作参考。
It is shown by simulations that this control strategy can achieve good disturbance rejection performance to periodic disturbances, and is more robust against process parameter variations.
仿真结果表明，该方法对周期性扰动具有良好的抑制效果，对过程参数的变化具有很强的鲁棒性。
And the process parameter of MA is studied.
另外，还对MA的工艺参数进行了研究。
All the results are helpful for process parameter optimal design.
所得结果有助于工艺参数的优化设计。
The PAN-SS membrane for different usage can be acquired by changing related process parameter.
调节有关制膜工艺参数即可获得特定用途的超滤分离膜。
Is there any experiment conducted before process parameter change.
在工艺参数更改前是否作试验。
Effect of process parameter on microstructure and wear resistance of the coatings were studied.
研究了工艺参数对熔覆合金层的组织和耐磨性的影响。
The robustness of a process parameter is reflected by the width of the proven acceptable range.
可接受的参数范围反映工艺参数的稳定性。
The volume of flow is a process parameter which is often measured in fluid transmission systems.
在流体传动系统中，流量是需经常测量的过程参数之一。
Two-phase flow parameters measurement is a difficulty in field of industrial process parameter measurement.
两相流参数检测是工业过程参数检测的一个难点。
According to different plate width and rolling condition, process parameter such as rolling pressure are measured.
本文根据现场不同板宽、不同轧制条件情况，实测了轧制压力等工艺参数。
Carry out various methods to validate process parameter and promote product quality, and optimize production process.
能够运用各种方法进行制程参数的试验及确认，提升产品的品质与优化生产制程。
Product characteristic or process parameter which affects a product's safety or compliance with regulatory requirements.
影响产品的安全性或法规要求的符合性的产品特性或过程参数。
The production equipment and process parameter for producing heavy denier and mult-filament polyester fiber are described.
介绍了粗旦、多孔数涤纶长丝的生产设备和工艺参数。
The paper introduces the technological procedure and principle of instant rice production and offers the process parameter.
介绍了方便米饭生产的工艺流程及其原理，同时给出了各工段的工艺参数。
Selecting the optimized clearing process parameter and the suitable condition for the flax knitted yarn by the experiments.
通过清纱试验，探索出亚麻针织纱清纱的最佳工艺参数及适合条件。
The study has laid a base for material process parameter optimization, tool selection optimization and technics programming.
铣削加工有限元模拟研究为铝合金切削加工的工艺参数优化、刀具的优选和工艺规划奠定了基础。
Related process parameter, condition and characteristic of pretreatment of steel board in container production are introduced.
介绍了在集装箱生产中钢板预处理的有关工艺参数、条件和特性。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
The paper presents THIOPAQ bio-desulfurization mechanism, bio-reactor structure feature, process parameter and application example.
介绍 THIOPAQ生物脱硫机理 ，生物反应器结构特点 ，工艺参数及应用实例。
Through analyzing the diagrams of influential factors, the optimized process parameter scheme was obtained and further verified by simulation test.
根据参数水平影响趋势图，分析得出最优组合方案，并对该方案进行了模拟验证。
Based on the said calculation and related analysis, process parameter optimization is done to expand product mix in terms of size range and variety.
通过计算分析，在现有顶管机的基础上进行工艺参数优化，可扩大机组生产的产品规格和品种。
This article has described the structure of arc turning tool for machining the large diameter bearing race as well as the machining process parameter.
介绍了加工大尺寸轴承圈的车圆弧工具结构及加工的工艺参数。
This article describes the optimized process parameter and method for the arc furnace design and operation, as well as the other auxiliary conditions.
为较好地实施该工艺，电弧炉主要工艺参数及辅助条件应与之相适应。
Pilot test of dyeing and printing effluents treatment with baffled reactor was carried out to determine the process parameter and technical reliability.
对印染废水进行挡板式水解酸化实验，旨在探索工艺参数及该技术的可靠性。
This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.
系统主要功能包括：通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。
This system consists of the machine tool parameter setting up, Cutting tool administration, POST-processing, and process parameter installation and so on.
本系统包括机床参数设置、刀具管理、后置处理、加工参数设置等内容。
BP neutral networks model has been established in order to predict process parameter of shear spinning based on many data accumulated during manufacturing.
以生产数据为学习样本，建立BP神经网络模型，实现对剪切旋压工艺参数的预测。
BP neutral networks model has been established in order to predict process parameter of shear spinning based on many data accumulated during manufacturing.
以生产数据为学习样本，建立BP神经网络模型，实现对剪切旋压工艺参数的预测。
应用推荐