Process control requirements of the position or speed low voltage motors using VVVF, the brake.
工艺流程要求调速或定位控制的低压电机采用变频调速，制动。
RUP adds structure to an agile approach by focusing on driving out requirements uncertainty early and tightening process control naturally as the project progresses toward completion.
RUP通过在早期逐出需求的不确定性将结构添加到一个敏捷方法中，并且随着项目的不断推进很自然地绷紧了处理过程的控制。
Teams that do not have a requirements change control process must field change requests from all quarters and often have difficulty saying "no."
那些没有需求变更控制流程的团队只好把来自各个角落的变更请求全部公布出来，进而常常难于否决这些请求。
Addressing the social side of software engineering, Scrum's proven process patterns can offer immediate benefit in requirements management, change control, and project management.
至于软件工程的社会效应方面，Scrum已被证实的过程模式可以即时地方便需求管理，变化控制以及项目管理提供。
This process addresses and documents the project and deliverable requirements, product requirements, boundaries of the project, methods of acceptance, and high-level scope control.
这一过程处理和记载对项目与可交付成果提出的要求、产品要求、项目的边界、验收方法，以及高层范围控制。
The purpose of production parts approval is to check whether toolings for formal production and products made in process control meet the customers' requirements or not.
生产件批准的目的是验证由正式生产工装和过程控制制造出来的产品是否符合顾客要求。
The procedure is my company's procurement process control, to ensure that the purchased products conform to specified requirements.
本程序规定我公司对采购过程进行控制，以保证采购产品符合规定要求。
Create control points and critical size requirements for production during manufacturing process.
为生产过程设置主要控制点和关键尺寸控制要求。
The organization's control of the outsourced process has to be based on the need for product conformity to requirements.
组织必须根据产品相对各项要求的符合性的需要建立对外包过程的控制。
Through quality control of product and process, to ensure the delivered product meet customer requirements and internal quality requirements.
通过对产品和过程的质量控制，确保发运的产品满足客户和内部质量要求。
A bidirectional pulse power supply is designed, which adopts a two stage structure for process requirements. On this basis, its control system is also designed.
设计了一种采用两级结构来实现工艺要求的双向脉冲电源，在此基础上设计并实现了电源的控制系统。
Requirements and key control of the cable manufacturing process are discussed based on the work practice.
结合工作实践对电缆制造和生产过程的要求和控制要点进行讨论。
Introduces the process of the test and the control requirements and discusses the design for the hardware and software of the PC system.
介绍了检测台的工艺流程及控制要求，对PC自动控制系统的硬件及软件设计作了充分的讨论。
Quenching and tempering heat treatment process for raw materials, temperature control, controlled atmosphere furnace, quenching medium, such as strict requirements.
调质热处理工艺对原材料、炉温控制、炉内气氛控制、淬火介质等都有严格的要求。
Also, when some requirements must be changed, this tool can provide impact analysis for the project leader. And then the leader can control the whole developing process.
并且当有需求变更时，此工具可以给项目负责人提供变更影响分析，便于负责人控制整个开发过程。
So, in the design of the control system of process control to comprehensive consideration of the requirements, cost factors, choose the proper control motors.
所以，在控制系统的设计过程中要综合考虑控制要求、成本等多方面的因素，选用适当的控制电机。
Suspension Cast-in Situ Beam construction is to control the construction process and bridge state of internal force and linear, so that the bridge State could fully meet the design requirements.
公路悬浇梁施工监控就是控制施工过程中和成桥状态时结构的内力和线形，以使悬浇梁的成桥状态充分满足设计要求。
This article illuminates the process and characteristic of double-wire MAG welding from requirements of welding machine, gas, metal transfer control and welding process.
从其焊接设备的要求、 保护气体以及其熔滴过渡控制、焊接过程等几个方面，详细介绍双丝MAG焊的工艺及其特点。
This control method can regulate the burn-off process of contact bridge according to requirements so that the required flashing voltage is lowered and the flashing heating efficiency raised.
这种控制方法可以根据要求改变触点的烧化过程，从而降低激发闪光所需的电压，提高闪光加热效率。
The requirements of process and quality control of materiel packaging design was intro- duced.
概述了军品包装的设计开发程序和过程控制要求。
And according to the installation of ventilating engine and illuminating lamps concrete requirements and process are elaborated and devices control modes are proposed.
就隧道供配电系统进行了说明，针对通风机照明灯具的安装要求及过程进行了阐述，并提出了设备控制方式。
The technique process of compounding unit of catalytic agent of HDPE plant, control procedures and requirements are introduced. Relevant control strategy is studied and made.
介绍HDPE装置催化剂配制单元的工艺流程、控制步骤和要求，研究制定了相应的控制策略。
Taking the requirements of quality control process in German VW Group as example, the article introduces a kind of modern quality control mode of outsourcing auto parts.
文章以德国大众集团的质量控制过程要求为例，介绍了一种现代汽车外购件质量控制模式。
The paper introduces the requirements of installation and process of Ikarus articulator and its hydraulic control system equipped in Huanghai bus 6181S02.
介绍黄海客车6181S02所用伊卡露斯铰盘及其液压控制系统的安装及工艺要求。
The quality control is an integral part of the quality management, which is engaged in meeting the quality requirements covering process control, take-over control and process improvement.
质量控制是质量管理的一个部分，致力于满足质量要求，包括过程控制、验收控制和过程改进。
According to the technological requirements and features in the assembling process for the vane pump of automobile, a programme control system is designed using S7-200PLC of SIEMENS.
根据汽车转向泵自动装配过程工艺要求和特点，采用SIEMENS的S7- 200plc设计出一种程序控制系统。
The isothermal forging process is introduced in the paper which is to meet the technical requirements of the landing gear cylinder, and how to control the process parameters is also introduced.
介绍了根据起落架外筒技术要求确定的等温模锻成形工艺方案以及此项工艺的工艺参数控制。
In line with the requirements for the process control in the RH refining a RH temperature model and an alloy minimum cost model have been developed.
根据RH精炼处理对过程控制的要求，建立了RH温度与合金最小成本模型。
To meet the requirements for a bionic-arm in a scheduled smooth-dynamic process caused by the change of its required tasks, an online harmonious control algorithm is proposed.
针对仿生手臂在目标任务需求改变后对规划平稳动态过程的需求，提出了实时检测动态参数并将其反馈至前向控制环节进行在线协调控制的算法。
Based on the technological characteristics and requirements of grinding process at Hedong Gold Mine, a JS-872 separate computer control system of grinding process has been developed.
基于河东金矿磨矿过程工艺特点和要求，研制了JS- 872型磨矿过程计算机分散控制系统。
应用推荐