The optimal process condition was determined by experiment.
由实验结果确定了较佳工艺条件。
On the basis of it, the best process condition was determined by the kinetics experimental.
在此基础上进行动力学实验，确定浸出的最佳工艺条件。
The effect on the pulp intension of all kinds of factors in the new process condition was analyzed.
本文分析了新工艺条件下各种因素对浆强度性能的影响。
Pretreatment and the process condition of milk protein blended fabric and elastic fabric were introduced.
介绍了牛奶蛋白混纺织物及弹力织物的前处理加工过程及工艺条件。
The results indicated that the prepared bactericide had good sterilization under the optimal process condition.
结果表明，在优化的工艺条件下，制得的聚季铵盐杀菌剂具有良好的杀菌效果。
The paper introduce the influence of co 2 laser welding process condition on welding joint quality of Zr 4 alloy.
研究了二氧化碳激光焊接工艺条件对锆-4合金接头质量的影响。
The optimization process condition is researched by the method of simulation, and bring up the usage scope of this method.
并用模拟法进行了部分氧化工艺优化条件的研究，提出了这一方法的使用范围。
It's important to optimize process condition and improve the quality of the film based on the right testing and analyzing.
通过对材料的测试分析来优化实验工艺条件，改善薄膜的质量就显得尤为重要。
The process condition was determined by orthogonal test, and the esterification rate of the above reaction reaches to 98%.
用正交实验确定了工艺条件，酯化率达98%。产品性能指标与已二酸二辛酯相近。
The synthetic experiments on MBASR were done, including the process condition, membrane fouling mechanism and kinetics study.
并对MBASR处理生活污水的工艺条件、膜污染机理及反应动力学进行了系统实验。
To improve the diagnosis of software process condition, this dissertation puts forward the software process valuation framework.
为便于这些软件企业诊断软件过程状况，本文提出了软件过程评估框架。
Combine with the characters of every methods, reaction mechanism, process condition, effect factors and exist questions are involved.
结合各方法的特点，从反应机理、工艺控制、影响因素、存在问题等方面进行了比较和评述。
The influences of the process condition to the properties of SPMP as bulk density and average diameter were investigated by the numbers.
论文系统研究了工艺条件对多气孔球扁药粒度和堆积密度等特征性能参数的影响规律；
The process condition of preparing amyl alcohol with C5 fraction as material, through sulphuric acid addition hydrolyzation was studied.
研究了以C5馏分为原料，用硫酸加成水解法制备戊醇的工艺条件。
The microstructure model to explain how PET filament self - elongate and process condition of PET self-elongation filament were discussed.
探讨了PET纤维自伸长的微观结构运动模型和聚酯自伸长纤维的加工工艺条件。
Among aluminium alloy indirect extrusion producing period, various process condition influence different result to the coarse grain structure.
铝合金反向挤压过程中，不同的挤压工艺条件对粗晶组织将产生不同的影响。
In a certain process condition, the back mixing of the substances in the mobile reactor affects the product distribution in reactions of parallel.
在一定的工艺条件下，流动反应器内物料的返混影响着平行反应的产物分布。
The paper researches into the process condition of high nickel FCC equilibrium catalyst magnetic separation recovery technology industry application.
本文研究了高镍fcc平衡剂磁分离回收技术工业化工艺条件。
Emulsified diesel fuel was tested in the presence of demulsifier, Observing the effects of various factors, the advanced process condition was defined.
对乳化柴油进行破乳试验，考察了各种影响因素，确定了最佳的工艺条件。
In this paper the preparation and process condition of nylon-6 resin, the development trends of new technique and new kinds of products were described.
本文论述了尼龙6树脂的研制、生产情况、新技术、新品种的开发动向。
As the result, with composite alkali, the peeling effect is better than that with single alkali. Meanwhile, the process condition of peeling is optimized.
结果表明，复合碱剂比单一碱剂具有较好的剥离效果，文中对剥离的工艺条件进行了优化。
The basic principle, choice and control of process condition of treatment of electroplating effluent containing cyanide by chlorine-alkali method are discussed.
论述了氯碱法处理含氰电镀废水的基本原理、工艺条件的选择和调控。
In the second part, process condition, operational gist and process characteristic of container airless spraying, container films drying and curing were discussed.
文章第二部分讨论了集装箱无气喷涂工艺条件、操作要点和自动喷漆工艺特点，以及集装箱涂膜的干燥与固化。
Through practice production, the optimum process condition is given, which can efficiently remove impurity on fiber and increase whiteness and content of cellulose.
通过生产实践，给出胡麻粗纱煮漂工艺条件，能有效地去除纤维上的杂质，提高白度和纤维素含量。
The influence of process condition such as spinning pack, cooling condition, collection oiling, annealed zone, drawing condition etc on products quality were expounded.
探讨纺丝组件、冷却条件及集束上油、缓冷区、拉伸工艺等条件对产品质量的影响。
By extruding several type starch materials on single screw extruder and twin screw extruder, the relationship of extrudate, process condition and equipment are observed.
在单、双螺杆挤出机上进行了多种淀粉原料的挤压实验，研究了原料含水率、挤压操作参数、设备结构对挤出过程和挤压产品的影响。
Production process condition and physical property specification of food-grade hollow container resin HDPE5000B are expounded, and the resin has been tested and analyzed.
论述了食品级中空容器树脂hdpe5000b的生产工艺条件、物性指标，并对树脂进行测试分析。
The analysis of plant design parameters is made to present a comparison between standard and stack gas recycle plants with reference to process condition and energy recovery.
对影响硫酸装置设计的各种参数进行分析，给出了尾气循环工艺与传统流程在工艺条件及能源回收等方面的对比数据。
The analysis of plant design parameters is made to present a comparison between standard and stack gas recycle plants with reference to process condition and energy recovery.
对影响硫酸装置设计的各种参数进行分析，给出了尾气循环工艺与传统流程在工艺条件及能源回收等方面的对比数据。
应用推荐