Near Field Optical Microscope (NFOM) is a kind of scanning probe microscopy with high resolution.
近场光显微镜(NFOM)是一种高分辩率的扫描探针显微镜。
Photon scanning Tunneling microscopy (PSTM) is a kind of scanning probe microscopy with high resolution.
光子扫描隧道显微镜(PSTM)是一种高分辨率的扫描探针式显微镜。
The experimental methods are novel and the results new, further expanding the field of application of scanning probe microscopy.
拓宽了扫描探针显微技术的应用范围，在实验方法和研究成果上具有明业的创新性。
As a new kind of scanning probe microscopy, scanning ion conductance microscopy (SICM) is designed for imaging non-conducting biological sample at the nanometer scale.
扫描离子电导显微镜技术是在纳米尺度进行非导电的生物样品成像的一种新型扫描探针显微镜技术。
Piezoelectrically driven micropositioning stage (piezo-stage) is one of the typical piezoelectrically driven actuator which is widely used in scanning probe microscopy.
压电工作台属典型的压电元件驱动的微定位器，在扫描探针显微镜等仪器设备中应用较广。
The film and its surface morphologies of amino-polysiloxane were observed and studied by means of atomic force probe microscopy(AFM) and contact angle measurement instrument.
应用原子力显微镜（AFM）和接触角测量仪对乙酸酐改性氨基聚硅氧烷的成膜性及膜形态进行了研究。
Carbon nanotube has been expected to be a suitable material to the apex of scanning probe microscopy (SPM) tips because of its unique physical properties and special structures.
碳纳米管由于特殊的空间结构和突出的物理性能而广泛用于各类扫描探针显微镜。
The basic principle, application and new progress of nanolithography based on scanning probe microscopy, are described in this review. Then, the tendency of the research is proposed.
本文介绍了扫描探针纳米加工技术的基本原理、应用前景和最新进展，并讨论了该技术的发展趋势。
The interaction between the cerium and tin in steel was studied by vacuum induction melting, Xray diffraction, optical microscopy, electronic probe microscopy analysis, and microhardness tester.
采用中频真空感应熔炼炉、X射线衍射仪、金相显微镜、电子探针、显微硬度计等实验分析方法，研究了稀土金属铈与低熔点金属锡在钢中的相互作用。
Several quantitative drift measurement techniques for scanning probe microscopy (SPM) were introduced. A new method using two-dimensional zero-reference masks was proposed to measure the SPM drift.
对扫描探针显微镜(SPM)仪器漂移的定量测量的几种方法进行探讨，提出应用二维零位标记进行漂移测量。
Atomic force microscopy generates very high-resolution images (about 5-nanometer resolution) by “feeling” the surface of a sample with a tiny probe tip.
原子力显微镜是运用一种微小的探针去“感受”样本表面，能得到高分辨率的影像（约5纳米的分辨率）。
Atomic absorption spectrometry (AAS), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometry (EDXS) are carried out to characterize the deposition on fiber probe.
通过使用原子吸收光谱仪，扫描显微镜和能量色散X射线谱仪对覆膜光纤探针进行表征。
Tungsten probe is one of the common probes used in scanning tunnel microscopy (STM).
钨探针是扫描隧道显微镜（STM）常用探针之一。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
Near-field optical microscopy, based on scanning sample surfaces by the tip of optical probe, obtained the imagined information about the object surface.
近场光学显微镜是利用探针的扫描来获得样品表面信息的。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
Reasons of failure in cooling pipe of the reactor have been studied by the chemical composition analysis, optical microscopy examination and electron probe microanalysis.
应用化学分析、金相和电子探针显微分析技术对反应器中冷却水管的失效原因进行了分析。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
The distributions of composition, phase-and microstructure were examined respectively by using electron probe microanalysis (EPMA), X-ray Diffraction (XRD) and scanning electron microscopy (SEM).
分别用电子探针（EPMA）、X衍射（XRD）和扫描电镜（SEM）查证了其组分、相结构和显微结构的梯度分布。
Here Raman microscopy and electro probe technique were used to identify the corrosion products and their locations on and within of ancient Yuan Dynasty bronze mirror from Lufeng of Yunnan province.
应用显微拉曼光谱和电子探针技术，对云南禄丰出土的元代铜镜腐蚀情形进行研究，确定了铜镜本体及其表面腐蚀产物的成分，并初步分析了元代青铜镜采用的防腐技术。
The distance between the terminal atom and the probe of conduction atomic force microscopy is quite flexible, and the electronic transport properties of molecules are sensitive to the distance.
分子末端原子与探针的距离具有较大地自由度，不同的接触距离导致了分子的电流值有较大地差别。
Energy Dispersive Spectrometer (EDS) has been widely applied to analytical field with electron probe and scanning electron microscopy, and it is the main tool of element analysis.
配备X射线能谱仪的扫描电镜和电子探针已广泛的应用于分析领域，是最为主要的微区成分分析的工具。
The hardening layer was analyzed by metalloscope, microhardness, electronic probe and transmission electron microscopy.
用金相显微镜、显微硬度计、电子探针和透射电镜对硬化层进行分析。
Morphology and chemical composition of fly ash residues of pozzolanic reaction were investigated by scanning electron microscopy (SEM) and electron probe microanalysis (EPMA).
采用扫描电镜和电子探针等分析手段研究了粉煤灰火山灰反应残渣的形貌和化学组成。
Morphology and chemical composition of fly ash residues of pozzolanic reaction were investigated by scanning electron microscopy (SEM) and electron probe microanalysis (EPMA).
采用扫描电镜和电子探针等分析手段研究了粉煤灰火山灰反应残渣的形貌和化学组成。
应用推荐