The principle and design method of the controller are given out in this paper.
文中给出了控制器的原理和设计方法。
The operating principle and design method of a new manual tool are introduced.
介绍一种新型手用工具的工作原理及设计方法。
The characteristics of structure, working principle and design method of the system were introduced.
阐述了系统的结构特点、工作原理和设计方法。
A working principle and design method of a robot hand with passive wrist are introduced in this paper.
介绍悬吊式被动手腕机械手的设计计算方法。
In this paper, the working principle and design method of self_lock device of gear and rack are introduced.
介绍了一种齿轮齿条自锁机构的工作原理和设计方法。
This paper presents the principle and design method of a precision digital resistor constructed by a circuit.
本文介绍用电路构造智能式精密数字电阻仪的原理及技术途径。
The work principle and design method for flexible work tank elevator of EDM machine tool are briefly introduced.
简介了电火花成形机工作油槽柔性升降系统的工作原理及设计方法。
Also the principle and design method of the position feedback at the end of stroke are introduced in more detail.
并较详细地介绍了行程末端位置反馈定位的电控原理和设计思想。
There has been discussed the main principle and design method of two newly tested circuits- oil-addition circuit a…
文中还着重阐述了两种新试验的回路—补油回路和安全闭锁回路的设计指导思想及具体设计方法。
The principle and design method of a new design of a time-to-digital converter (TDC) implemented on an FPGA is presented.
介绍一种基于现场可编程门阵列（FPGA）的时数转换器（TDC）的原理及设计方法。
This paper introduces the principle and design method of cross-coupled contouring control of multi-axial CNC machine tools.
介绍了CNC机床耦合轮廓误差补偿方法的原理及设计方法。
Through the analysing of mechanism of breaking rock in a hole explosion, the principle and design method of a crushing blasting is expounded.
通过对炮孔爆破的破岩机理分析，论述了挤压爆破的原理；
The generalized concept and flow diagram of dynamic design are proposed and its principle and design method are simply described in the paper.
提出了动态设计的广义概念与流程，简要论述了它的原理和方法。
In the paper, a cast iron seal used in high temperature pneumatic cylinder is introduced. Its operating principle and design method is described.
本文根据转炉气动挡渣器回转气缸的工作环境特点，对其气缸活塞的密封进行了改进设计。
There has been discussed the main principle and design method of two newly tested circuits - oil-addition circuit and safe-blocked circuit as well.
文中还着重阐述了两种新试验的回路—补油回路和安全闭锁回路的设计指导思想及具体设计方法。
The working principle and design method of one phase power meter with IC card is presented. Hardware circuit is given and its working process is discussed.
给出了单相IC卡电度表的工作原理、设计方法和硬件电路并讨论了其工作过程，同时给出了程序的主要工作过程流程图和设计思想。
In this paper the development of power line harmonic analyzer based on ind us-trial PC is introduced, and the working principle and design method are given.
介绍了以工业控制计算机为核心的电能质量分析仪，阐述了仪器的工作原理和设计要点。
The configuration, function, working principle and design method of a wireless remote measurement system of drill hydrology based on GPRS were introduced in this paper.
针对某大型武器装备系统庞大、故障检测难的特点，提出一种基于无线遥测技术的在线监测与故障诊断方案。
The principle and design method of practical drive circuit for GTR with self protection is introduced. The withdraw saturation protection of this circuit is also tested.
介绍了一种实用的GTR自保护驱动电路的原理及设计方法，并对该电路的退饱和保护功能进行了测试。
The operating principle and design method of a new manual tool are introduced. An intermittent revolution mechanism is applied to the tool to improve screwing efficiency.
介绍一种新型手用工具的工作原理及设计方法。该工具运用了一种新型棘轮换向机构，可提高手工攻丝或拆装螺纹工件的工作效率。
After deeply research on design principle and design method of plank furniture, a computer-aided plank furniture design system is developed by using object-oriented method.
本论文对板式家具的设计原理和设计方法进行了深入的分析研究，并应用面向对象技术，开发了面向对象的计算机辅助板式家具设计系统。
Using the mechanism of the piezoelectric effect of piezoelectric materials to design a piezoelectric actuator bar master, and analyze its working principle and design method.
利用压电材料的压电效应机理，设计出一种压电主控作动杆件，分析其工作原理和设计方法。
It is introduced the characteristics of the clustered control system of intelligent charger based on PC and 80c196kc. System hardware principle and design method are expounded.
介绍了以PC机和80C196 KC为核心的智能充电机集群控制系统的特点，详细阐述了系统的硬件原理和设计方法。
The basic principle and design method on the hole by hole blasting technique are described, and the practical result of this technology in domestic open-pit mine are introduced.
介绍逐孔起爆技术的基本原理、设计方法以及逐孔起爆技术在露天矿山生产中的良好效果。
The principle and design method of the cab tilting mechanism together with the advantage and disadvantage has been pointed out in this paper by a type of light-truck cab as an example.
以某轻型载货汽车的驾驶室翻转机构为例，简要地阐述轻型载货汽车驾驶室翻转机构的结构特点、工作原理和设计方法以及其优、缺点。
This paper briefly describes the principle and design method and application and prospect of ci. In addition, the situation and countermeasures of ci in the fuze profession are also presented.
精练的阐述了CI原理与设计方法，应用及其前景，并对引信行业CI现状和对策进行阐述。
Two novel fibre devices, fibre optic frequency shifter and fibre optic polarization controller, are employed in this system. The principle and design method for the two key devices are described.
在该系统中采用了自行研制设计的实现全光纤化的两个关键光纤元件：普通单模光纤频率偏移器和普通单模光纤偏振控制器，介绍了此两光纤元件的基本工作原理和设计方法。
The principle and design method of the lockup mechanism of the cab were explained in this paper by use a type of light truck cab as an example, the advantage and disadvantage were pointed out too.
目前大部分轻型载货车平头驾驶室采用扭杆式翻转机构，该装置要求其锁紧机构必须安全可靠。
The principle and design method of the programmable logic controller (PLC) are introduced in brief. The design strategy of the PLC-based electric control system for ENN 2mn twisting machine is stated.
首先简要地说明了可编程序控制器(plc)的原理及其设计方法，然后提出了采用PLC的ENN2MN扭拧机电气控制系统的设计方案。
In the next installment, I'll discuss refactoring toward design, building on the concepts of composed method and the SLAP principle.
在下期文章中，我将在组合方法和SLAP原则的基础上讨论重构如何推进设计。
应用推荐