The abamectin microcapsules were prepared by in-situ polymerization process in this work, with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively.
采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。
Microcapsules of pendimethalin with a urea-formaldehyde resin wall were prepared by an in-situ condensation polymerization reaction in aqueous medium.
研究了分散、乳化条件及成囊工艺对以脲醛树脂为壁材制备二甲戊乐灵微胶囊状态的影响。
Hollow hydroxyapatite (HAP) microspheres with pores on their surfaces were prepared by in situ conversion reaction of Li-Ca-B glass in phosphate solution.
利用锂钙硼玻璃在磷酸盐溶液中的原位转化反应制备表面多孔的中空羟基磷灰石(HAP)微球。
It is shown that the in situ reduction conditions have great influence on the HDS performance of the prepared catalysts.
原位还原法制备的负载型磷化钼催化剂的加氢脱硫活性高于传统的还原-钝化-还原法制备的催化剂。
Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.
在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。
Materials prepared by in situ synthesis have fine performance.
原位合成的复合材料具有优良的性能。
Polyaniline (PANI) composite films were prepared from aniline monomers by in situ polymerization, acid-doping and layer-by-layer self-assembly through the electrostatic force.
从苯胺单体出发，通过原位聚合、现场掺杂以及基于静电力的层层自组装制备了聚苯胺复合膜。
Phase change microcapsule was prepared by melamine-formaldehyde resin and n-octadecane through in-situ polymerization.
采用原位聚合法用三聚氰胺-甲醛树脂包覆正十八烷，制备出相变微胶囊。
The microencapsulated phase change materials were prepared with in situ polymerization using dodecanol as the core, melamine-formaldehyde resin as the shell.
本文采用原位聚合法以十二醇为芯材，以三聚氰胺-甲醛树脂为壁材，制备微胶囊相变材料并对其进行性能表征。
Modified PVC prepared through in-situ polymerization and by utilizing ACR is a pioneer in China, which has a significant effect on improving technical level of PVC industry.
通过原位聚合采用ACR改性聚氯乙烯在国内属首例，对提高聚氯乙烯行业的技术水平有着重要作用。
The Metal Matrix composites, prepared by in-situ reaction composite technology, can normally achieve higher mechanical properties than other traditionally prepared composites under the same condition.
利用原位反应合成法制备金属基复合材料，在同等条件下，其力学性能一般都高于强制法制备的复合材料。
Two parts were included in this study, Microencapsulation of rose perfume with urea-formaldehyde resin wall were prepared by in-situ method in the first part.
本文研究工作分为两部分，第一部分是用原位聚合法以脲醛树脂为壁材制备缓释型香精微胶囊。
A new type of strongly polar organic polymer porous layer open tubular column (OPPLOT-A) was prepared by in situ copolymerization of acrylonitrile and divinylbenzene.
以丙烯腈为单体，二乙烯苯为交联剂，采用原位聚合法制备出了强极性的有机高聚物多孔层开管柱- OPPLOT - A型柱。
Rare earth sulfide polystyrene nanocomposite materials were prepared by in situ synthetic method.
采用原位合成法制备了稀土硫化物—聚苯乙烯纳米复合材料。
The photochromic microcapsules were prepared by in-situ polymerization, using melamine-formaldehyde resin as wall materials and photochromic materials as core materials.
以密胺树脂为壳材、结晶紫内酯-硬脂酸-十四醇组成的热敏变色材料为芯材，采用原位聚合法制备热敏变色微胶囊。
The photochromic microcapsules were prepared by in-situ polymerization, using melamine-formaldehyde resin as wall materials and photochromic materials as core materials.
采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。
The typical technologies of impact modified polypropylene(PP)prepared in-situ in reactor were reviewed.
综述了反应器内生产抗冲改性聚丙烯（PP）的典型工艺。
A cinchonine imprinted chiral monolithic column was prepared for the separation of the diastereomers of cinchonine and cinchonidine by in situ molecular imprinting technique.
采用原位分子印迹技术，单步制备了一种辛可宁印迹的手性整体柱。
High scattering optical transmission PMMA was prepared by the in situ copolymerization of methyl methacrylate and styrene with polystyrene.
将聚苯乙烯溶解在甲基丙烯酸甲酯单体或其与苯乙烯的混合液中进行原位聚合，制备高散射有机玻璃导光材料。
Microcapsules loaded with tetradecane as the core material are prepared by in-situ polymerization methods.
研究采用了以三聚氰胺-甲醛为壁材，正十四烷为芯材原位聚合法制备微胶囊相变材料。
We prepared Cortex fraxini thermosensitive in-situ-forming eye gel with 29% P407.
采用29%的P407，制得秦皮眼用温敏即型凝胶。
PU/organomontmorillonite nano-composite(OMMT) was prepared by in-situ intercalative polymerization.
采用原位插层聚合法制备PU/有机蒙脱土（OMMT）纳米复合材料。
Microcapsules were prepared through two-step and one-step in situ polymerization method, with urea-formaldehyde as wall material, and tetrachloroethylene as core material.
以尿素-甲醛为壁材，四氯乙烯为芯材，通过两步原位聚合法和一步原位聚合法制备微胶囊。
The polyimide nano-composite films with different concentrations of carbon nano-tube were prepared by means of ultrasonic blending and in- situ polymerization.
以超声分散塬位聚合的方法制备出不同碳纳米管含量的碳纳米管，聚酰亚胺功能复合材料膜。
The crystallization behavior of rare-earth luminous polycaprolactam(PA6) prepared through in-situ polymerization was investigated by DSC.
以原位复合方法合成的稀土发光聚己内酰胺（PA6）为研究对象，用差示扫描量热仪（DSC）研究了其结晶行为。
Microcapsules for electrophoretic display were prepared by in situ polymerization of urea and formaldehyde without pre-treatment.
用一步原位聚合法制备了电泳显示微胶囊。
In this paper, three different kinds of polyazomethines(PAM)/nylon 6 in situ polymerization composites were prepared using the process of monomer casting.
本文利用三种聚甲亚胺的单体与尼龙6单体通过原位聚合反应，制备了三种聚甲亚胺/尼龙6原位聚合复合材料，制备工艺采用浇铸法。
The abamectin microcapsules were prepared by in-situ polymerization process in this work, with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively.
以密胺树脂为壳材、结晶紫内酯-硬脂酸-十四醇组成的热敏变色材料为芯材，采用原位聚合法制备热敏变色微胶囊。
PLA-PCL/ramie fabric composite was prepared by means of in-situ polymerization.
采用原位聚合法制备了聚乳酸-聚已内酯（PLA-PCL）／苎麻复合材料。
Microencapsulated disperse dyes of S, SE and E types with double layered wall were prepared by in-situ polymerization.
分别对高、中、低三种温度类型分散染料，采用原位聚合法进行双层造壁微胶囊化；
应用推荐