Methods Core tablets containing osmotic active agent were prepared by direct compression and spray coated with swelling layer and semipermeable membrane subsequently.
方法粉末直接压片法制备含渗透活性物质的片芯，滚转包衣锅法分别包溶胀层和控释衣层。
CONCLUSION 5 ASA Enteric time controlled released tablets can be prepared by using adequate core and coating.
结论采用合适的片芯和包衣，可制备5氨基水杨酸肠溶定时释放片。
The fragrant microcapsule was prepared with gelatin and Arabic gum as the wall material and rose essence as core by compounding and coagulation.
以明胶和阿拉伯树胶为微胶囊的壁材，玫瑰香精为芯材，采用复凝聚法制备香精微胶囊。
Microcapsules were prepared by interfacial polymerization, with adipoyl chloride-triethylenetetramine as wall material, and tetrachloroethylene as core material.
以己二酰氯-三乙烯四胺为壁材，四氯乙烯为芯材，通过界面聚合法制备微胶囊。
Silicon core pipe was prepared with HDPE and silicone resis as the main materials.
以HDPE和硅胶母料为主要原料，制备了硅芯管。
The photochromic microcapsules with melamine resin as wall material and spirooxazine as core material were prepared by situ polymerization.
以螺恶嗪为芯材，用原位聚合法制备了蜜胺脂为壁材的光致变色微胶囊。
The ceramics core was prepared by extrusion moulding applied in the titanium alloy golf club head.
利用挤压成型的方法，制备了应用于钛合金高尔夫球杆头精密铸件的陶瓷型芯。
A open cell polyurethane rigid foam for vacuum panel core material was prepared. The open cell percent of the core material is about 95%.
制备了用于聚氨酯真空隔热板的开孔硬泡芯材，该泡沫芯材的开孔率达95%。
The prepared core pipe with 75mm to 360mm of inside diameter and 7mm to 30mm of wall thickness can replace various paper core pipes, thereby having a wide popularization and application prospect.
用其制备成的内径75～360毫米、壁厚7～30毫米的芯管，可以取代现有各种纸质芯管，具有广泛推广应用前景。
Microcapsules of paprika oleoresin were prepared by spray-drying technology using paprika oleoresin as the core material, modified starch and gelatin as the wall materials, dextrin as the filler.
以辣椒红色素为芯材，变性淀粉和明胶为壁材，糊精为填充剂，研究微胶囊化辣椒红色素的制备工艺。
A new water soluble core-mould material was prepared by blending of phosphate ester starch and different fillings.
将磷酸酯淀粉与刚性填料，通过共混制备了新型的水溶性芯模材料。
The microcapsule used for paper was prepared using nature macromolecule material sodium alginate and chitosan as wall and a colorless dye oil as core by complex-coacervation.
采用天然高分子物质壳聚糖、 海藻酸钠为壁材，无色染料油溶液为芯材，通过复合凝聚法制备纸用微囊。
The microencapsulated phase change materials were prepared with in situ polymerization using dodecanol as the core, melamine-formaldehyde resin as the shell.
本文采用原位聚合法以十二醇为芯材，以三聚氰胺-甲醛树脂为壁材，制备微胶囊相变材料并对其进行性能表征。
Microcapsules loaded with tetradecane as the core material are prepared by in-situ polymerization methods.
研究采用了以三聚氰胺-甲醛为壁材，正十四烷为芯材原位聚合法制备微胶囊相变材料。
Through analysis and experiments, a set of feasible dyeing and finishing process of viscose chenille yarn with reactive dyes is prepared for eliminating the white core and achieving even dyeing.
对提高全粘雪尼尔纱芯绒的同色性、消除白芯现象进行分析，实验，制定了一套比较可行的染整工艺。
Microcapsules were prepared through two-step and one-step in situ polymerization method, with urea-formaldehyde as wall material, and tetrachloroethylene as core material.
以尿素-甲醛为壁材，四氯乙烯为芯材，通过两步原位聚合法和一步原位聚合法制备微胶囊。
By in-liquid drying, sustained-release pellets were prepared taking Eurdragit RL100 as coating material and drug-resin complex as core.
以丙烯酸树脂RL 100为包衣材料，采用乳剂-溶剂挥发法，制备了以药物-树脂为丸芯的缓释微丸。
The photochromic microcapsules were prepared by in-situ polymerization, using melamine-formaldehyde resin as wall materials and photochromic materials as core materials.
以密胺树脂为壳材、结晶紫内酯-硬脂酸-十四醇组成的热敏变色材料为芯材，采用原位聚合法制备热敏变色微胶囊。
Acrylate copolymer latex of core-shell structure with rich fluorine in shell was prepared using SDS and OP-10 as emulsifier.
以十二烷基硫酸钠和OP-10为混合乳化剂，制备了壳层富含氟的核壳结构丙烯酸酯共聚物胶乳。
Slow-released microcapsule anti-mosquito finishing agent was prepared using polyurethane as wall and anti-mosquito finishing agent HLQZ as core by interfacial polymerization.
研究了自制乳化剂、芯壁比、反应温度以及催化剂用量对合成防蚊整理剂的影响。
Objective To determine the core knowledge that all masters-prepared nurses should possess, in order to provide basis for curriculum development.
目的初步调查护理学硕士研究生应具备的核心知识，以便根据核心知识组织该专业的基础课程体系。
The microcapsule was prepared using yeast extract-sodium alginate-chitosan as wall and self-made fish oil as core by layer-by-layer(LBL) assembling technique.
采用酵母浸膏-海藻酸钠-壳聚糖为壁材，以自制南海低值鱼鱼油为芯材，采用层-层（LBL）组装技术制备鱼油微胶囊产品。
Low temperature self-cross-linking formaldehyde-free binder for pigment printing is prepared by means of core-shell emulsion polymerization.
采用核壳乳液聚合的方法制备低温自交联的无甲醛涂料印花粘合剂。
A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization.
用核-壳乳液聚合方法制备了室温成膜低voc丙烯酸类上光涂料。
PET/EVOH sheath-core fiber was prepared and the optimal spinning parameters were obtained.
对复合PET/EVOH吸湿纤维进行纺丝实验，得到最佳的纺丝工艺参数。
He has prepared a special core sand and solved the problem of cleaning blind holes successfully.
配制了专用芯砂，成功地解决了异型盲孔的清砂问题。
By using a new emulsion making technique, a core-shell AgX emulsion for color negative red-sensitive layer was prepared successfully with photographic characteristics significantly improved.
采用新型乳剂制备技术，研制出彩色底片感红层核壳型乳剂，其照相性能得到明显的改善。
A sandwich structure fire-retardant particleboard, which aimed for the core material of fireproofing doors, was prepared in laboratory using heat-expanded vermiculite as a fire-retardant material.
本研究采用膨胀蛭石作为阻燃剂，在实验室试制出了用作防火门芯层材料的三明治结构阻燃刨花板。
Orthogonal test indicates that reaction temperature and shell-core ration is essential elements which affect paraffin content of microencapsulation in prepared process.
正交实验表明反应温度和壳芯比是影响微胶囊石蜡含量的主要因素。
Orthogonal test indicates that reaction temperature and shell-core ration is essential elements which affect paraffin content of microencapsulation in prepared process.
正交实验表明反应温度和壳芯比是影响微胶囊石蜡含量的主要因素。
应用推荐