Heat management, power supply, and drivers-the bulbs' controlling circuit boards-get more complex.
负责散热控制、电源和驱动的灯管控制电路会变得更为复杂。
The power supply circuit, driving circuit, display circuit, software design and signal collection of the control system are outlined.
概述了控制系统的电源电路、驱动电路、显示电路与软件设计及信号采集的方法。
Hardware system is made up of three modules: power supply circuit, digital control circuit and machine control circuit.
控制系统主要由电源电路、数字控制电路和机械控制电路三大模块构成。
Low-power oriented design techniques include selecting low-power parts, low operation voltage, managing clock of MCU or making MCU turn into dormancy, managing power supply of circuit and so on.
低功耗设计的关键技术包括选用低功耗的各类器件,低工作电压,对MCU进行时钟管理或休眠,对各部分电路和器件进行电源管理等。
The probe of the eccentricity sensor is designed. The problems such as power supply needed by oscillating circuit and signal transmission from rotary part to stationary part are solved.
完成了偏心传感器探头的设计并解决了偏心传感器振荡电路的电源供应问题和信号从旋转部件到静止部件的传输问题。
High frequency switching power supply made from it can not only simplify the circuit, but also can improve the EMC characteristics and reduce the cost.
采用它制作高频开关电源,不仅简化了电路,同时可以改善电源的电磁兼容性能,且降低了制作成本。
Partial Pressure Connection: the varistor of the two fixed end of the bipolar power supply, respectively connected by a sliding side and either a fixed terminal connected to the circuit.
分压接法:将变阻器的两个固定端分别与电源的两极相连,由滑动端和任一固定端连接到电路。
Maintenance department: maintenance industries circuit boards, machine equipment system, main board, controller, power supply, frequency converter, PLC and touch screen.
维修部:维修各行业电路板,机加工设备系统,主板,控制器,电源,变频器,PLC触摸屏等。
In the case of repetition mode of the pulse power supply, Fast charging circuit is designed to enhance the stabilize and charging efficiency of the DC power supply.
为满足脉冲电源重复频率运行时直流电源的稳压性问题,设计了晶闸管快速充电自停自补单元,同时也提高了整个电源系统的效率。
Double circuit power supply and emergency generator for the building.
大厦采用双回路供电,配有应急发电机。
The experimental results prove that the power supply simplifies the circuit, reduces the cost and improves the operation reliability, moreover it is easy to realize and regulate.
实践表明,该电源简化了电路,降低了成本,提高了运行可靠性,且简易可行,调节方便。
Next the design process of this power supply, which include the main circuit design, control and auxiliary circuit design, are introduced in detail.
接着详细介绍了电力操作电源的设计过程,包括主电路的设计以及控制电路的设计。
Among them still include the design of the watchdog electric circuit and the design of the power supply electric circuit.
其中还包括看门狗电路的设计和电源电路的设计。
Timing circuit is usually made up of power supply unit, panel circuit and timing board, it is the digital control part of power source.
定时电路一般由电源模块、面板电路和定时板组成,是功率源中的数字控制部分。
The strong electromagnetic interference generated in high power TEA CO2 laser system mainly comes from the main discharge circuit, pulse spark switch and power supply.
大功率TEACO2激光器系统产生的强电磁干扰主要来源于激光器主放电回路、脉冲火花开关和电源。
At least 3 years design experience of power supply circuit, analog circuit, digital circuit, MOSFET circuit and MCU circuit.
3年以上电源产品,模拟数字电路设计经验,熟悉mcu,MOSFET等元器件。
This paper introduces a design method and circuit of power supply with high voltage and high frequency response for driving capacitive load.
本文介绍了一种可带容性负载的高电压、高频响激励电源的设计方法及相应的实现电路。
This article introduces a plasma discharge power supply for industrial equipment, and gives the design process of the main circuit and power stability circuit.
文章介绍了一种用于工业设备的等离子体放电电源,给出了主电路、功率稳定电路的设计过程。
The flowmeter provides one core cable to supply power for the packer and downhole circuit of the flowmeter, at the same time, the signal transmit through the cable.
流量计采用单芯电缆完成对井下集流器、电路板供电,同时单芯电缆还完成两路流量信号、压力及温度信号的传输。
In this paper, by the use of dual-current control mode and intelligent UC3842 chip as the core, a single-chip switching power supply circuit are presented.
本文使用双电流控制模式,以智能芯片uc 3842为核心,设计了单片开关电源的实用电路。
This paper introduces the design of high power supersonic inverting power supply, including main circuit, controlling circuit, driving and protecting circuits, and gives experimental results.
主要介绍一种大功率超声波逆变电源装置的主电路、控制电路、驱动与保护电路的设计,并给出实验结果。
The power supply module provides the control circuit, the drive of frequency conversion circuit, transaction circuit and DSP with different power supply.
电源模块为系统控制电路、变频驱动电路、变送电路、DSP芯片提供不同要求的电源。
Its principal circuit is that of single power supply and the control circuit takes the high-performance monolithic computer 80c196kc as its kernel to implement automatic control of hardfacing process.
主电路为单电源供电,控制电路以高性能单片机80c 196kc为核心,实现了对喷焊过程的自动控制。
This paper studied control system with the center of SPCE061A MCU, including the drive and soft-start circuit of two power supply, the key and distance control of the cleaner.
以SPCE061A单片机位核心,研制了高效、适用的控制系统,包括两个电源的驱动、软启动、净化器的按键及遥控等电路。
This text introduces category and reason of electrical breakdown, deals with the methods of checking up the power supply, electric circuit and equipment and gives out some concrete countermeasures.
介绍了电气故障的种类、产生的原因,详述了电源、电路、设备和元件故障的查找方法,对常用电气设备的故障原因、查找方法,做了具体的叙述。
The main circuit consists of the switching power supply, the main control circuit, and the power circuit.
本课题硬件结构主要包括开关电源,主控电路、功率电路三部分。
The paper mainly introduces the design method of power supply and earth-leakage circuit for the electric-coal-drill integrated unit.
本文主要介绍煤电钻综合装置电源与漏电保护电路的设计方法。
Abstract: Trigger circuit, power supply circuit, clocking circuit and reset circuit are the main circuits on the main board.
摘要:触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。
Trigger circuit, power supply circuit, clocking circuit and reset circuit are the main circuits on the main board.
触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。
Trigger circuit, power supply circuit, clocking circuit and reset circuit are the main circuits on the main board.
触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。
应用推荐