The OTDAS optimally decompose the task of power plant control system through an optimizer agent and a decomposer agent.
OTDAS通过一个优化代理和一个分解代理对火电厂多代理控制系统的任务进行了优化分解。
Combining fuzzy control with expert system, author presents an expert adaptive fuzzy controller and its application for a 500mw power plant boiler water level control.
本文将模糊控制与专家系统结合起来，提出了专家自适应模糊控制器，并将其应用于500MW机组仿真机锅炉水位控制中。
Based on the system partition of the large area of production control and the area of management information, the system partition framework of the nuclear power plant is established.
以电力监控系统安全防护要求所建立的生产控制大区与管理信息大区的系统分区，较成体系地构建了核电厂的系统分区框架。
According to the characteristics of the two system of the power plant, the production control area is divided into the control area (safe I area) and the non control area (safe II area).
根据电厂二次系统的特点，生产控制大区被分为控制区(安全I区)和非控制区(安全II区)，各分区包含不同的具体业务。
The control quality of system of combustion control system is directly related to the safe and economic running of the power plant.
整个燃烧控制的系统的控制品质都直接关系到整个机组的安全和经济运行。
By analyzing the running mode adjusting condition in the fire-power plant of central air condition control system, this paper expatiated how to use PLC to control it.
对火电厂中央空调控制系统的运行调节中如何采用可编程序控制器(PLC)控制进行了阐述。
The speed governor system is one of the key control systems in a pumped storage power plant.
蓄能电厂调速器系统是电站控制设备中一套关键的控制系统。
The idea of this paper is from the project of HuangNeng NanTong Power Plant, which mainly deals with the integration of control system for fuel dock and MIS construction.
论文背景来源于企业委任项目——华能南通电厂燃运公司输煤控制系统与计算机信息管理系统的整合。
Exemplified by Iran's SAHAND Power Plant, the design and application of a control system for dry cooling systems of auxiliaries is being explained.
以伊朗SAHAND电厂为例，介绍干冷式辅助冷却控制系统的设计和应用。
The developing trend that digital instrument and control( I&C ) system will supplant traditional analog I&C system in nuclear power plant is emphasized.
在核电站应用数字化仪表与控制（I&C）取代模拟I&C系统，已成为必然的发展趋势。
According to the specific system of nuclear power plant, the management control area is divided into safe III area and safe iv area.
管理控制大区依据核电厂特有系统组成，被划分为安全II I区和安全IV区。
This paper briefly introduces and analyzes the control mode and function of bypass control system for combined cycle units in Huizhou LNG Power Plant.
对惠州液化天然气(LNG)电厂联合循环机组旁路控制系统的调节方式、控制方式及其作用进行了简单的介绍和分析。
For the production control system, the nuclear power plant is different from the traditional thermal power plant lies in the DCS system.
对于生产控制系统而言，核电厂区别传统火电厂之处便在于DCS系统。
The existing problems and influencing factors of the reheated steam control system of No. 4 Unit in Zhangjiakou Power Plant are presented.
介绍了河北省张家口发电厂4号机组再热汽温调节系统存在的问题及其影响因素。
Based on the defect analysis of the PLC coal conveying control system in power plant, this paper puts forward a new method for on line defect judgement of the control system.
在对PLC网络控制的火电厂输煤控制系统的故障分析基础上，提出了一种在线判别系统故障的新方法。
Introduces a way to control air compressor system of power plant with programmable controller. The programming design is made.
介绍了利用可编程序控制器对热电厂空压机系统进行控制的方法，进行了软件设计。
The performance of those control system during plant transient testing at 30 % of full power reach the requirement of the plant normal operation.
在30 %额定功率运行时所作的全厂瞬态试验表明，五个控制系统基本上达到了电厂运行要求。
This paper presents the development of a visual configuration system used for a full CRT fossil power plant training simulator, which utilizes advanced distributed control system(DCS).
介绍了最新研制的基于分布式控制系统（DCS）的火电站全CRT仿真培训装置中热力系统控制回路的可视化组态软件系统。
The sequence control system (SCS) is a kind of relatively advanced control measures used for interlock protection of auxiliaries in power plant.
顺序控制系统(SCS)是用于辅机联锁保护的一种较为先进的控制手段。
A fuzzy multi-model control method is proposed for the characteristics of the super-heated system with time varying and nonlinearity in the power plant.
针对火电厂锅炉过热系统的时变和非线性的特点，提出了模糊多模型的控制方法。
For the security and economic of power plant, research the new control method which can overcome the disadvantages of traditional superheat steam temperature control system has important meaning.
研究能克服传统过热汽温控制系统的缺点的新型控制方法，对于电站运行的安全性和经济性有十分重要的意义。
This paper analyze the steam turbine control system of Huaneng Luohuang Power Plant, have introduced the major characteristic of control system.
本文通过对华能珞璜电厂汽轮机控制系统的分析，介绍了控制系统的主要特点。
The main function of the control system in a solar thermal power plant is to control and monitor the status of the whole system.
在聚光类太阳能热发电系统中，控制系统的主要功能是控制和监测整套太阳能热发电系统的运行状态。
The paper gives an account of the application of an automatic control system for adding acid to an ash water yard in the power plant of the Anqing Petrochemical Factory.
本文介绍了自动加酸控制系统在安庆石化热电厂灰场排水中的应用。
Because the coal pulverizing storage system is a main electric consumer in power plant, there is practical meaning for how to improve its automatic control level for lower electric consume.
锅炉中间储仓式制粉系统是电厂的耗电大户，如何考虑制粉系统的自动控制以降低制粉系统的制粉单耗具有重要的实际意义。
This paper discusses the considerations in the modeling of a new type of nuclear power plant for its control system simulation in a wide power range.
针对研发的采用一体化布置、全功率自然循环的低温核反应堆电站，建立了一个可用于大功率运行范围控制系统仿真的动态数学模型。
The control quality of the three subsystem of boiler combustion control system is directly related to the safe and economic running of the power plant.
锅炉燃烧控制的三个子系统，即燃料量控制回路、送风控制回路和引风控制回路的控制品质都直接关系到整个机组的安全和经济运行。
DIAS system can provide good technical supports to the design and improvement of man-machine interfaces of the main control room of a (nuclear) power plant.
DIAS系统可以为核电厂主控室人机界面的设计及改进提供很好的技术支持。
The system can be used not only in the control of circulation pumps in steam power plant but also in various water supplies pumping stations.
该系统不仅适用于火力发电厂循环水泵的控制，而且也可用于各类供水泵站的控制。
In operation process of the power plant, when the trip trouble happened in its main auxiliary units, its automatic control system can lower the load quickly and safely.
在电厂机组运行中，其主要辅机故障脱扣，自动控制系统能快速、安全降负荷并稳定机组运行。
应用推荐