The power-factor-correction circuit and the DC/DC converter are realized by average-current control and peak-current control, respectively.
功率因数校正级和DC/DC 变换级分别采用平均电流控制和峰值电流控制方法。
A 300w experimental prototype of power supply with power-factor-correction function based on dual-loop control strategy is presented in this paper.
基于电流和电压的双环控制策略，研制了一台输出功率300w的功率因数校正电源样机。
Among the three-phase power-factor correction circuits, the full decoupling circuit is especially suitable for high power fields because of its high input power and good electrical performance.
在三相功率因数校正电路中，全解耦型电路由于其输入功率大，电气性能较好等优势特别适用于大功率场合。
As the heart of the power factor correction circuit, the gain modulator gets a high power factor by controlling the input current.
增益调制器作为功率因数校正电路的核心电路，通过控制输入电流来得到一个高的功率因数。
A proposal using passive power factor correction method to reduce harmonics emission is introduced in this paper.
介绍了一种采用无源功率因数校正方法降低电源谐波含量的方案。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
To reduce the component counts and the cost, the single-stage power factor correction (PFC) techniques have attracted more and more attention.
在低功率应用中，为了减少器件和成本，单级功率因数校正(PFC)技术越来越受到人们的关注。
Zero current transition (ZCT) topology of the single switch three phase boost power factor correction (PFC) rectifier is proposed.
提出了一种零电流开关结构的单开关管的三相升压功率因数校正整流器。
Active Power Factor Correction to meet EMC limits for harmonic current emissions, and limitations of voltage fluctuations and flicker.
有源功率因数校正满足EMC的谐波电流的排放限制，以及满足电压波动和闪变的限制。
Theoretical analysis shows that the CUK circuit has inherently the features of power factor correction and soft turn off switching.
理论分析得出了CUK电路具有固有的功率因数校正和软关断开关特性。
Power factor correction (PFC) technique based on SEPIC converter is researched in this paper.
本文对基于SEPIC变换器的功率因数校正技术进行了研究。
The principle of active power factor correction circuit operated in critical inductor current mode is analyzed in this paper in detail.
文中详细分析了电感电流准连续模式的有源功率因数预校正电路的工作原理。
The power factor correction (PFC) and half-bridge inverter circuit topology are commonly used in modern high power factor electronic ballasts.
现代高功率因数电子镇流器结构中普遍采用功率因数校正（PFC）和半桥逆变谐振电路拓扑。
The new approaches for charge pump power factor correction (PFC), digital PFC and on - line UPS with PFC are introduced.
介绍了充电泵功率因数校正（PFC）、数字PFC和带PFC的在线UPS的几种新方法。
Distribution transformer adds power factor correction capacitor in the secondary side to collect compensate, so as to advance power factor and augment the load capacity of transformer.
配电变压器二次侧增设移相电容器进行集中补偿，提高了功率因数，增大了变压器的负载能力。
A novel low conduction loss circuit that can be used for power factor correction is presented in this paper.
本文给出了一种可用于功率因数校正的新型低通态损耗电路。
Principle and class of active power factor correction(APFC) are introduced.
主要介绍了有源功率因数校正（APFC）的工作原理、电路分类。
This paper discusses the principle of power factor correction (PFC) and describes the realization of a PFC rectifier.
本文介绍功率因数校正(PFC)原理，以及一个PF C整流器的实现。
A novel ZVT power factor correction circuit is proposed, in which the saturable core and the-capacitor are added to the auxiliary switching network.
提出一种新型ZVT功率因数校正电路，将饱和电感和并联电客加入辅助开关网络中。
Passive Power factor correction circuit, two-stage and single-stage APFC circuits are researched, which applications are given by comparison of their performance.
对无源pfc电路、有源两级PF c电路和有源单级PF C电路进行了分析及性能比较，指出它们分别适用的场合。
This paper introduces the principle of active power factor correction (APFC), circuit-topology, control strategy and soft-switching technology, and predicts the tendency of APFC.
综述了APFC技术的基本原理，拓朴电路，控制策略及软开关技术，并预测了其发展趋势。
The active power factor correction(APFC) technology is introduced into the DC energy storage unit ofUPQC for capacitive voltage control.
将有源功率因数校正技术引入UPQC直流储能单元的电压控制。
The working principle and characteristic of the Boost power factor correction (PFC) circuit operating in critical conduction mode are investigated.
介绍了临界模式功率因数校正电路的工作原理和特点。
The model setting up method of the three module which include power factor correction circuit, two-transistor forward converter, secondly chopper circuit, is discussed in detail.
分别讨论了功率因数校正模块、双正激变换电路模块和二次斩波模块的建模方法。
Describes a power factor correction (PFC) circuit, in which the power circuit is a boost converter controlled general switch mode controller IC.
介绍了一种用普通开关电源专用集成电路控制块作为控制电路，以升压式变换器作为功率电路的功率因数校正电路。
To enhance the performance of UPQC, active power factor correction (APFC) technology is introduced into the DC energy storage unit of UPQC for capacitive voltage control.
为了进一步提高UPQC的性能，将有源功率因数校正(APFC)技术引入UPQC直流储能单元的直流电容电压控制，详细阐述了其工作原理，并给出了仿真实验结果。
Power factor correction technology is an effective method of restraining harmonic currents and increasing power factor, which has been attended more and more in recent years.
功率因数校正技术是抑制谐波电流、提高功率因数的行之有效的方法，近年来受到了越来越多的关注。
As an effective way of eliminating high frequency harmonic, active Power Factor Correction (PFC) technology has been deeply researched and has broad application.
有源功率因数校正技术(PFC)作为一种有效的谐波抑制方法，得到了广泛而深入地研究与应用。
A critical current mode based on the peak current control technology to achieve switching power supply power factor correction task is proposed.
提出了一种基于临界电流模式的峰值电流控制技术来实现开关电源的功率因数校正任务。
The simulation result proves: Used this converter's topology structure, the envelope curve of import electric current follows entering voltage change. And power factor correction has been realized.
仿真分析结果证明：该变换器拓扑结构能够使输入电流的包络随着收入电压变化，有效的实现了功率因数校正。
应用推荐