The traditional manufacturing methods include powder-sintering, melt-spinning and cold-stretching, thermally induced phase separation, state track etching, non-solvent induced phase separation, etc.
微孔材料的传统制造方法有粉末烧结法、熔融拉伸法、径迹蚀刻法、非溶剂致相分离法等。
Powder can be spread onto a tray and then solidified in the required pattern with a squirt of a liquid binder or by sintering it with a laser or an electron beam.
将粉末洒向一个托盘，然后用一小盘液体粘合剂把粉状物按需要的形状进行固化，或者用激光器或电子束管将其烧结成所需形状。
Powder metallurgy (Fig. 5.1) USES sintering process for making various parts out of metal powder. The metal powder is compacted by placing in a closed metal cavity (the die) under pressure.
粉末冶金(图5.1)采用烧结工艺将金属粉末制成各种各样的零件。金属粉末放在封闭的金属腔(模具)中在压力下被压实。
A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列激光烧结实验。
This paper analyzes the influences of carbon, silicon and aluminium on the surface reaction when sintering austenite stainless steel powder.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
In powder forging an as-pressed component is usually heated to a forging temperature significantly below the usual sintering temperature of the material and then forged in a closed die.
在粉末锻造中，压制零件一般加热到远低于该材料通常烧结温度的锻造温度，然后在闭模中锻造。
Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illustrated.
本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
A series of experiments are carried out with selective laser sintering (SLS) for copper, copper nickel powder materials.
采用激光选区烧结的方法，对铜、镍-铜混合粉末进行了一系列激光烧结试验。
A type of furnace especially for powder metallurgy pressed sintering is introduced.
介绍了一种专用于粉末冶金加压烧结的炉型。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面，成功获得覆层材料。
The results indicated that the properties of alloys were greatly increased under certain proportions of nanometer Ni powder and sintering temperatures.
结果表明，在适当比例的纳米镍粉及烧结温度下，合金的性能得到很大的提高。
The densification process of metal powder presented here is different from those of powder forging, cold or hot isostatic pressing, and traditional compacting sintering.
本文提出的金属粉末致密化工艺与传统的压实烧结致密；冷热等静压致密：粉末模锻的致密化工艺不同。
Effect of superfine Ni powder addition on the sintering process and final properties of driven gears was studied.
研究了经超细化处理的镍粉对从动齿轮烧结工艺和性能的影响。
The processes of rapid forming solid parts by laser sintering ceramic powder include laser sintering and second sintering post treatment.
激光烧结陶瓷粉末快速成型三维零件的过程包括激光烧结和二次烧结后处理两个步骤。
A support material with low expansivity and high conductivity, called DG alloy, was prepared by powder metallurgy. The effects of sintering process on its properties and microstructure were studied.
采用粉末冶金技术制备了一种低膨胀高导热支撑材料(简称DG合金)，研究了烧结工艺对合金组织和性能的影响。
So that, it is necessary to adopt very sinterable UO2 powder and suitable pelleting and sintering conditions to minimize open porosity and small porosity.
因此，必须采用烧结性良好的UO_2粉末和合适的成型烧结条件以使开口孔隙度和细孔隙度降至最低。
Three basic ways to restrain the abnormal grain growth were suggested such as pretreatment of the starting fine powder, improving the sintering agents and adding other hard material powders.
举例说明了对原料金刚石微粉进行前处理，选择合适的烧结助剂，以及在原料金刚石微粉中添加少量其它物质，是抑制金刚石异常粒成长的三种基本方法。
Powder sintering: mixture, powder manufacturing, blending, pressing and vacuum or anti-vacuum sintering for all kinds of samples.
粉末烧结：各种粉末样品的配料、制粉、混料、压制、真空或非真空烧结等。
Research progresses of metallic powder materials and nano powder materials fabricated by selective laser sintering (SLS) were reviewed in brief.
综述了选择性激光烧结金属粉末材料和纳米粉末材料的研究进展。
The effect of the performance of raw powder and process parameter such as sintering time & temperature , heat treatment time & temperature on the plastication of tungsten alloys has been studied.
研究了原料粉末性能、烧结温度和时间、热处理的工艺参数对高密度钨合金的塑性的影响。
The new PM technology has been introduced, such as superfine powder manufacture, rapid solidification processing, mechanical alloying, liquid phase sintering, rapid consolidation etc.
本文叙述了新的PM技术如超细粉制造技术、快速凝固制粉技术、机械合金化技术、液相烧结技术、快速固结技术等。
Some factors effecting the porosity of porous tungsten, such as powder size, press pressure, sintering temperature, and so on, are discussed in detail.
研究了粉末粒度、压制压力及烧结温度等对多孔钨孔隙度的影响。
Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
The porous superalloy material with hollow spherical pores was fabricated by means of metal powder sintering using nickel-base superalloy powders.
采用含有机物的镍基高温合金原粉，用粉末烧结法制备了球形多孔高温合金材料。
The agglomeration behavior of powder and the effect of agglomeration on compaction and sintering were studied in detail.
对粉料的团聚行为和团聚对成型、烧结的影响作了深入的研究。
At present, its preparing technologies mainly contain powder sintering technology, melt infiltration technology, Aluminum alloy directly oxidizes at high temperature technology.
目前它的制备工艺主要有粉末烧结工艺、熔体浸渗工艺、铝合金高温直接氧化工艺。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
应用推荐