The position sensor of the system is synchro.
所以本系统的位置检测通过自整角机完成。
Position Sensing: Easy access position sensor mounting.
位置感应：轻松存取位置传感器安装。
The complete machine control device is connected with the position sensor.
整机控制装置与位置传感器相连。
There are position sensor windings in addition to armature windings in the motor.
这种电机内部除了电枢绕组以外，还带有位置传感线圈。
Mass Air Flow Sensor and other sensors such as Position Sensor, Temperature sensor etc.
空气流量计及其他传感装置如位置传感器，水温传感器，等。
The application of hydraulic servo and position sensor on stretch bender was introduced.
介绍了液压伺服阀和位置传感器在拉弯矫直机中的应用。
The invention provides a capacitive position sensor with a two-layer electrode structure.
本发明提供一种具有二层电极结构的电容性位置传感器。
This type of rotor position sensor lays a foundation for the closed-loop control of step motor.
这种新型位置传感器为进一步实现步进电动机闭环控制奠定了基础。
In this paper, the study for the two-phase hybrid stepper motor as a position sensor is investigated.
针对二相混合式步进电机固有的特点，对其作为连续角位移测量传感器进行了深入的研究。
A laser position sensor and retro-reflector mounted on the slide bar are employed for the position feedback.
激光位置传感器和反射器安装在就业滑动条的位置反馈。
An inductance type of position sensor is presented and its operating theory and design method are also described.
提出了一种高精度超长位移传感器的理论及设计方法，并在此基础上研制了新颖的电感式位移传感器。
At present, in mostly regulation drive systems, the mostly method is to install a position sensor in the rotor shaft.
当前，在大多数调速驱动系统中，最常用的方法是在转子轴上安装位置传感器。
The state observer observes the precise load torque, rotor position and speed with only a low accuracy position sensor.
状态观测器可以利用较低精度的位置传感器来准确观测负载转矩、转子位置和转速。
The computer is mounted on a mobile trolley unit which contains storage Spaces for the position sensor and other accessories.
该计算机安装在可移动推车上，包括位置检测器和其它附件的存储空间。
The positioning push mechanism comprises a position sensor, a plurality of positioning plates and a plurality of push plates.
定位推送机构包括位置传感器、复数个定位板和复数个推送板。
In the system of sensors, there are 8 electromagnetic induction sensors, 2 Angle sensors 1 position sensor, and interface circuit.
其中传感系统包括8个电磁感应传感器、2个角度传感器和1个位置传感器，以及它们的接口电路。
This paper studies what will happen when there are mechanical and electrical errors in position sensor, and how to decrease errors.
本文分析了位置传感器的机械误差和电气误差对换向的影响，指出了减小换向误差的途径。
If you have a throttle position sensor, you should be able to access the signal from the sensor itself or from the computer connector.
如果你有一个节气门位置传感器，您应该能够访问从传感器从计算机或信号连接器本身。
A basic diagnosis strategy is set and also the signal of the camshaft position sensor is used to judge the cylinder which misfire occurs.
同时结合凸轮轴位置传感器的信号进行判缸，并设定合理的基本诊断策略。
A position sensor based on slit projection is developed. Its measurement principle and application in precision positioning are described.
提出了一种基于狭缝投影的位置传感技术，阐述了此技术的传感原理及其在精密定位中的应用。
The principle of brushless DC motor the control method with position sensor is introduced, and the control system based on DSP is presented.
介绍了直流无刷电机的工作原理和基于位置传感器的控制方法，提出了基于数字信号处理器(dsp)的控制系统。
When obtain piston position signal from Crankshaft, Top Dead Center Sensor and Crankshaft position Sensor tend to be integrative in structure.
从曲轴上获取活塞位置信号时，所使用的上止点传感器及曲轴转角传感器在结构上趋向于一体化。
The change of two dimensional micro distance is measured by using a position sensor and the two dimensional amplification of double optical lever.
利用光电位置传感器和二维双光杠杆放大，能够测量出二维微小距离的变化。
Based on the saturation effect of winding inductance, an estimation method of initial position for SPMLSM without a position sensor was presented.
利用绕组电感饱和效应，即由于磁路饱和引起的电感随动子位置角变化的规律，检测表面式永磁直线同步电机动子的初始位置。
This paper introduces the structure and working principles of the throttle position sensor (TPS), emphasizing on its function and inspection method.
阐述节气门位置传感器(TPS)的结构和工作原理，重点介绍节气门位置传感器的功能和检测方法。
The second one is to adopt optics encode as position sensor, and to use RS-232 criterion interface to make the multifunction control and PC communicate.
其次作者采用光电编码器作为位置传感器并且利用了RS—232标准接口建立了多功能控制器与上位机的之间的位置信息传输；
A polarization modulation technology for a position sensor with grating imaging is presented and its modulation principle is analyzed with Muller matrix.
提出了一种用于光栅成像位置传感器的偏振调制技术，利用米勒矩阵对其调制原理进行了详细的分析。
The incremental magnetic rotary encoder, as a corner position sensor, can be improved its measure accuracy by the way of quadruplicated frequency circuit.
增量式磁旋转编码器作为转角位置传感器，可以用四倍频的方法提高其测量精度。
A demonstration system with DSP as controller used for testing double-axis tracking control techniques is designed by using four-quadrant detector as position sensor.
采用四象限探测器作为位置传感器，设计出以dsp作为控制器的双轴跟踪控制试验演示系统。
The author introduces the structure and working principle of this throttle and elaborates the initializing process of the throttle and the accelerator position sensor.
本文介绍电子节气门系统的结构和工作原理，并对电子节气门和加速踏板位置传感器的初始化过程进行说明。
应用推荐