Polyester modified polyurethane acrylate was prepared.
研究合成了聚酯型丙烯酸聚氨酯。
The synthesis of polyether aromatic polyurethane acrylate and its influencing factors were discussed.
探讨了聚醚类芳香族聚氨酯丙烯酸酯的合成工艺及其性能影响因素。
The UV curable cathodic electrophoretic paint prepared by polyurethane acrylate showed good properties.
所得的聚氨酯丙烯酸酯光固化阴极电泳漆综合性能良好。
In this paper relationship between composition and performance of water based polyurethane acrylate compounded exterior wall coating is analysed.
本文分析了水性聚氨酯丙烯酸酯复合外墙涂料组成与性能关系。
The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent, photoinitiator and pigment.
采用双酚A环氧丙烯酸酯（EA）和聚氨酯丙烯酸酯（PUA）共混，加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
In this paper, the pyrolytic compound of polyurethane acrylate oligomer was analyzed by pyrolytic gas chromatography-mass spectrometry and the pyrolytic mechanism was also discussed.
采用裂解色谱质谱技术对光固化聚氨酯丙烯酸酯齐聚物裂解产物进行了分析，并对裂解机理进行了讨论。
According to the requirement of coatings, yellow zine epoxy primer and two - pack high solid acrylate polyurethane coating are chosen to be containers paints.
根据涂层的要求，选择了锌黄环氧底漆和双组分高固体丙烯酸聚氨酯漆作为厢体的涂料。
The acrylate modification and acrylate organosiloxane compound modification can obviously decrease the degree of micro crystal in the molecular of polyurethane.
利用丙烯酸酯改性以及丙烯酸酯-有机硅复合改性明显降低了聚氨酯分子中硬链段的微区结晶程度。
One of the main methods to improve the polyurethane integration performance by the acrylate modification.
利用丙烯酸酯对聚氨酯进行改性是提高聚氨酯综合性能的主要手段之一。
The characteristics and applications of high-solid alkyd coatings, epoxy coatings, polyester coatings, acrylate coatings and polyurethane coatings are specifically discussed.
详细阐述高固体分醇酸树脂涂料、环氧树脂涂料、聚酯树脂涂料、丙烯酸树脂涂料以及聚氨酯涂料的特点和应用。
At present, alkyd, epoxy resin, polyurethane resin, acrylate and varieties of their modified resins are better domestic resins for waterborne coatings.
目前国内性能较好的水性涂料基料树脂主要是醇酸树脂、环氧树脂、聚氨酯树脂、丙烯酸树脂及它们的改性树脂品种等。
This paper has described the raw materials and their functions for preparation of polyurethane-acrylate dispersion (PUA) and the typical preparation technology of the dispersion.
介绍了制备聚氨酯-丙烯酸酯(PUA)分散体用的原料及其作用，以及典型的制备工艺及其特点。
The title aqueous acrylate modified polyurethane dispersion has been prepared with acrylate and aqueous polyurethane prepolymer that is blocked with hydroxyethyl methacrylate.
用甲基丙烯酸羟乙酯封端的水性聚氨酯预聚体与丙烯酸酯发生聚合，制备丙烯酸酯改性水性聚氨酯分散体。
The emulsification mechanism of polyurethane-acrylate and its influence on stability of epoxy-acrylate aqueous dispersion and film properties are discussed.
讨论了聚氨酯-丙烯酸酯的乳化机理，及其对环氧-丙烯酸酯水分散体系稳定性及涂膜性能的影响。
The methyl acrylate emulsion was prepared in the anionic polyurethane emulsion.
研究了在阴离子水分散性聚氨酯中丙烯酸甲酯乳液聚合的行为。
A composite film with water-resistance was prepared by curing polyurethane-acrylate on regenerated cellulose film (from bagasse pulp) under UV-irradiation.
再生纤维素膜(甘蔗渣浆制)表面直接用紫外光固化聚氨酯-丙烯酸酯制备出防水性复合膜。
The film structure of the aqueous acrylate modified polyurethane is characterized by use of infrared spectrum and SEM; the thermal stability of the film is investigated by use of thermal analyzer.
同时用红外光谱和扫描电镜讨论了丙烯酸酯改性聚氨酯成膜物的结构特征，用热分析仪分析了膜的热稳定性能。
The acrylate-modified waterborne polyurethane dispersion was prepared through reaction of acrylate and polyurethane prepolymer with reactive groups.
本文利用丙烯酸酯与带有活性官能团的聚氨酯预聚体反应，生成了水分散的丙烯酸酯改性聚氨酯分散体。
The modification of waterborne polyurethane through chain extending, crosslinking and compounding with acrylate was studied. The aqueous polyurethane wood paint was also prepared.
研究了水性聚氨酯的扩链、交联、丙烯酸酯复合等改性方法以及水性聚氨酯木器漆的研制。
The modification of waterborne polyurethane through chain extending, crosslinking and compounding with acrylate was studied. The aqueous polyurethane wood paint was also prepared.
研究了水性聚氨酯的扩链、交联、丙烯酸酯复合等改性方法以及水性聚氨酯木器漆的研制。
应用推荐