Our products are made of advanced materials and with new technologies, such as: polymer content, shielding and shock absorption.
此产品以高分子并容，屏蔽，吸震等科技工艺制造，音质兼具木质材料的温暖，厚实；
The effect of composition of copolymer, polymer content of casting solution, additives et al on the performance of membrane were discussed.
讨论了共聚物组成、制膜液中聚合物含量、添加剂等与膜平均孔径的关系；
The results indicated that the influences of heating rate and polymer content on phase separation and voltage response are remarkably observed.
研究结果表明，升温速度和聚合物含量对PD L C膜的相分离结构和响应电压有显著的影响。
The expression "copolymers" covers all polymers in which no single monomer unit contributes 95% or more by weight to the total polymer content.
所称“共聚物”，包括在整个聚合物中按重量计没有一种单体单元的含量在 95%及以上的各种聚合物。
Polymer content of the microspheres products can be lifted by over 10wt % via twice polymerization process; meanwhile, the amount of emulsifiers can be reduced by about 5wt %.
两次聚合工艺可将微球体系中聚丙烯酰胺含量提高10%以上，将乳化剂用量降低5%左右。
In the Polymer Process speciality, the teach of High Polymer physics include some content of the physics area.
在材料加工专业中的高分子物理教学，涉及到物理学科领域的一些内容。
The products have distinct quality advantages in stability, content, clarifying degree, color grade, crystallization, specific volume, polymer, unity, etc.
产品在稳定性、含量、澄清度、色级、结晶性、比容、聚合物、均一性等方面具有鲜明的质量优势。
High-solid content polymer additive system; composition, method and its product.
高固含量聚合物添加剂体系∶组合物，方法，和其产品。
Effects of the polymer molecular structure, the silver powder content, morphologies, particle size and solvent kinds on conductivity were studies.
通过实验研究了聚合物分子结构，银粉的含量、形貌、粒径，溶剂种类对导电性能的影响。
Starting from the relation between structure and properties of polymer, high molecular polysiloxanes containing of different content of aminopropyl groups were designed and synthesized.
从聚合物结构与性能关系入手，设计合成了高分子量的不同氨丙基含量的含氨丙基聚硅氧烷。
The effect of the size, surface area and porosity of particles, the property and content of drugs, as well as the properties of polymer on the drug release behavior of microcapsules are elucidated.
阐述了高分子包囊的粒径、表面积、孔度、药物性能和药含量，以及高分子包囊材料的性能对药物释放行为的影响。
Radical chain polymerization is an important content to study the course of "polymer Chemistry".
自由基聚合是《高分子化学》学习的重要内容。
It was found that polymer with higher hydrophobic group content had stronger recovery after deformation in three kinds of polymers with the same shear viscosity.
实验发现在相同剪切粘度下的三种聚合物，形变恢复能力随着疏水基含量的增大而增大。
An epoxy resin, an organic secondary amine, a polyamide and a blocked isocyanate are selected as main materials to synthesize polymer resin with solid content of 70%.
本实验采用环氧树脂、有机仲胺、聚酰胺和封闭异氰酸酯为主要原料，合成了固体分在70%的阳离子型环氧聚合物树脂；
However, if the polymer is pliable and has enough adhesion to filler, the conductivity and impact strength may be increased simultaneous-ly within certain content of filler.
若基体本身比较柔软且对填料有足够的亲和力，则在一定的填料含量范围内，导电性和冲击强度可同时提高。
The influence of polymer concentration, the type of additive and content of additive on the morphological structure has been surveyed by SEM.
用电子显微镜（SEM）考察了聚合物浓度、添加剂用量及种类对膜形态结构的影响。
Communicative polymer is a sentence transformation that keeps the content unchanged in a prime model sentence.
转换聚合体则是保留原始模型句内容不变的句子转换。
It was found that the hyperbranched polymer improved the dyeing property of PP with dye-uptake up to 70% when the content of hyperbranched polymer was 8%.
实验结果表明：超支化聚合物的加入改善了PP的染色性，当超支化聚合物的质量分数为8%时，PP的上染率达到70%。
The effects of the dispersing medium, the agitation intensity, the amount and properties of magnetic particles on the polymerization and magnetic content in the polymer microspheres are discussed.
讨论了分散介质、搅拌强度、磁性粒子性质及用量等因素对聚合反应及聚合物磁含量的影响。
It shows that the content of head-to-tail chain of the polymer are related to its polymerization temperature, but are not related with the kind of initiators used.
实验表明聚合物的头-头链的含量与聚合温度有关，而与引发剂的种类无关。
The water-soluble polymers with a low content of hydrophobic groups in the main chains are called hydrophobic associative water-soluble polymer.
疏水缔合水溶性聚合物是指在聚合物亲水性大分子链上带有少量疏水基团的一类水溶性聚合物。
A method for preparing polymer microspheres with high magnetic content is introduced.
提出一种制备高磁含量聚合物的方法。
Glutenin Macropolymer (GMP) is one of the most important components of glutenin polymer. The size distribution of glutenin polymer can be expressed by the content of GMP.
谷蛋白大聚合体(GMP)是谷蛋白聚合体的重要组成部分，其含量反映了谷蛋白聚合体的粒度分布状况。
A strong dependence of water soluble polymer (WSP) formation on DMAEMA concentration was found by analyzing the amount and content of water soluble polymer.
分析粒子形成过程中产生的水溶性聚合物的量和组成，可以看出DMAEMA用量增加水溶性聚合物增多。
High performance mineral polymer can be prepared while the content of sodium silicate in the alkaline liquid and the standard sand in the solid materials are both kept around 70%.
硅酸钠水玻璃在液相中的比例约为70%，且标准砂占固相的比例为70%左右时，可制得力学性能良好的矿物聚合材料。
The mechanical properties of polymer effected by moisture factor was researched by experiment. A series of experiments on Nylon6 for different moisture content was made.
本文从实验的角度对湿度因素影响下的高分子聚合物材料的力学性能进行了研究，选用了尼龙6材料进行了一系列的有关湿度实验。
Results The rheological property of the high filler content material is influenced by the sort and quantity of the rheological modifier and the polymer ingredient.
结果流变改性剂的种类和用量、树脂的配比都影响高填充量填充材料的流变性。
During the preparation, high energy ray is used to radiate the polymer, and radiation dosage and conducting stuffing content are altered to control the shrinking rate and shrinking force effectively.
本发明在制备过程中还使用高能射线对聚合物进行辐射处理，并通过改变辐照剂量和导电填料含量，有效地控制收缩速率和收缩力。
During the preparation, high energy ray is used to radiate the polymer, and radiation dosage and conducting stuffing content are altered to control the shrinking rate and shrinking force effectively.
本发明在制备过程中还使用高能射线对聚合物进行辐射处理，并通过改变辐照剂量和导电填料含量，有效地控制收缩速率和收缩力。
应用推荐