Ultrasonic attenuation can characterize the miscibility and phase morphologies of polymer blends.
超声衰减可表征聚合物共混物的相容性和相形态结构。
A brief overview of surface active stabilization and stabilization of polymer blends is presented.
对于表面活性稳定性和聚合物混合物的稳定性的作了简要概述。
The negative conveying screw element has a marked effect on the morphology changes of polymer blends.
及向螺纹元件对共混物相态变化影响显著。
Reactive compatibilization, its mechanism and morphology control factors in polymer blends were briefly reviewed.
综述了聚合物共混物的反应性增容及相形态控制的研究现状。
With the increase of the matrix resin and water infiltration, the resin matrix and the hydrophilic polymer blends.
同了提高基体树脂与水的浸润性，可以将树脂基体与亲水高聚物进行共混。
For a long time, the characteristic parameters of the dispersed phrase of polymer blends are measured by manual work.
长期以来，聚合物混合物分散相的特征参数都是采用人工测量的方法。
The on-line analysis on morphology has been completed for immiscible polymer blends during mixing and melting process.
用光散射在线采集与分析方法完成了熔融混炼过程中非相容高分子共混物的形态结构分析。
Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions.
聚合物混合体应按单体单元比例相等、 种类相同的聚合物归入相应子目。
The phase separation processes under external stress field of polymer blends with modulus inhomogeneity were also investigated.
此外，本文还分析了具模量反差的聚合物共混体系在外力场作用下的相分离过程。
Miscibility and Crystallization Behaviour of Biodegradable Polymer Blends , Beijing University of Chemical technology , Zhaobin Qiu.
生物降解聚合物共混物相容性和结晶行为的研究，北京化工大学，邱兆斌。
Emphasis is put on the studies using polymer blends as the matrix to lower the carbon black loading through the heterogeneous dist...
重点介绍了使用共混聚合物作基体，并利用炭黑在共混基体中的非均相分布来降低炭黑用量的研究。
The double yielding was also found in some polymer blends with specific phase morphology, and the corresponding mechanism was suggested.
同时，发现在具有特殊相形态结构的聚合物及聚合物共混物中有二次屈服现象，并提出了相应的机理。
The concept of the model of energy ratio, which is an effective method to study phase morphology of immiscible polymer blends, was put forward.
指出了目前不相容聚合物共混体系相态反转数学模型的不足，提出了能量比模型的概念，认为这是研究不相容聚合物共混体系相态有效的方法。
A laser scattering measurement system based on different ability of polarization and scatter for different polymer blends, is described in this paper.
基于各种高分子共混体系具有不同的偏光和散射性质，研制成一种激光散射分析系统。
So, it is of significance to analyze its performance that measuring and studying the characteristic parameters of the dispersed phrase of polymer blends.
因此，提取并研究聚合物混合物材料分散相的特征参数对于分析其性能有着重要的意义。
The performances of practical multiphase materials made from immiscible polymer blends are usually determined by the microscopic phase structures of blends.
不相容聚合物共混物形成的相结构决定着共混材料的各项性能。
In recent years, because of the extensive application of polymer blends filled with particles, the research of the structure of polymer composites is important.
近年来，由于粒子填充聚合物共混物的广泛运用，复合材料的结构研究具有重要意义。
Then the actuality and application of molecular simulation study of polymer blends were generally described. Finally, molecular modeling trends were also prospected.
概括叙述了用分子模拟方法研究聚合物共混相容性的现状及应用，对分子模拟发展趋势作了展望。
Therefore, the apparent shear viscosity of immiscible polymer blends may be lower than the apparent shear viscosity of any phase under otherwise identical conditions.
这样，在相同条件下，混合物的表观剪切粘度可能低于任何单一相的表观剪切粘度。
The calculation results show that the vibration force field play an effective role in controlling phase morphology of immiscible polymer blends during polymer processing.
计算结果表明，聚合物加工过程中引入振动力场为共混体系相形态控制提供了更为有效手段。
The results of SALS and SEM are identical, which indicate that the SALS online analysis method may be suitable for the study of the polymer blends morphology during the blending process.
小角激光光散射在线分析结果与在线取样的扫描电镜分析结果吻合的很好，说明用小角激光光散射在线采集分析系统来研究共混过程中的相形态变化是准确的、可行的。
In this paper numerical simulation was used on investigating the matrix yielding initiation and expansion of polymer blends which has a continuous single phase and a regular particles shape.
进行了分散相颗粒形状较规则的单相连续两相共混物细观结构参量对共混物基体屈服的产生和屈服区扩展规律影响的研究。
The paper represents the situation of internal friction researches for polymer blends and composites, and analyses specially the correlation between internal friction behavior and microstructure.
描述了聚合物共混物及纤维增强聚合物基复合体系的内耗研究现状，并着重分析了内耗行为与微观结构的相关性。
This paper introduced the application of starch in plastic and rubber as well as other polymer blends. The recent research development of starch used in polymer material in the world is reviewed.
本文介绍了淀粉在塑料、橡胶以及其它高聚物共混物中的应用，综述了国内外有关淀粉应用于高分子材料的最新研究进展。
The yellow index of blends at different mixing time and thermal aging time increased obviously than that of pure polymer.
在不同混炼时间及热老化时间下，共混物的黄度指数相对纯聚合物有明显提高。
Polymer nanocomposites are formed from blends of nanometer sized fillers with either thermoset or thermoplastic polymers.
纳米复合材料是用纳米尺度的填料与热固性或者热塑性聚合物掺混而形成的。
The composite film is formed by coating perpendicularly-aligned carbon nanotubes with a polymer selected from poly (vinyl acetate), poly (isoprene), or blends thereof.
通过用选自聚乙酸乙烯酯、聚异戊二烯、或其共混物中的聚合物涂布垂直定向碳纳米管，从而形成复合材料膜。
The composite film is formed by coating perpendicularly-aligned carbon nanotubes with a polymer selected from poly (vinyl acetate), poly (isoprene), or blends thereof.
通过用选自聚乙酸乙烯酯、聚异戊二烯、或其共混物中的聚合物涂布垂直定向碳纳米管，从而形成复合材料膜。
应用推荐