Polyester film, inductive, epoxy resin coating.
聚乙酯膜，有感结构，环氧树脂包封。
This capacitor adopt polyester film as dielectric.
该电容器采用聚酯薄膜作介质。
The quality of film selection of optical grade polyester film.
而优质膜选用光学级聚酯膜。
At present there is increasing demand for special polyester film in domestic market.
目前国内特种聚酯薄膜市场的需求在不断增长，国际市场前景更加广阔。
Many groups around the copper wire by a layer of heat-resistant polyester film wrapped insulation.
多组铜丝的周围被一层耐热聚酯薄膜绝缘包裹。
Polyester film modified with NG had a shrinkability of more than 35% after the treatment in hot air.
经（NG）改性的聚酯薄膜在热空气中的热收缩率超过35 % ；
It was indicated that the corona discharge treatment was necessary in some applied field of polyester film.
讨论了聚酯薄膜电晕处理及其应用的关系，指出在一些应用范围电晕处理的必要性。
Like most advanced racing sails, they are a sandwich of polyester film sheets with a filling of carbon fibers providing strength.
像多数的高级比赛用帆一样，船帆由双层聚酯纤维膜组成，内部填充碳纤维以增加强度。
Process of copper autocatalytic plating on ABS plastic, polyvinyl chloride, polyester film have been studied in this investigation.
本文研究了ABS塑料、聚氯乙烯、聚酯薄膜的自催化镀铜工艺。
Technical requirements and method of flame retardation test in industriial standard of type CL81 highvoltage polyester film capacitors are described.
介绍了CL81型高压聚酯膜电容器行业标准中关于阻燃试验的技术要求和试验方法。
This paper introduces some companies in Japan the ways on improving ZMarresistance of the polyester film and producing the high - level polyester film.
介绍了日本几家公司提高薄膜耐划擦性，生产高档聚酯薄膜的方法。
The heat seal connector is made of coating layer that is consisted in conductive particulate dispersed in hot-melt adhesive on printed circuit polyester film.
热压密封连接器是在聚酯膜上印刷导电线路后，涂覆一层分散有导电微粒并具有热熔性的胶粘层而组成。
This paper introduces the principle, structure of automatic control system for BOPET - (polyester film) production line, and the retrofit for this control system.
介绍了BOPET聚酯薄膜生产线的控制系统原理，系统结构，以及对控制系统的改造。
The laminated, chemically resistant, self-adhesive code strip is manufactured from silicone-free polyester film and stored on reels in lengths of up to 100 meters.
经过层压，抗化学腐蚀的不干胶码带是由有机硅无聚酯薄膜制造而成，以长达100米的卷轴方式存放。
Polyester film feeling construction, inductive, epoxy resin coating. Small size and light weight. Small dissipation factor, the leads directly welded to electrodes.
聚酯膜有感结构，环氧树脂包封，体积小，重量轻，引线直接焊于电极，损耗小。
ZFM series automatic film laminating machine adopts pre-coating polyester film as laminating materials, film lamination can raise the brightness of paper and protect it.
ZF M系列自动复膜机，以预涂聚脂薄膜为复膜材料，对纸品表面复膜增加纸品表面的的亮度，并起到保护印刷品表面作用。
Conductive core line outside a thermally insulated with polyester film around the package, with the outer layer made of rubber insulation and jacket as a protective layer.
导电线芯外面采用耐热聚酯薄膜绝缘带绕包，最外层用橡皮制成的绝缘兼护套做为保护层。
This polyester film not only the price is more expensive, and feels solid, smooth, compact structure, high strength, and high safety, excellent explosion-proof performance.
这种聚酯膜不只价格较贵，并且摸上去扎实、滑润，构造细密，强度高，因此安全性高、防爆性能超卓。
Flame retarding mechanism, influence factors of anti-flammability and application of epoxy encapsulating materials for polyester film capacitor were described in this paper.
本文简介了环氧阻燃包封料的阻燃机理以及影响其阻燃效果的各种因素，最终确定其配方及制备工艺，并对其应用做了评估。
Conductive wire core outside the use of heat-resistant polyester film insulation tape wrapped around, the outermost layer made of rubber insulation and sheath as protective layer.
导电线芯外面采用耐热聚酯薄膜绝缘带绕包，最外层用橡皮制成的绝缘兼护套做为保护层。
Conductive line outside the core using heat-resistant polyester film with insulation around the package, the outermost layer of rubber insulation and sheath made of as a protective coating.
导电线芯外面采用耐热聚酯薄膜绝缘带绕包，最外层用橡皮制成的绝缘兼护套做为保护层。
Adopted antistatic processing of polyester film is made as base material, it has prevent dirt and impurities adsorption and prevent electrostatic damage function of surface protective materials.
采用防静电处理的聚酯薄膜作为基材，具有防止灰尘和杂质吸附以及防止静电损伤功能的表面保护材料。
Medium for polyester, polypropylene, polyphenylene sulfide film and so on.
介质为聚酯、聚丙烯、聚苯硫醚薄膜等。
Composition: 90% faux neoprene, 4% PVC film, 6% polyester binding.
成分：90%人造氯丁橡胶，4%聚氯乙烯薄膜，6%涤纶装订。
The influencing factors and efficiency are studied when the process of attached anoxic-oxic biological film process is applied to the treatment of polyester wastewater.
研究了附着缺氧-生物膜工艺处理聚酯废水的影响因素及效率。
In this article are researched the properties of polyester size SL-996 and the sizing liquid and film of its mixed size with a yarn sizing effect comparison followed.
研究了SL- 996聚酯浆料及其混合浆料浆液、浆膜的性能，并对浆纱效果进行了比较。
The product is two layers of limpness composite material of polyester thin film coated with bonding agent and single surface bonding of calendaring aromatic polyamide fiber paper.
该产品是由聚酯薄膜涂以胶粘剂，单面粘合轧光聚芳酰胺纤维纸而成的二层柔软复合材料。
The product is two layers of limpness composite material of polyester thin film coated with bonding agent and single surface bonding of calendaring aromatic polyamide fiber paper.
该产品是由聚酯薄膜涂以胶粘剂，单面粘合轧光聚芳酰胺纤维纸而成的二层柔软复合材料。
应用推荐