Poly(ethylene oxide)(PEO) hydrogel films formed by electron beam (EB) irradiation were prepared as wound dressing. The physiochemical properties of the PEO hydrogel films were evaluated.
研究应用电子束照射聚氧化乙烯（PEO）所形成的水凝胶膜的制备，并对这些可作为伤口敷料的水凝胶膜的理化特性进行了评价。
The feasibility of in-situ microfibrillar method on recycling poly(ethylene terephthalate)(PET) and high-density polyethylene(HDPE) mixtures was carried out by four repetitive extrusion.
研究了原位微纤化方法在回收聚对苯二甲酸乙二醇酯（PET）和高密度聚乙烯（HDPE）混合物方面的应用。
The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of poly (ethylene glycol) methyl ether methacrylate (PEGMA).
紧接着，表面引发甲基丙烯酸聚乙二醇酯(PEGMA)原子转移自由基聚合制备梳型聚合物刷。
The results showed that poly( ethylene glycol) as a phase transfer catalyst can raise the conversion.
指出聚乙二醇作为相转移催化剂可增加转化率。
We introduce poly (ethylene glycol) (PEG) as a second component to modify PHB. The incorporation of PEG into a PHB matrix can improve the hydrophilicity, flexibility and degradation rate.
本研究引入了第二组分-聚乙二醇对其进行改性。peg作为材料的一部分，可以弥补PHB在亲水性、降解性等方面的不足。
The synthesis of poly(ethylene oxide)(PEO) montmorillonite composite by direct melt intercalation of polymer powders in layered silicates is studied by using XRD, IR, DSC and SEM, etc.
用XRD、IR、DSC和SEM等分析方法研究了聚合物粉末直接熔融嵌入合成聚氧乙烯（PEO）-蒙脱石夹层复合材料的过程。
The coating film contained a biocompatible semipermeable material, cellulose acetate, and a water soluble pore-forming agent, poly(ethylene glycol).
膜衣成分包含具有生物相容性材料-醋酸纤维素与水溶性孔洞形成剂-聚乙二醇。
The thermal poly-condensation and carbonization test of flashing oil as feedstock and ethylene residual oil as additive was conducted in the laboratory.
采用煤沥青闪蒸油为原料，乙烯残油为添加剂，在实验室内进行热缩聚及炭化实验。
A stable amorphous calcium phosphate (ACP) was prepared by a wet chemical method at a low temperature in the presence of poly(ethylene glycol) (PEG).
采用聚乙二醇（PEG）先与钙反应后，再与磷源溶液反应，在低温环境中制得无定形磷酸钙。
In this study, the surfaces of polyurethane films were modified by poly (ethylene glycol) (PEG) and PEG-derivatives, and blood compatibility of resulting surfaces was investigated.
本论文是通过化学接枝的方法，用聚乙二醇及其衍生物对聚氨酯表面进行修饰，研究改性前后聚氨酯表面的血液相容性。
One kind of hydroxyl - terminated aliphatic polycarbonate, i. e. poly(ethylene ether carbonate) diol(PEECD) was synthesized and used to toughen epoxy resin (EP) .
合成了以羟基封端的脂肪族聚碳酸酯-聚乙基醚碳酸酯二醇（PEECD），并用于环氧（EP）树脂的增韧。
The synthesis and the crystallization of poly (ethylene terephthalate) (PET) with the novel coordination complex catalysts were investigated.
采用新型络合催化剂，对聚对苯二甲酸乙二酯(PET)的合成和结晶行为进行了研究。
Recently, poly (d, l-lactide) -poly (ethylene glycol) (PLA-PEG) block copolymers have been widely applied owing to the favorable biodegradability and biocompatibility.
聚乳酸-聚乙二醇嵌段共聚物因具备良好的生物可降解性和相容性而得到广泛应用。
Poly (propylene oxide-ethylene oxide) containing ether linkage was used to make complexes with stannic oxide sol, thus producing a kind of anti-static agent for nylon resins.
通过以含醚键的聚(氧化丙烯-氧化乙烯)为主体，与二氧化锡溶胶复合，制备了一类可用于尼龙的抗静电剂。
MOR zeolite was dispersed into poly(ethylene glycol)oligomer to form a stable gel. Its Electrochemical behavior was first detected by a cyclic voltammeter.
丝光沸石被分散到乙二醇低聚物中形成稳定的胶体。它的电化学行为首次被用循环伏安法研究。
A study was conducted to synthesize oligoester alcohols from poly (ethylene terephthalate) production wastes via transesterification with diethylene glycol and tribasic alcohol.
将涤纶废产物用二甘醇和三元醇经酯基转移合成齐聚酯多元醇，并用其制备聚氨酯硬质泡沫塑料。
Polyaniline films were prepared on poly (ethylene terephthalate) (PET) fibers by a modified in-situ chemical polymerization.
采用改进的原位化学聚合法在涤纶纤维表面直接氧化生成聚苯胺薄膜。
Study on special compound for automobile bumper was made by means of blending. Small bulk PP was modified with co-polypropylene, poly (octene-ethylene) (POE) and other additives.
以小本体聚丙烯(PP)为基料，通过与共聚pp、聚烯烃弹性体(POE)及其它助剂共混改性，制得汽车保险杠专用料。
Conductive Poly (ethylene terephthalate) (PET) fabrics were prepared by electroless copper and nickel plating.
采用化学镀的方法制备镀铜和镍导电涤纶织物。
Poly (ethylene terephthalate) (PET) is widely used in the fields of the fiber, film and engineering plastics because of its excellent rigid, heat and chemical resistance properties.
聚对苯二甲酸乙二醇酯(PET)具有高的刚性、耐热性和耐化学药品性等优良性能，被广泛应用于纤维、薄膜和工程塑料等领域。
Poly (ethylene terephthalate) (PET) is widely used in the fields of the fiber, film and engineering plastics because of its excellent rigid, heat and chemical resistance properties.
聚对苯二甲酸乙二醇酯(PET)具有高的刚性、耐热性和耐化学药品性等优良性能，被广泛应用于纤维、薄膜和工程塑料等领域。
应用推荐