Application of OMRON CPM1A series PLC in solar water heater automatic control system is mainly introduced, emphasises on the system hardware constitution and the system software design process.
主要介绍了OMRON公司的CPM1A系列在太阳能热水器自动控制系统中的应用，重点阐述了系统的硬件构成及系统软件的设计过程。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
介绍了PLC在舞台吊杆控制系统中的应用，以及PLC控制系统的硬件和软件的设计方法。
This paper presents application of PLC in a plate shearing machine control, and expounds the design the hardware and software of the system in detail.
介绍了可编程控制器(PL C)在自动剪板机控制中的应用，对系统的硬件和软件设计作了较为详细的阐述。
We often deal with the matter of setting software code in operating board of electric - mechanical integrated equipment controlled by PLC.
在用PLC控制的机电设备中，常遇到操作面板上增加软件密锁的问题。
In this paper, the control principle of VVVF Providing-water system is introduced, mainly introduces structural properties of PLC control system, and the design method of hardware and software.
本文介绍了变频调速供水系统的原理，重点介绍了PLC控制系统的结构特点及系统硬件和软件设计方法。
At present, remote PLC Virtual control system based on industry configuration software still has not concrete application in teaching.
目前基于工业组态软件的远程PLC虚拟控制系统在教学上尚无具体的应用。
In rotation tools set of CNC, to select tool by PLC software can realize tool exchange at random and high speed.
对数控机床中的旋转刀库，采用PLC软件选刀，可实现随机快速换刀。
It described the application of switches, links, combinational state software and PLC used for power supervising system in Xiaoshan power station of Songjianghe power plant.
介绍了松江河电厂小山电站的开关、刀闸运行监控要求和组态软件及PLC在电力监控系统的应用。
Using the PLC module made by Simons as a control core, S7-200 made by Simons is designed in remote gate control system, the draft of its composing and its system software program are put forward.
利用西门子公司的PLC模块作为控制核心，对西门子S7-200在远程闸门控制系统中的应用进行了设计。给出了闸门控制系统硬件构成和系统软件编程框图。
This paper mainly introduces the software and hardware configuration of PLC computer control system with the Siemens company series S7-400 and its application in the Nanhai garbage power station.
本文主要介绍了西门子公司S7- 400系列PLC在南海垃圾电厂计算机控制系统的软件，硬件配置及其成功运用。
The application of PLC in cut tobacco drying process is presented. The hardware configuration and software design of the system are focused. The operation shows excellent result.
介绍PLC控制在烟丝烘干过程中的应用，较详细地叙述了系统的硬件配置和软件设计。投入运行结果表明效果良好。
This paper discusses the hardware configuration and the PLC software design in the electrical control system of a piston ring profile lathing and milling combined machine tool.
本文对活塞环仿形车、铣组合机床电气控制系统中硬件配置及PLC的软件设计特点进行了探讨。
The application of PLC in cut tobacco drying process is presented. The hardware configuration and software design of the system are focused.
介绍PLC控制在烟丝烘干过程中的应用，较详细地叙述了系统的硬件配置和软件设计。
It recommends the application of PLC and frequency converter in Circular Saw feeding control system, analyzes the system control scheme and the structure design of software.
介绍PLC和变频器在圆锯变频进给控制系统中的应用，并分析系统控制方案及软件结构设计。
PLC control scheme of cation exchanger, which has application in the desalted water process, is presented in this paper. The design of software and hardware is also described.
从工程角度介绍可编程控制器(PLC)用于脱盐水处理中阳离子交换器的控制方案，并给出了有关硬件及软件的设计要点。
This paper introduces the application study of touching screen and PLC in control system of the pulsant vacuum sterilizer. It mainly discusses the hardware configuration and software design.
介绍触摸屏和PLC在脉动真空灭菌器控制系统中的应用研究。重点介绍了控制系统的硬件配置以及软件设计。
In addition, this paper chooses VB to develop application software for PC, and designs interface of interpolation simulation, and compiles interface program of VB and MATLAB, as well as VB and PLC.
另外，选用VB进行PC机应用软件的开发，编制了插补仿真界面，编写了VB与MATLAB接口程序，以及VB与PLC通信的程序。
This paper introduced the application of PLC in the centralized station of providing cold, among which control principle, structure of network and software are discussed.
本文介绍了PLC在地铁集中供冷站监控系统中的应用，主要阐述监控系统的控制原理、网络结构及软件结构。
The paper expounds the use of OMRON'S PLC products in the glass shell production line, and discusses problems from hardware allocation to software design.
从硬件配置到软件设计两个方面进行了论述，介绍了OMRON的PLC产品在玻壳生产线上的应用。
The composition and principle of air leakage control system of rotary air preheater based on PLC and various functions of software developed in this air leakage control system are described.
叙述了基于PLC的回转式空预器漏风控制系统的组成、工作原理及软件的各项功能。
To guarantee the hoist safety running, several logic judgment and control methods are used in PLC software, besides hardware protection.
在硬件上除采用各种措施使系统能可靠工作外，在软件上也采用多种逻辑判断和控制的方法，以保证起升的安全。
In this article, the PLC control in the automatic grain storage control system and the correlation hardware electric circuit as well as the software design are mainly introduced.
主要介绍了PLC控制在全自动粮库控制系统应用及相关硬件电路、软件的设计。
The application of PLC and configure software in minitype automated storage system is introduced in this paper, citing the FX-2N series programmable controller.
以FX - 2n系列可编程控制器为例，介绍PLC及组态软件在小型自动货架中的应用。
In SCM control and PLC control, provide selection of hardware and designing of hardware circuit, for software design aspect present software designing's thought and correspondence procedure.
在单片机控制系统和PLC控制系统的设计中，硬件方面的设计给出了其硬件的选取和接口电路，软件设计方面给出了软件设计思路及单片机主要相应部分的程序。
GE-I Series PLC is used to simulate drum controller in this paper. Because of implement with software, it is easy to modify program, and its total steps, output points can be used in all conditions.
本文采用GE -I系列可编程控制器（PLC）的计数器来模拟鼓形控制器，由于用软件来实现，因此编程、修改灵活方便，而且总步数和输出点数可以满足所有场合的需要。
Therefore, uses the method which the PLC simulation software and the computer unify in solution curriculum project program debugging difficult problem, can receive the good effect.
因此，采用PLC仿真软件与计算机相结合的方法，解决课程设计中程序调试的难题，能收到较好的效果。
The application of PLC control system in the control system of thermo plastic flooding machine is introduced, the composition and its software design are also described.
介绍了P LC软件电动控制系统在热塑机设备控制系统中的应用，对系统的组成及软件程序设计作了阐述。
This paper mainly introduces the working principle of IPC based built in PLC and some of the design and developing methods of the key software.
本文主要介绍基于IPC的嵌入式可编程控制器工作原理和一些关键软件的设计与开发。
This paper presents a PLC software design method for position detecting in the elevator control.
介绍了可编程控制器(PLC)在电梯控制中位置检测的应用程序设计。
This paper presents a PLC software design method for position detecting in the elevator control.
介绍了可编程控制器(PLC)在电梯控制中位置检测的应用程序设计。
应用推荐