Research on Pore Sealing of Electroless Ni-P Plating Alloy Covered with Silane Film;
本研究采用包埋法制备涂层并进行封闭处理。
Proof, though, will come with use.Testing is already under way, with the nanocrystalline nickel-tungsten alloy being tried out as a plating on the bumpers of a fleet of trucks.
尽管样品将被使用，但测验仍在进行，一队卡车保险杠上的纳米结晶镍钨合金镀层仍在接受检验。
Proof, though, will come with use. Testing is already under way, with the nanocrystalline nickel-tungsten alloy being tried out as a plating on the bumpers of a fleet of trucks.
尽管样品将被使用，但测验仍在进行，一队卡车保险杠上的纳米结晶镍钨合金镀层仍在接受检验。
Therefore, amorphous alloy plating has aroused people's attention.
因此，电镀非晶态合金已引起人们的极大关注。
This text simply introduce the technology for Sn-Ce-Ni alloy electroplating. Plating solution is stable. Coat quality is good.
本文简要介绍锡铈镍合金电镀工艺。本工艺镀液稳定，电镀层质量好。
Hydrogen brittleness: because, in addition to the erosion oil or plating process such as metal and alloy hydrogen atom absorption and cause brittle.
氢脆：由于浸蚀，除油或电镀等过程中金属或合金吸收氢原子而引起的脆性。
The composition generally changes from alloy cathode target to alloy coating deposited by multi arc ion plating to some extent.
采用多弧离子镀制备的合金涂层成分与合金阴极靶之间通常存在一定程度的偏差。
Electroplating is to use the principle of electrolysis in some metal surface plating a thin layer of the other metal and alloy process.
电镀就是利用电解原理在某些金属表面上镀上一薄层其它金属或合金的过程。
Effects of conditions of electroless plating of Pb Sn alloy on the composition and thickness of the coating were studied.
研究了化学镀铅锡合金过程中各影响因素对镀层的组成和厚度的影响。
Cu and Pb ions in the alloy plating bath and composition of its deposits.
此法已被成功应用于测定锡-铜-铅合金电镀液及其镀层中的锡、铜和铅。
A new technology of tin-nickel alloy electroplating from a pyrophosphating bath was studied. The effect of some plating parameters on the tin-nickel alloy coating was discussed.
研究了从焦磷酸盐槽液中电镀锡镍合金的一种新工艺，讨论了一些电镀参数对锡镍合金镀层的影响。
Then, black Sn-Ni alloy plating and ti carbide ion plating, quite well received currently, are discussed.
其次是黑色镀层，探讨了目前较受欢迎的电镀黑色锡镍合金及离子镀碳化钛。
The achievements in alloy plating since 1960 is briefly summarized. Five main features of alloy plating and four types of equilibrium diagrams are illustrated.
本文总结了自1960年以来合金电镀方面的成就，详细论述了合金电镀的五大特点和四种类型的平衡状态图。
The paper provides several substrate plating technologies of zinc alloy cast piecework to substitute cyanide copper plating.
本文介绍了几种取代氰化镀铜的锌合金电镀打底工艺。
In addition, it introduces briefly the nitrogen and carbon co-penetration at low temperatures after the alloy plating for improving the wear-resisting and application results.
对电镀合金后进行低温氮碳共渗，提高渗层耐磨性能以及模具中的应用效果也作了扼要介绍。
Rinsing with tap water was popularly adopted between the procedures of strike copper plating and bright sulphate copper plating for copper alloy glasses.
铜合金眼镜架经预镀铜和光亮酸铜工艺处理，工序间普遍采用自来水水洗。
A new kind of non-cyanide alkaline strike copper plating process for zinc alloy die-castings was developed in order to solve the problems in traditional non-cyanide strike copper plating.
为解决传统的锌压铸件无氰预镀铜存在的一些问题，提出了一种新的锌合金压铸件无氰碱性预镀铜工艺。
Zinc and cobalt content in zinc cobalt alloy plating bath should be maintained in a suitable range so that corrosion resistant zinc cobalt alloy deposit can be obtained.
为获得耐蚀性良好的锌钴合金镀层，必须维持镀液中的锌钴含量在工艺范围内。
Five essential causes resulting the abnormal phenomena in alloy plating such as anomalous codeposition and induced codeposition are explained in detail.
总结了合金电镀中出现反常现象的五种主要原因，并详细介绍了异常共析和诱导共析这两种合金电析中的特异现象。
A simple technology applying A-1 additive to Ni-Mo alloy plating is introduced in this article.
介绍采用A - 1添加剂进行黑镍(镍钼合金)电镀的简便工艺。
Counter-flow spray technique for the treatment of the rinsing water containing pyrophosphates in Cu- Sn-Ni alloy plating is described.
电镀焦磷酸盐铜锡镍废水由“常流水”清洗方式改为反喷淋清洗方式。
The lead concentration in Pb-Sn alloy plating bath was determined by standard additional atomic ab-sorption spectrometry, and the optimal determination conditions were obtained.
采用标准加入原子吸收分光光度法测定铅锡合金锭液中铅的浓度，试验确定了最佳的测定条件。
Zinc and cobalt content in zinc cobalt alloy plating bath are determined by the combined method of titration with EDTA and spectrophotometry.
采用EDTA滴定和分光光度相结合的方法测定碱性锌钴合金镀液中的锌、钴含量。
Mg alloy; electroless plating; bond strength.
镁合金；化学镀；结合强度。
Rare earth improved electroless plating method was developed for simultaneously depositing Pd-Ag alloy film on ceramic support.
采用稀土改进的化学镀法在多孔陶瓷载体上共沉积钯-银合金膜。
Magnetic cobalt-boron alloy deposits were prepared by electroless plating.
采用化学镀制得钴硼磁性合金镀层。
The process for electroless nickel plating of AM60 magnesium alloy in a nickel sulfate bath, based on etching in acidic molybdate and activation in alkali molybdate, was studied.
采用酸性钼酸盐酸洗、碱性钼酸盐活化工艺，研究了AM60镁合金上硫酸镍溶液体系化学镀镍的方法。
The process for electroless nickel plating of AM60 magnesium alloy in a nickel sulfate bath, based on etching in acidic molybdate and activation in alkali molybdate, was studied.
采用酸性钼酸盐酸洗、碱性钼酸盐活化工艺，研究了AM60镁合金上硫酸镍溶液体系化学镀镍的方法。
应用推荐