Enhanced plate stiffness and anatomic support.
增强板的刚度和解剖支持。
RESULTS: The effect of fixation strength, stiffness, stability and ultimate compress strength by GCC is better than that of general compress plate (GCP).
结果：在固定强度、刚度、稳定性、承载能力等方面GCC组均明显优于普通加压钢板(gcp)组。
Stiffness and damping coefficients of force for film on mirror plate and moment of force for film on tilting pads are derived by making use of Taylor series expression of film pressure.
采用对油膜压力进行泰勒级数展开的方法，导出了油膜对镜板的作用力和油膜对可倾瓦的力矩的刚度阻尼系数。
The orthogoi al multilayer sandwich plate which provides considerable strength, stiffness and stability has been used in some important engineering structures, such as the composite material bridge.
正交各向异性多层夹芯层板具有较好的强度、刚度和稳定综合性能，已在一些重要承力结构（如复合材料桥）中应用。
A stiffness matrix of simple rectangular plate bending element with 12 parameters expressed in explicit form is derived.
推导了以显式表示的12个自由度的简单矩形板弯曲元素刚度矩阵。
Calculating methods of cracking moment, ultimate moment, stiffness of the beams strengthened by steel plate are offered according to the non-linear relationship between stress and strain of concrete.
根据混凝土的非线性本构关系，提出了粘钢加固梁的开裂弯矩、极限弯矩、刚度的计算方法，并将理论值与试验值进行对比分析。
According the stiffness of bearing plate, the deformation test of bearing plate method is divided into rigid bearing plate method and flexible bearing plate method.
承压板法变形试验根据承压板的刚度分为刚性承压板法和柔性承压板法，两种试验方法的适用范围在规程中均有相应的规定。
According to bending stiffness formula of the flat plate, the idea of equivalent inertia moment is proposed, which constitutes a new second main stiffness formula for corrugated plate.
依据平板抗弯刚度公式，提出等效惯性矩的思想，构造了波纹厚板新的第二主向刚度公式。
Honeycomb sandwich plate has many advantages such as low density, high strength ratio and high stiffness ratio.
蜂窝夹层板具有低密度、高比强度、高比刚度以及可设计性等优点，在航空航天领域里广泛应用。
The prestress of steel girder by high strength cover plate can raise stiffness and save steel, with simple configuration.
焊接高强钢盖板的预应力钢梁构造简单，刚度较大，节约钢材，是一种值得推广的结构型式。
In this paper, a method of strength and stiffness reliability analysis for bar plate structural systems, which can simulate the wing of the flyers, is presented.
本文提出了一种可模拟飞行器翼面等溥壁结构的强刚度可靠性分析方法。
This work deals with the strength and stiffness analysis of the middle plate of injection machine by using finite element method. A proposal for the improvement of structure is put forward.
采用有限元技术对注塑机中间面板的强度、刚度进行分析，通过分析结果，对该零件结构合理化提出建议。
Objective To study the effect of the number of screws on the bending stiffness and dynamic compression plate (DCP) strain in a transverse fracture model in vitro.
目的研究体外模拟横断骨折模型中螺钉数量对动力加压钢板(DCP)应变和弯曲刚度的影响。
The stiffness and strength of clutch driven plate assembly were experimentally and numerically studied, an improvement design on the stress concentration was given.
采用试验和有限元的方法研究了离合器从动盘结构的刚度和强度，并对应力集中的区域提出了改进方案。
This paper analysis the problem of thin plate bend with EFM (Elemenf Free Method), gives the EFM interpolation function, establishes the stiffness matrix.
采用无单元法分析了薄板弯曲问题。给出了无单元法插值函数，建立薄板弯曲的刚度矩阵。
In the paper, an approach linking dynamic measurement and BEM is proposed to identify the bound-ary rotating stiffness of a thin plate structure.
本文用动态测试与边界元法数值计算相结合的方法来识别薄板结构的边界支承的刚度参数。
Some documents show that the proposed method in calculating stiffness matrix is satisfied in solving the displacements and internal forces of plate by elastic theory.
有关资料表明采用这种地基模型计算地基刚度矩阵，所获板内力和位移结果能很好的符合弹性解答的基本规律。
Bolted end-plate connection is one of the main connection for the steel structures, which is with high resistance ability, large stiffness, and convenient for construction.
高强度螺栓端板连接是钢结构连接的主要方式之一，具有施工方便、承载力高、连接刚度大等特点。
The load transfer on dowels is modeled as vertical springs, whose stiffness depends on the dowel properties and the dowel-plate interaction.
荷载在传力杆中的传递由竖向弹簧模拟，其弹簧刚度取决于传力杆的特性以及杆与板间的相互作用。
The stiffness matrix of synthetic dual plate-spring interlayer element is deduced.
导出了双层板―性夹层的综合单元刚度矩阵。
After strengthening by the steel plate, the - beams gain the better bending stiffness, higher limit load-bearing and flaw of the beam can be controlled soundly.
经粘钢加固后的钢筋混凝土梁具有极限承载力高、抗弯刚度大的优点，裂缝开展也得到有效的控制。
The synthesized reload modulus was confirmed by resilience test, plate loading test, and large scale bearing test. The replacement foundation modulus was ensured by the method of equivalent-stiffness.
分别采用室内回弹试验、野外平板载荷试验和堆载试验，综合确定土体的再压缩模量；
A model to predict stiffness is then established based on the stiffness volume average method and on the laminated plate theory by assuming that differential yarns are straight.
然后建立模型预测刚度刚度体积平均方法和基于层压板理论假设，差别化纱线是直的。
YKK Series high voltage(6kV or 10kV) induction motors has the box-type construction, which was made up of steel plate welded with each other, lightweight and good stiffness.
YKK系列高压三相异步电动机造型采用钢板焊接成箱式结构，重量轻，刚度好；
The finite element model of steel plate shear wall with silts in frame is established and by which the effect of main silt parameters on its strength and stiffness is analyzed.
建立了带框架的开缝钢板剪力墙有限元模型，分析了主要开缝参数对其强度和弹性刚度等性能的影响。
The finite element model of steel plate shear wall with silts in frame is established and by which the effect of main silt parameters on its strength and stiffness is analyzed.
建立了带框架的开缝钢板剪力墙有限元模型，分析了主要开缝参数对其强度和弹性刚度等性能的影响。
应用推荐