Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
Boundary element method to calculate the free surface flow over the plate region of the hanged-plate two storied intake work is presented in this paper.
本研究利用边界元法求解了悬板分层式引水渠首的悬板区过流问题。
According to the elastic thin plate theory and vibration theory, a boundary element method (BEM) was used to analyze the frequency characteristics of a thin plate in lateral free vibration.
根据弹性薄板理论和振动理论，运用边界元法(BEM)分析了薄板弯曲自由振动的频率特性。
In the paper, the elastoplastic boundary element method (BEM) of the initial strain is worked at calculating parameters of flat rolling of plate and strip.
本文在计算板带轧制中的参数时应用了初始应力的弹塑性边界单元方法。
In this paper the kirchhoff plate bending problems have been solved by Boundary Element Method.
本文提出了一个用边界积分方程——边界元法解克希霍夫平板弯曲问题的协调方案。
The hybrid finite element method is a fine method for solving plate problems.
混杂元法是求解平板问题的良好方法。
Structural free vibration characterization and seismic response were calculated by means of beam-plate linear mathematical model of finite element method.
采用梁、板线性有限元数学模型计算了结构自振特性和地震响应。
The traditional boundary element method of outside domain singularity points for plate bending problems needs two boundary integral equations.
传统的平板弯曲边界元域外奇点法要求建立二个边界积分方程才能求解。
In this paper a new simple boundary element method for solving polygonal thick plate bending problems is proposed.
本文对多边形厚板弯曲问题，提出了一种新的简单的边界元解法。
By the super element method, the back analysis and controllable design of composite material laminated plate including complicated micro-structure were completed in the paper.
文中采用超级元方法，对具有复杂细观构造的纤维增强复杂材料层合板进行单参数反分析及可控性设计。
The dynamic characteristic of monolayer plate is analyzed by the finite element method, and relevant finite element computation program is compiled.
用有限元方法对单层板结构进行了动态特性分析，并编制了相应的有限元动力计算程序。
The result of the method of sandwich plate is proved to be in good agreement with the finite element model result.
把有限元模型和拟夹层板法两者的计算结果进行比较，二者吻合较好。
The rolling process of medium plate was analyzed with the explicit dynamic finite element method.
采用动态显式有限元法对中厚板轧制过程进行了分析。
The velocity at the free face of a thick steel plate impacted by an explosive plate is calculated by means of the two-dimension dynamic finite element analytical method.
在炸药爆炸驱动飞板碰撞厚钢板后，利用二维动态有限元数值分析方法对厚钢板自由面的速度进行了数值计算。
Element, method of attaching element to plate-like component, assembly and die button.
元件，该元件固定到一板状组件上的方法，组件总成及模扣。
A parallelogram oblique element model is developed in the Finite element Method of Lines (FEMOL) for the solutions of oblique plate bending problems.
导出斜型薄板单元模型并应用于有限元线法(FEMOL)求解平行四边形斜板的弯曲问题。
Elastic thin plate in small yield was firstly calculated by using cellular element method.
首先应用该方法分析弹性薄板的小挠度弯曲问题。
The umbrella - shaped folded plate structure has been analyzed by finite element method.
通过有限元方法对伞状折板结构进行了分析。
In this paper, a new quadrilateral thin-thick plate bending element with only 12 degrees of freedom, TACQ, is developed by using the area coordinate method.
本文采用四边形面积坐标，利用假设剪切应变场方法和广义协调理论构造出一个具有12个自由度的四边形厚薄板通用弯曲单元TACQ。
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律；
Solving the thin plates on Winkler's foundation by the nonsingular boundary element method and the layerwise summation method, the deflection of the given point of the plate can be obtained.
本文以无奇点边界元法分析地基厚板，而用分层总和法计算地基沉降，并将两者联系起来，即利用边界元法解出的厚板下的地基反力作为分层总和法的外力，从而求出地基的沉降。
With the finite element method, the main factors that affecting the cooling contraction of the bent steel plate of medium thickness are simulated.
运用有限元工具，对影响中厚钢板热弯曲成形中冷却收缩的主要因素进行了有限元数值模拟。
According to Finite Element Method, the impactor is considered as a discrete mass system in terms of 3D solid element with initial velocity, and 2D shell element is used for target plate.
首先采用有限元法，将撞击体离散成由三维实体单元构成的具有一定初始速度的离散质量系统，对靶板采用二维壳单元离散。
Based on the full scale experiment of an engineering project, the finite element method was applied to analyze the bonded-prestressed plate-beam system.
结合某实际工程的现场实验，通过建立精细有限元模型对现浇预应力空心板梁楼盖体系进行了分析。
In design of building structures the bottom plate on elastic foundation is calculated in common using finite element method or calculation charts.
在建筑结构设计中弹性支承板的计算一般采用有限元法和图表法。
To accurately calculate the stress on the bottom plate of large oil storage tank, a new finite element modelling method was proposed.
为了准确计算大型原油储罐的底板应力，提出了一种有限元分析的建模方法。
In this paper, vibration characteristics of plate sound source driven by transducer commonly used in ultrasonic cleaning are analyzed with the finite element method.
为了解超声清洗等应用中常用超声换能器激励的板声源的振动特性，使用有限元方法对其进行了研究，并通过实验验证了仿真结果。
In this paper, facing the convergent problem of plastic forming using large incremental step, we deduced the iterative formula used in analysis of elastic-plastic plate forming finite element method.
此文针对塑性成形有限元分析大增量加载的收敛性困难，推导了用于板料成形弹塑性有限元分析的牛顿一致迭代公式。
The wave finite element method was used to study the dynamic response under impact loading in a gradient non-homogeneous plate with a crack.
为了研究梯度非均匀有限板中裂纹动态响应问题，用波动有限元的方法研究了梯度非均匀板中裂纹在冲击载荷作用下的动态响应。
Using the finite element dynamic optimization method, a stiffer installing plate was designed, and another fixing bracket with better dynamic characteristics was developed.
把安装支架作为减振系统的一部分，应用有限元动态优化法设计出刚性增强的安装板和动态结构性能良好的安装支架来改善减振效果。
应用推荐