However, most of those sectors, such as automobiles and plastics, were considered less sensitive than the technology industry.
然而，如汽车和塑料之类的大部分科技区都不及科技产业易受影响。
The work, by Landis and others and published in Environmental Science &Technology, traces the full impact of plastic production all the way back to its source for several types of plastics.
Landis和其他作者的这一工作发表在了《环境科学与技术》上，他们详细追踪了几种类型的塑料从其生产源头到最终成品的过程中所造成的全面影响。
Cereplast, which has 25 employees in California and Indiana, has accumulated a series of patents for the technology it USES to create the bio-plastics.
Cereplast公司在加利福尼亚和印第安纳拥有25名员工，已经积累了用于生产生物塑料的一系列技术的专利。
The almost unbelievable reality, says a new charity Science and Technology against ocean Plastics (STOP), is that large areas of our oceans now contain more plastic than plankton.
一个新的慈善机构抵制海洋塑料科技(缩写STOP)称，几乎令人难以置信的事实是，我们的大面积海洋所含有的塑料比浮游生物还要多。
Processing technology of WPC is a kind of processing method that plastics and wood fiber are melted, smelted and extruded together with chemistry assistant agents.
木塑复合材料的加工技术是把塑料、木质纤维(稻壳、木屑等)与助剂一起熔融、混炼制成颗粒，再经过挤出成型的一种加工方法。
This paper introduces six methods of plastics molding and process, each technology, equipment, product and their development trend.
介绍塑料的六种主要成型加工方法及其工艺特点、加工设备、制品和发展前景。
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
This paper introduces the production technology, properties and applications of foamed polystyrene concrete mainly with discarded foamed polystyrene plastics and cement.
本文介绍了以废弃的聚苯乙烯泡沫塑料和水泥为主的聚苯乙烯泡沫混凝土的生产工艺、性质及应用。
Moreover, the application of nanocomposite technology in the improvement of the flame retardancy of styrene plastics were discussed briefly.
此外，还简要介绍了纳米复合技术在提高苯乙烯系塑料阻燃性能中的应用。
Microcellular plastics and their extrusion technology are introduced. Microcellular polymer processing and conventional extrusion foam processing is compared.
介绍微孔塑料及其挤出成型技术，并与一般挤出发泡成型进行了比较。
Moreover, the application of nanocomposite technology to improve flame retardancy of styrene plastics are discussed briefly.
此外，还简要介绍了纳米复合技术在提高苯乙烯系塑料阻燃性能中的应用。
The continuous extrusion molding technology of microcellular plastics was summarized.
综述了飞机用微孔塑料连续挤出成型技术。
It introduced the general situation, intension and developing trend of CAE for plastics extrusion dies from technology and application point of view.
从技术及应用的角度介绍了塑料型材挤出模cae技术的概况、内涵及发展趋势。
Automatic control technology for the parison wall-thickness of plastics blow-extrusion container is one of the key technology for the quality of the product.
在中空塑料容器的挤出吹塑成形工艺中，型坯壁厚控制技术是关系产品质量的关键技术之一。
On the positive development of plastic bottle recycling technology, the research and development of biodegradable plastics become the world plastics processing industry hotspot.
在积极开发塑料瓶回收再利用技术的同时，研究开发生物降解塑料成为当今世界各国塑料加工业的研究热点。
Fiber reinforced plastics bars are first produced in our country using extrusion technology.
采用挤拉工艺，研制生产出国内首批纤维塑料筋。
The technology of closed-loop parison automatic control, energy conservation and automatic production is used to improve the plastics extrusion hollow blow molding machine.
采用型坯自动闭环控制技术、节能控制技术及自动生产技术对塑料挤出吹塑中空成型机进行改进。
Recent progress of general engineering plastics and super engineering plastics is introduced and its processing application technology at abroad is presented.
介绍了国外通用工程塑料和高级工程塑料及其加工应用技术的最新进展。
This paper introduces some new technology of plastics molding.
简要介绍几种塑料成型新工艺。
In this paper, electroless technology had been used to coating Cu, Ni-B on the surface of plastic matrix first, and then to dissolve matrix plastics in solvent to get Ni-B foil.
本课题利用化学镀技术在塑料基体上镀铜、镀镍硼，然后将基体塑料溶解得到镍硼箔膜。
This paper has reviewed the current situation of the applications of microelectronic technology in plastics processing industry home and abroad.
综述了国内外电子技术在塑料加工业中的应用现状。
Theoretical basis for plastics mold design and plastics mold CAD and CAE technology were provided in this paper.
为塑料模设计和塑料模CAD及CAE技术提供了理论依据。
This paper introduces some USES and trends of computer simulation technology in plastics processing, especially in extrusion molding, blow molding and thermoforming.
介绍挤出成型、吹塑成型和热成型及其它成型方式的数值模拟技术，阐述了目前存在的问题和发展趋势。
Celanese will acquire Nilit Plastics' nylon compounding product portfolio as well as customer agreements and manufacturing, technology and commercial facilities.
塞拉尼斯将收购屹立塑料部的尼龙共混改性产品组合以及客户协议，制造工厂、技术和商业设施。
The present situations of reclamation and modification of waste plastics are introduced. The viewpoints on major technology, products and their developing trends are put forward.
本文介绍了废旧塑料的利用及改性技术现状，并就重点技术与产品及发展趋势提出了自己的看法。
The result shows that the application of multimedia technology to metal sheet plastics forming is a feasible scheme, which provided a new method for plastic forming study.
研究结果表明：多媒体技术应用于板料塑性成形是切实可行的，并且为以后的塑性成形研究提供新的手段。
The method (2) has the advantages of simple technology and higher yield(79%), but the product made in this method has lower florescent and higher whitening effect, so it is used for common plastics.
方法（2）工艺简单、收率较高（79%），属环保型工艺，产品的荧光效果差，增白效果好，适用于普通塑料制品。
It has an important significance to use CAE technology improving the plastics products quality.
注塑CAE技术对提高塑料制品质量有重要意义。
It has an important significance to use CAE technology improving the plastics products quality.
注塑CAE技术对提高塑料制品质量有重要意义。
应用推荐