Also made using MOLDFLOW made mold flow analysis, simulation plastics molding.
同时还做了利用MOLDFLOW做了模流分析，模拟塑件成型。
This series of products are mainly used to control automatically plastics mold temperature.
该系列产品主要用于塑料模具的自动恒温控制。
When you design this type of plastics mold, parting line must be designed according the Max silhouette curves.
当您设计这种类型的塑料模具，型线的设计必须根据马克斯轮廓曲线。
Theoretical basis for plastics mold design and plastics mold CAD and CAE technology were provided in this paper.
为塑料模设计和塑料模CAD及CAE技术提供了理论依据。
In this paper, we interpret a kind of ceramic absorbing-plastics mold, and discuss its material design and property and character of this mold. We also study the main point of the process.
本文研究了一种陶瓷吸塑模具，并着重阐述了陶瓷吸塑模具的材料、性能和特点以及该模具在制备过程中工艺路线和工艺要点。
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
Thermodynamic analyses, and sometimes coupling with kinetic estimation, to TRIP steels, cement carbides and mold steel for plastics are shown in the effort to designing modern advanced materials.
本文介绍了热力学和动力学分析预测在TRIP钢，硬质合金以及塑料模具钢研制中的应用，从而为现代先进材料的设计提供参考。
Gas assisted plastics injection molding process includes injection of polymer melt into mold cavity and then injection of gas-compressed into the polymer melt.
气体辅助注塑成型工艺包含塑料熔体注射和气体注射两部分，由气体推致力塑料熔体充满模具型腔。
The problems and the treatments related to the mold manufacturing, technological conditions and plastics materials, which are often encountered in mold forming, are collected and arranged.
对模具在工作中常遇到的与模具制造、工艺条件及塑料材料有关的问题及相应对策进行了归纳整理，组成了模具诊断与维修知识库。
TaizhouHuangyan Lucky Commodity Factory is situated in Huangyan, which is an appealing eastern coast city of Zhejiang Province, the city of plastics and also the town of mold.
台州市黄岩吉祥日用品厂位于风景秀丽的东海之滨，中国塑料之都，模具之乡— —浙江黄岩。
The paper introduces mold design keys and attentions of oblique gear made from plastics and oblique gear structure and mold design by analysis of example.
通过分析斜齿轮的结构特点并结合模具设计实例介绍了塑料斜齿轮模具的设计要点及注意事项。
It introduce an injection mold structure to eject the plastics part with compressed air, and points out several problems to pay attention to during the designing and manufacturing.
介绍一种利用压缩空气顶出塑料件的注射模结构。并指出设计、制造过程中应注意的几个问题。
Structural design and operational principle of molds for plastics piston pump housings are presented. The mold presents itself as a simple and rational piece of design work.
介绍了柱塞式液压泵塑料壳体注塑成型模具的结构设计和工作原理，该模具具有简单合理、动作可靠等特点。
Through analyzing the structure of plastics with inner screw, determined mold structure with gear and rack stripping screw mechanism.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.
在注塑模设计中，分流道+和浇口的设计对塑料成型的质量影响较大，一直是人机交互式流道+设计的难点。
Currently, the increasingly widespread application of plastics for the plastic mold to provide a broad market, while the mold is also a higher demand.
目前，塑料制品的应用日渐广泛，为塑料模具提供了一个广阔的市场，同时对模具也提出了更高的要求。
The practice shows that the CAE technology can guide mold design and molding of plastics strongly.
实践证明，CAE技术对于塑料模具的设计及塑料制品的成型具有较强的指导作用。
With the extensive use of plastics, injection mold is used more and more widely.
随着塑料制品的大量使用，注塑模的应用越来越广。
Installation base: Injection of plastics from a complete mold, mounting panel strongly connected to the joint.
固定底座：模具注塑一体成型，牢度强，不脱底。
Introduced structure design of injection mold for a fragrance cap, the molding parts surrounding exterior surface does not allow to have the draft, causing the plastics demoulding difficulties.
介绍了一款香水瓶盖注射模设计。该塑件周边外观面不允许有脱模斜度，从而使塑件脱模困难。
It specializes in TV Cabinet Design, Mold R&D and manufacturing, Plastics manufacturing, and Metal pressing products.
专业从事电视机壳设计生产、磨具开发与制造、塑胶制品生产及金属冲压制品的生产。
The working principle of DK8110 multiple—point—road mold temperature control system is expounded in detail. With the heat transfer theory of plastics injection moding process, the cooling and heat…
较详细地阐明了DK8110型多点多路模温控制系统的工作原理，结合注塑过程热力传导理论，对该系统的冷却与加热进行设计计算。
The working principle of DK8110 multiple—point—road mold temperature control system is expounded in detail. With the heat transfer theory of plastics injection moding process, the cooling and heat…
较详细地阐明了DK8110型多点多路模温控制系统的工作原理，结合注塑过程热力传导理论，对该系统的冷却与加热进行设计计算。
应用推荐