Polyurethane is manufactured without the use of plasticizers, which means it will retain its original performance characteristics.
聚氨酯是未使用增塑剂制造的，这意味着它将保留其原有的性能特点。
Phthalate esters are commonly used as plasticizers in many products.
邻苯二甲酸酯主要用作塑料增塑剂，普遍存在于环境中。
The loss of plasticizers was determined by using accelerated tests method.
用加速试验考察贮存时增塑剂的损失。
Children and especially pregnant women should avoid being exposed to plasticizers.
儿童，特别是孕妇应当避免摄入塑化剂。
Not having plasticizers also means it will not leach out hazardous compounds in the field.
不使用增塑剂，也意味着它不会释放出有害化合物。
It is demonstrated that plasticizers can effect the function potential and selectivity of electrodes.
证明增塑剂可从功能电位及选择性两方面影响电极的性能。
The more nitrate ester group, the higher the combustion rate of propellant with different plasticizers;
含不同增塑剂的推进剂的燃速随增塑剂中硝酸酯基含量的增加而增加；
Effects of different fillers, different plasticizers on the cover properties of light PVC conveyor belts were studied.
研究了不同填充剂、增塑剂对PVC轻型输送带覆盖胶性能的影响。
Influence of complex plasticizers containing glycerol and xylitol on the soy protein plastics characteristics was studied.
研究了甘油和木糖醇复合增塑剂对大豆蛋白塑料特性的影响。
The results showed that the tensile strength, Young's modulus of soy protein plastics with complex plasticizers increased.
结果表明，采用复合增塑剂，大豆蛋白塑料的拉伸强度，杨氏模量均增加。
Experiment and analysis were set for retarder, and retarding plasticizers were matched to analyze the concrete performance.
对缓凝剂进行试验和分析，并配置缓凝型减水剂，对混凝土的性能进行分析。
The native starch was transformed to thermoplastic starch (TPS) by the torque rheometer, single screw extruder and plasticizers.
利用转矩流变仪、单螺杆挤出机和增塑剂将天然淀粉转变为热塑性淀粉（TPS）。
By comparing the test results, the performances of polycarboxylic plasticizers and Naphthalene plasticizing agent are discussed.
通过对比试验，比较聚羧酸系塑化剂和萘系塑化剂的性能，并对结果进行了讨论。
In addition, the promoting of glucose-acid Na added with the super plasticizers into HPC can highly improves the strength of concrete.
另外，在高性能混凝土中，葡萄糖酸钠与高效减水剂复配，还可提高混凝土的后期强度。
The effect of different starches, plasticizers, additives and modification methods on properties of starch-based food packing films is discussed.
范围涵盖了淀粉的选择，塑化剂及其他添加剂的种类，不同的淀粉改性方法对膜性能的影响。
The second chapter introduces the plastic packaging Ham phthalate plasticizers in the pre-treatment methods, including extraction and purification methods.
第二章详细介绍塑料包装西式火腿中邻苯二甲酸酯类增塑剂的前处理方法，包括提取及净化方法。
The influence of two kinds of plasticizers on the mechanical properties of the vinyl chloride-vinyl isobutyl ether copolymer resin coating has been investigated.
研究了两种增塑剂对氯乙烯-乙烯异丁基醚共聚物树脂涂层力学性能的影响。
The effects of the kinds and levels of flame-retardants, the levels of plasticizers on the mechanical properties and flame resistance of the blend were investigated.
探讨了阻燃剂、增塑剂用量对共混体力学性能和阻燃性能的影响。
The phthalate plasticizers over time, temperature and other conditions change gradually migrate from the plastic to the food, resulting in the contamination of food.
而邻苯二甲酸酯类增塑剂会随着时间、温度等条件的变化逐渐从塑料向食品中迁移，从而导致食品的污染。
This paper describes the influences of some curing agents, plasticizers, filling materials on epoxy resin properties. An ideal compounding is obtained by orthogonal test method.
研究了不同种类固化剂、增韧剂、填料及用量变化对环氧树脂综合性能的影响。运用正交实验总结出了一组最佳配方。
A poly (ether urethane) (PU) was synthesized via solution polymerization, which was mixed with LiClO4 and various plasticizers to generate a series of novel solid polymer electrolytes.
利用溶液聚合方法合成了聚醚聚氨酯，并以聚氨酯、高氯酸锂和增塑剂为组分，制备了一系列新型聚合物固体电解质。
Its major USES are in nitrocellulose lacquers and other resin coatings, as a selective solvent for pharmaceutical products, in plasticizers, and in manufacturing chemically related organics.
它主要用于硝基漆及其他树脂涂料，还用作医药产品的选择性溶剂，并用于增塑剂及制造与化学有关的有机物。
The results showed that some kinds of thermoplastic elastomer different in properties could be prepared by adopting different mass ratios of polymers, different plasticizers and different fillers.
结果表明，通过不同的聚合物质量配比、增塑剂的选择以及不同填料的选用，可制得不同性能的热塑性弹性体。
The results showed that some kinds of thermoplastic elastomer different in properties could be prepared by adopting different mass ratios of polymers, different plasticizers and different fillers.
结果表明，通过不同的聚合物质量配比、增塑剂的选择以及不同填料的选用，可制得不同性能的热塑性弹性体。
应用推荐