The optimum fertilizer kinds of the soil were decided by the sticky plastic curve characteristic.
土壤的宜肥种类可以通过粘韧曲线型的特征来判断。
The drop of his forehead, his brow, the slope of his nose, his eyelashes and the curve of his eyes, the plastic profile of his mouth, talking, these are all outlined in black against the stars.
他说话时，他的额头，他的眉毛，他的鼻梁，他的睫毛以及他眼睛的曲线，他嘴唇的侧面，统统被星光勾勒成黑色。
The significance and prospect for the application of plastic drain boards to soft-soil foundation in the northeast cold areas are analysed in terms of degree of consolidation and settlement curve.
通过对固结度以及沉降曲线的分析来说明塑料排水板法处理东北寒区软土地基的重要意义和应用前景。
The compression process of a cylindrical-helical spring is analyzed. Distribution of the spring's mechanical parameters and load-distance curve are achieved. Plastic deformation is included.
用有限元方法分析了一种圆柱疏圈螺旋弹簧的压缩变形过程，获得了弹簧的力学参量分布、载荷-行程曲线等结果，包括了弹簧发生塑性变形的情况。
The point of intersection of elastic line and plastic line moves toward the low cycle life with the hardness of the spring steel raised after tempering from the strain fatigue curve.
在应变疲劳曲线上，弹性线和塑性线的交点随弹簧钢回火后硬度的升高而向低循环寿命移动；
Forged part and forming procedure and stroke-load curve obtained from rigid plastic FE simulation further discloses the deformation mechanics of closed die extrusion for spiral bevel driving gear.
刚塑性有限元计算所得的齿轮锻件图、成形过程图、轴向断面网格图和力能曲线进一步揭示了螺旋伞齿轮塑性成形机理；
This article introduce the "cap yield curve model", simplify the cap yield surface and plastic potential energy surface by ellipse and circle, and get a new justify condition.
本文通过引入帽子屈服曲面，并对帽子曲面和塑性势能曲面用椭圆函数和圆函数形式进行了简化，从而得到了新的判定条件。
The yield point represents the dividing line or transition from the elastic to the plastic region of the curve.
屈服点是弹性变形区域到塑性变形区域之间曲线的过渡点。
Using the new technique, the stress-strain curve of plastic concrete was significantly improved and showed more stable and reliable behavior.
使用新的技术，显着提高了塑性混凝土的应力应变曲线，显得更加稳定和可靠。
By analyzing the real stress - strain curve with theory of plastic instability and using this testing method, another form of the forming limit diagram has been found.
在利用共稳理论对实际应力应变曲线进行分析的同时，得出了求作板材成形极限图的新方法。
Based on the curve of mill elastic deformation and the curve of strip plastic deformation, the influence of some factors on the strip exit gauge is analyzed.
以轧机的弹跳方程为基础，结合轧机的弹跳方程曲线和轧件的塑性曲线分析了各种干扰因素对轧件出口厚度的影响。
When we only applied phosphate fertilizer the curve of the ultra clay limit at the acidic field fell considerably below the sticky limit curve and the plastic limit curve fell also.
单施磷肥，超粘限曲线在酸方大大降落于粘限曲线之下，韧限曲线也降低。
Furthermore, the failure assessment curve method is a feasible method for notch elastic-plastic fracture assessment.
进一步说明失效评定图方法也是缺口弹塑性断裂评定的极好方法。
Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.
以鞍座泡沫塑料垫成型模为例，阐述了曲面型腔模具的锌基合金铸模工艺，同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。
Pastor thoughtlessly told him: "it is one of the most perfect camel back, no matter in the curve or plastic, all god's perfect masterpiece."
牧师不假思索地告诉他：“那是我见过驼得最完美的一个背，不论在曲线或造形方面，都堪称是上帝最完美的杰作。
Three simulation methods for hysteretic curve of steel braces, including phenomenological description method, finite element method and plastic-hinge method, were reviewed.
钢支撑滞回曲线主要有三种模拟方法：现象描述法、有限元法和塑性铰法。
Based on the yield criterion and plastic potential theories, a plastic constitutional relation, yield condition and yield curve equation in plane strain for powder metallurgical material were derived.
粉末冶金材料屈服条件是粉末冶金材料广义塑性理论的基础，其数学表达式对粉末冶金材料广义塑性理论方法的建立有重要影响。
On condition that plastic melt volume undergoes a uniform change, the authors analyse the internal shape of pipe die and produce an optimum shape curve.
以流道间隙处熔体体积均匀变化为条件，对管材挤出成型机头内腔的形状曲线进行分析优化，并且导出了一个优化曲线。
The results indicate that the wear of gauge-rail and the plastic flow are dominant for heavy-haul curve rail, and the fatigue behavior is primary for high-speed rail.
钢轨侧磨与压溃是重载曲线段钢轨的主要损伤类型，而高速铁路钢轨主要表现为疲劳损伤特征；
There is sudden change of slope in the stress-strain curve, because the core response in loading and unloading is entirely elastic, while the aluminum undergoes elastic-plastic deformation.
由于在拉伸过程中复合芯只表现出弹性变化，而铝绞线要发生弹塑性变形，使导线的应力应变曲线上存在斜率的突然变化；
Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.
以鞍座泡沫塑料垫成型模为例 ，阐述了曲面型腔模具的锌基合金铸模工艺 ，同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。
Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.
以鞍座泡沫塑料垫成型模为例 ，阐述了曲面型腔模具的锌基合金铸模工艺 ，同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。
应用推荐