At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
The influence of paper and plastic packaging on environment are assessed by the method of life cycle analysis (LCA) in this paper.
采用国际通用的生命周期分析(LCA)方法，评价了纸和塑料包装对环境的影响。
According to the engineering theory of plastic bending, the elastoplastic bending analysis of a beam is conducted using differential quadrature method.
根据梁塑性弯曲的工程理论，采用微分求积法进行了梁的弹塑性平面弯曲分析。
Besides that, on the basis of studying the elastic and plastic finite element method and mechanics knowledge, the paper analyze a steel continuous beam by the large analysis software ANSYS.
另外在研究弹塑性有限元法和力学知识基础上，利用大型有限元分析软件ANSYS对连续钢梁进行弹塑性分析，使塑性设计法的理论依据得以验证，并使认识更为直观。
This paper presents the elastic plastic analysis results of mono strand anchor head by the finite element method.
本文采用有限元方法给出了单孔锚具的弹塑性分析结果，分析了摩擦系数对锚具性能的影响。
In this paper, the method of singularity function is applied to the structural plastic limit analysis, and simplified the calculation of limit loads of some annular plates of fixed supports.
本文将奇异函数法应用于结构的塑性极限分析，简化计算某些固支环形板的极限荷载。
We also use plastic combustion and plastic subzero pleating method to analysis the properties of modified nylon66 resin.
本文主要按照塑料机械性能试验方法总的要求对改性尼龙66各阶段的结果做机械性能的分析、检测；
The yield criterion of composite materials is simulated by using the homogenization method of micromechanics and the plastic limit analysis theory.
运用细观力学中的均匀化方法和塑性力学中的极限分析理论，分析了复合材料的屈服准则。
The theory can be used to study the distributed strain, strain rate, porosity and plastic shear displacement in fault band, which presents a new method for quantitative analysis of ductile shear zone.
梯度塑性理论可用于研究韧性断层带内部应变、应变率分布规律、断层带错动位移及带内孔隙度分布规律，为韧性断层带定量分析提供了新的手段。
In this paper, the method of weighted residual is applied to the structural plastic limit analysis.
本文将加权残数法应用于结构的塑性极限分析。
It is shown by the instance of criticality analysis of plastic extruder that the proposed method is effective for evaluating the equipment criticality.
将其应用到塑料挤出机的重要度分析中，结果表明，该方法对设备重要度的确定是有效的和实用的。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
Over detail analysis of mould structure working process and disassemble dies process an injection mould design method of solving this kind of plastic parts is introduced.
通过对模具结构、模具工作过程、卸模过程的详细分析，介绍了一种解决此类塑料件注射模的设计方法。
The theory and method of the plastic limit analysis are introduced systematically.
系统地介绍了结构塑性极限分析的原理和方法。
Forging mechanism is very complicated, and numerical simulation is the most effective method for plastic deformation analysis.
锻造成形机理非常复杂，数值模拟是目前塑性成形分析最有效的方法。
An optimization method for preform die shape in non-isothermal metal forming using plastic finite element method, sensitivity analysis and engineering optimization algorithm is presented.
采用塑性有限元、灵敏度分析和工程优化算法相结合的方法，对非等温成形过程中预锻模具形状进行了优化设计。
In this paper, an engineering assessment method of elastic-plastic fracture based on finite deformation analysis of complex structures. or a modified COD -design equation, presented forward is put.
文章在有限变形分析基础上建立了对复杂结构进行弹塑性断裂评定的工程方法，用以修正COD设计曲线。
By introducing the generalized method of cells (GMC) into plastic limit analysis, the bearing capacity of ductile composites is studied.
本文将细观力学中的单胞(GMC)模型运用到塑性力学的静力极限分析中，研究韧性复合材料的塑性极限承载能力。
The test results are compared with calculated values of elastic—plastic dynamic analysis, thus the appropriateness of pseudo dynamic test method and reliability of calcula…
文中将试验结果与弹塑性动力分析的计算值进行了对比分析，从而说明拟动力试验方法的妥当性与计算方法的可靠性。
This paper presents a simplified plastic zone method with consideration of the influences of the plastic zone length on the stiffness matrix for elastic-plastic analysis of steel frames.
对于杆件单元，本文采用了一种变刚度的杆单元模型，建立了考虑塑性铰分布长度影响的构件单元刚度矩阵。
In this paper, facing the convergent problem of plastic forming using large incremental step, we deduced the iterative formula used in analysis of elastic-plastic plate forming finite element method.
此文针对塑性成形有限元分析大增量加载的收敛性困难，推导了用于板料成形弹塑性有限元分析的牛顿一致迭代公式。
The refined plastic-hinge method is one of the simplified advanced analysis methods.
改进塑性铰法是一种简化的高级分析方法。
This paper analysis on CNC WEDM apply in the plastic mould process, and discuss special method of WEDM in the plastic mould process.
分析了数控电火花线切割加工在塑料模加工中的应用场合，探讨了数控电火花线切割加工在塑料模加工应用中的几种特殊方法。
Three-dimensional rigid-plastic finite elements, elastic finite elements and influential function method for the analysis of deformation of rolls system are combined.
它耦合了三维刚塑性有限元法，弹性有限元法和计算辊系变形的影响函数方法。
Based on the theory of elastic-plastic deformation, according to the finite element method, this paper presents a nonlinear analysis of the distribution of the soil pressure of the ditch conduit.
表明对大型沟埋式管道的上压力，采用弹塑性理论的非线性分析是比较符合实际的，其结果可供设计参考。
With the macrographic method, chemical composition analysis and microstructure observation, an analysis was made of the reasons about Swap Blocks of the Roller of XKP-560 Financials Plastic Machine.
通过宏观检查、化学成份分析、显微组织观察，对XKP-560 破胶机辊筒光辊开裂掉块原因进行了分析。
When conducting analysis method of reducing dimension to the rate of picking up spring plastic mulch, the analysis was conducted with comparing with the rate of picking up autumn plastic mulch.
在对春膜收膜率进行降维分析时，是按与秋膜收膜率相对比进行的。
A modified three-dimensional plastic limit analysis method is proposed for lateral bearing capacity of the large-diameter pipe pile in the inhomogeneous and anisotropic soft ground.
对于非均质各向异性软土地基上管桩基础的承载力，基于塑性极限分析理论考虑软土强度的非均质与各向异性效应，提出了一种改进的三维极限分析上限解法。
The basic equations with Mohr-Coulomb criterion are solved by the line field analysis method near the joint line in an elastic-perfectly plastic materials.
通过在节理线上提出合理的边界条件，得出了节理线附近的弹塑性区应力场。
This paper presents a method for estimating the elastic-plastic dynamic J integral value by finite element analysis.
本文介绍用有限元估算弹塑性动态j积分值的方法。
应用推荐