The basic idea of the reactive plasma spray (RPS) was presented.
阐述了反应等离子喷涂(RPS)方法的基本思想。
The feeding system of liquid feedstock was equipped on the bases of general high energy plasma spray equipment.
在采用常规高能等离子喷涂设备的基础上，配备了液料送进系统。
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。
Test results show that type of metal powder spray has great influence on the improvement of fatigue properties by plasma spray.
疲劳试验结果表明喷涂合金粉末类型对喷涂后接头疲劳性能影响较大。
On this basis, the paper established a model for predicting the plasma spray coating quality under different process parameters.
在此基础上建立预测模型，对不同工艺参数下等离子熔射层进行质量预测。
A novel plasma spray power supply based on ZVS soft-switching technology and double close loop control mode is presented in this paper.
介绍了一种基于零电压软开关技术和双闭环控制模式的大功率等离子喷涂高频开关电源。
The stainless steel plungers and bushes with plasma spray chrome oxide coating provide the maximum resistance to corrosion and abrasion.
不锈钢柱塞和等离子喷涂铬氧化物涂层灌木丛提供最大的抗腐蚀性和耐磨性。
Plasma spray is perhaps the most flexible of all of the thermal spray processes as it can develop sufficient energy to melt any material.
我们公司生产的等离子体涂层喷枪，可能已经成为热喷涂工艺最灵活的设备，因为该设备可提供足够的热能软化任何材料。
A new ceramic coatings sealing faucet valve was developed by treating valve sealing surface with plasma spray surface treatment technology.
针对阀门密封面使用寿命低的的问题，采用等离子喷涂表面处理技术处理阀门密封面，研制了一种新型的陶瓷涂层密封旋塞阀。
Plasma spray metal tooling has obtained a special attention for its advantages of fewer limits on the pattern's size and spraying materials.
等离子熔射快速模具制造是快速模具制造技术的一种，因其具有不受模具尺寸和熔射材料限制等优点而受到关注。
It can be used to spray metallic, carbide and oxide powders. The supersonic plasma spraying gun has a single-anode, internal feeding structure.
单阳极内送粉结构的高效能超音速等离子喷枪，为国内外研究超音速等离子喷涂技术开创了一条新路。
Since it USES powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited.
该设备使用粉末做涂层给料，所以在等离子体工艺中使用的涂层材料的数量几乎是无限量的，是一款您理想的选择。
Applying PLC to the plasma spray welding system was helpful for enhancing the quality of triple eccentric butterfly valve and the system stability.
采用可编程控制器(P LC)控制有助于提高三偏心蝶阀喷焊质量与系统稳定性。
Methods The titanium porous surfaced implant was made by plasma spray with ti powder. It's ti coated porous surfaced was observed analysed and tested.
方法选用等离子喷涂方法，将纯钛粉喷涂到纯钛桩表面，形成表面多孔种植体，并对涂层成份进行分析，力学测试粘接强度及扫描电镜观察表面形态。
The interface between plasma spray hydroxyapatite (HA) bioactive gradient coating and ti 6al 4v matrix was studied using transmission electron microscopy.
用透射电子显微镜对钛合金基体等离子喷涂羟基磷灰石(HA)生物活性梯度涂层的界面进行了观察与分析。
The technical advantages of vacuum plasma spray over conventional chemical vapor deposition(CVD) and air plasma spray in tungsten coating were also discussed.
和CVD方法以及常压等离子体喷涂方法制备的钨涂层相比，低压等离子体喷涂具有明显的优势。
Separately Mixed two different property molybdenum powder with the same nickel-chromium-boron-silicon alloy, then carried out plasma spray piston ring experiments.
试验用两种性能不同的钼粉与同一种镍基合金粉混合，进行了工业等离子喷涂活塞环对比试验。
With the combination of current-injection technology and plasma spray converter research, a full range soft-switching plasma spray converter is produced successfully.
将电流注入移相控制技术与大功率软开关等离子喷涂逆变器的研究相结合，研制成功全范围大功率软开关的等离子喷涂逆变器。
Experimental study was carried out to investigate the influence of the main processing parameters on the quality of sprayed coatings during the plasma spray tooling process.
在等离子熔射成形中，粒子的飞行特性是影响沉积率和涂层动态生长质量的重要因素，而熔射工艺参数又是影响粒子飞行特性的直接因素。
The technical process of plasma spray welding is complex and requires the control system to have high reliability. PLC used in this system can enhance the quality of spray welding.
等离子喷焊工艺过程复杂，对控制系统的可靠性要求高，采用PLC控制有助于提高喷焊质量。
In this paper, the principle and procedure of the method, measuring porosity of the plasma spray forming parts, are introduced. Some questions referring to the process are discussed.
介绍一种等离子熔射法成形件的孔隙率测定方法、原理与步骤，并讨论与之相关的问题。
Plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.
等离子喷焊电源是为等离子弧提供能量的电源，涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。
The thin shell parts for special materials was manufactured by using plasma spray forming technique, which could protect fragile and expensive parts that might not be sprayed directly.
采用等离子喷涂成形法制造某些特殊材料的薄壁件，以保护那些不允许直接进行等离子喷涂的脆弱零件及贵重零件。
The robotic automatic polishing system for plasma spray rapid mould has been developed with discussion about how to design robot polishing track, choose effective flexible polishing tools.
为了解决熔射制造大中型汽车覆盖件模具过程中人工研磨抛光时间长、劳动强度大等问题，本文建立了面向熔射快速制模的机器人曲面自动抛光系统。
According to operating mode of the cathode in the thruster, the design of the cathode structure, including selection of the materials and the technology of the plasma spray, were described.
根据阴极在推进器中工作方式，对阴极结构设计进行了描述，包括材料选择和等离子体喷涂工艺制造。
This paper introduces the new development of micro-structural, mechanical property, coating surface treatment and physical property of Plasma spray coating in recent years at home and abroad.
本文介绍了等离子喷涂涂层的微观结构，力学性能，涂层表面处理及物理性能等国内外最新的研究进展。
The technology of Plasma Powder Deposition Manufacturing (PPDM) integrates the plasma spray welding and finishing technology to manufacture the metal part or prototyping directly and rapidly.
等离子熔积快速制造技术是采用等离子熔积与光整技术集成直接快速精细制造金属零件原型或零件。
Air plasma spray technique was used to gain a thin and porous anode layer of intermediate temperature solid oxide fuel cell SOFC by taking charcoal active powder as pore-forming agent in this paper.
采用大气等离子喷涂技术，以活性炭粉作为成孔材料，获得了薄且多孔的中温固体氧化物燃料电池s OF C阳极层。
In this paper, prevailing TBC deposition technologies, including plasma spray, electron beam-physical vapor deposition, ion beam assisted film deposition and chemical vapor deposition, are reviewed.
综述了热障涂层研究及应用中的几种主要制备技术，包括等离子喷涂、电子束物理气相沉积、离子束辅助沉积、化学气相沉积等。
应用推荐