The twinning process in a magnesium AZ31 alloy with initial texture is quantitatively analyzed during plane-strain compression by means of orientation mapping based on EBSD technique.
利用背散射电子衍射取向成像技术，定量分析了具有初始织构的AZ31镁合金平面应变压缩时的孪生过程。
In this paper, the test results of bending concrete specimens are shown, and the vlues of plane-strain fracture toughness, calculated by four different methods, are compared with one another.
本文，对混凝土弯曲试样进行了测试，并用四种不同的方法进行了平面应变断裂韧性的计算和比较。
In order to study the effect of elastic modulus e, to the safety factor and slip plane of slope, a numerical model is founded in plane strain mode for homogeneous soil slope.
为了研究弹性模量对边坡安全系数和滑动面的影响，建立均质土坡数值模型，在不同工况下(无锚和有锚)，分别改变弹性模量，分析它与安全系数和滑动面的关系。
The retaining wall for remaining stability of slope are all designed as plane strain problem in elastic theory.
维护边坡稳定的挡土墙设计，都是按弹性力学平面应变问题分析的。
The extrusion of compressible material in plane strain is analysed in use of UBET and compared to fully dense material.
应用上限元方法分析了可压缩材料平面应变挤压问题，并与致密材料进行了比较。
Failure processes of sheet metals are modeled under plane strain tension.
在平面应变拉伸的情况下仿造了板形的失效过程。
By using plane strain FEM in this paper, the affection is analysed about differential settlements value to pavement structure.
本文运用平面应变有限单元法，分析了不同沉降量对路面结构的影响。
The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.
采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
With this method, the transversal stresses are solved as a plane strain problem, and consequently the longitudinal stresses are calculated with an analytic formula.
该方法按平面应变问题求解横向温度应力，在此基础上用解析公式计算纵向温度应力。
This paper use the plane strain hypothesis to build a reasonable study model of numerical simulation.
文章根据平面应变假设，建立了合理的数值模拟研究模型。
It is found that lateral deformation exists, which implies the condition of plane strain does not fulfill.
试验表明沿滚轮和轨道的侧向存在变形，不满足平面应变问题的条件。
Strain localization and macroscopically mechanical behaviors of rock specimen with and without material imperfection in plane strain compression were modeled numerically by FLAC.
在平面应变压缩条件下，采用拉格朗日元法研究了材料缺陷对岩样应变局部化及宏观力学行为的影响。
The general solution for plane strain problems in decagonal quasicrystals accounting for thermal effect is derived.
推导了当考虑热效应时十次对称二维准晶体平面应变问题的通解表示。
Casing, cement and formation plane strain mechanical model are established, considering casing with initial ovality.
针对套管的不同初始椭圆度建立了套管、水泥环、地层平面应变力学模型。
The new result here explains the difference between the cases of plane strain and plane stress.
新的结果还解释了平面应力和平面应变问题的区别。
The development and reason of asymmetric flow pattern during plane strain compression was analyzed.
分析了平面应变压缩过程中金属的非对称流动方式的进展以及产生原因。
The restraint level of plane stress is lesser than that of plane strain at the same mixed condition.
平面应力条件下裂端的约束水平远低于相应条件下平面应变时裂端的约束水平。
The two dimensional accurate solution is obtained on plane strain assumption, the numerical results of strain energy release rate and crack tip energy release rate are presented.
在平面应变假设下，给出其二维精确解，并提供了机械应变能释放率和裂尖能量释放率等数值结果。
This paper introduces a new way for defining the maximum principal strain direction in plane strain condition.
本文介绍了一种确定平面应变中最大主应变方向的新方法。
Furthermore, from the analytical results indicate that the shear band mode of discontinuous bifurcation is essentially identical with slip line in the plane strain condition.
进一步分析表明，对于平面应变情形，剪切带同滑移线本质上是一致的。
The salt formation is regarded as Maxwell model, and a viscous elastic mechanical model for plane strain features is established.
将盐层作为马克斯威尔体，建立了平面应变问题的粘弹性体力学模型。
In this paper, finite element method for the settlement of composite ground based on composite constitutive law is proPOsed on condition of plane strain.
提出了平面应变条件下复合地基沉降计算的复合本构有限元法。
Furthermore, a generalized upper bound method for powder metallurgical material in plane strain was developed and its application was illustrated by analyzing the plane strain extrusion.
基于此建立了粉末冶金材料平面应变广义上限法，并以平面应变挤压为例说明了该方法的应用。
The approach is based on the assumption that necking mode can be modeled under plane stress conditions and shear localization can be modeled under plane strain conditions.
这种方法是以一种假设为基础的，即可以在平面应力条件下仿照缩颈模式和在平面应变条件下仿照剪切定位，材料是用弹、粘塑性物质构成的仿制品。
Results also show that the scale effect in plane stress state is slightly stronger than that in plane strain state.
并发现在平面应力状态下，梁的梯度效应略强于平面应变状态。
The detailed forms of the functional equations and the final governing equations for solutions are given for the cases of plane strain and plane stress.
对于平面应变及平面应力的情况分别给出函数方程与定解方程的具体公式。
Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.
通过引入应力复数和应变复数的概念，提出了平面应力分析和平面应变分析的复数方法。
Plane strain state is familiar in geotechnical engineering, and estimating the principal stress in the plane strain state is very complicated.
土的平面应变是岩土工程中常见的状态，其中零应变方向的主应力是十分复杂的。
Study of tests for measuring lateral strain localization of undisturbed clay in the condition of plane strain compression was rarely reported at home and abroad.
原状粘性土在平面应变条件下量测侧向局部变形的试验研究国内外鲜见报导。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
应用推荐