This course mainly teaches the design aesthetic and design method of space form, and focuses on the design aesthetic of the planar modeling.
本课程主要讲授空间形态设计美学与设计方法，着重于主要讲授二维平面造型设计审美方面的内容。
The research results show that this method can effectively detect planar defects.
试验结果表明该方法能够有效检测平面缺陷。
This method can be applied in the computer-aided design and analysis of arbitrary planar optical waveguide structures.
该方法可用于任意复杂结构的平面光波导的计算机辅助设计与分析。
A planar barefoot impression image segmentation method base on Gaussian fitting is proposed.
提出一种基于高斯拟合的平面赤足迹图象分割算法。
Therefore, this method is able to solve the singular position of all complicated multilooped planar linkages and manipulators.
因此，该方法可求解所有复杂的多回路平面机构及操作手的奇异位置分析。
The flow field of planar jet is simulated by discrete vortex method.
采用离散涡方法对平面射流流场进行了数值模拟。
The matching relation between the viscosity and the mesh size was obtained using planar approximate method and integral method in the numerical modeling of divergent detonation.
分别应用平面近似法和积分方法推导出在散心爆轰的数值模拟中，人为粘性系数和空间步长之间的匹配关系。
This paper proposes a method of interference suppression for a random planar array.
本文提出一种任意平面阵列抑制干扰的方法。
Making method of high deep-width rate, batch production of planar windings with LIGA process and silicon deep etching process is researched .
较深入地研究了以LIGA工艺、硅深刻蚀工艺为主的平面绕阻的高深宽比、批量化制作方法。
Based on singularity of constraint equation and complex division of structure-parameter-space, the dimension classification method of planar mechanism was researched.
以位置约束方程奇异性条件和结构参数空间复形剖分方法为基础，研究了平面机构尺度分类问题。
By using this method, the characteristics of propagation for diffused planar waveguides are calculated and compared with the finite element method.
给出了公式推导，计算了扩散各向同性及扩散各向异性平面光波导的传播特性，并与其它方法所得结果进行了比较。
Some problems of optimum synthesis of planar multi-bar linkages are studied by the penalty function method with equality and inequality constraints.
在此基础上研究了利用等式约束与不等式约束的惩罚函数法对平面多杆机构进行尺度最优综合的有关问题。
The dispersion characteristics of the shielded planar transmission lines are analyzed by the transverse resonance method combining with variational technique.
本文利用横向谐振法结合变分技术分析了屏蔽平面传输线的色散特性。
An example applied to multi link complex planar mechanism has been included to illustrate the method.
给出一个平面多杆复杂机构应用实例来说明这一方法。
A global optimization method is presented to optimize the multi-layer planar inductors.
为多层平面电感设计提出了一种全局优化方法。
The method of planar region field density generation from collected scattered data and the color mapping methods of field density visualization were developed.
研究了从采集的离散点场强生成整个平面区域的场强的插值方法，及生成的场强数据可视化的颜色映射方法。
This paper introduces a simple graphic method for designing the planar crank slide block mechanism with urgent returning specific property and gives theoretical proof.
介绍了设计有急回特性的平面曲柄滑块机构的简易图解法，并给出了理论证明。
A geometric spline method for shape control of planar manipulators with hyper degrees of freedom was presented.
本文提出了平面超自由度机器人形状控制的样条曲线方法。
Numerical distributed transfer function method is applied to planar optical waveguides.
把数值传递函数方法应用于对平面光波导的分析。
This paper introduced a bond graph method for the dynamical static force analysis of planar elastic linkage, and presented a bond graph model of this linkage.
本文介绍了平面弹性连杆机构动态静力分析的键合图法。给出了平面弹性连杆机构的键合图模型。
A finite element method is presented to determine the steady state elastic responses of planar mechanisms with distributed mass, operating at a prescribed input rotary speed.
本文给出了一种求解具有均布质量、恒定输入转速的弹性平面连杆机构稳态响应的有限无法。
Apparatus for conforming a planar film on an optical lens, method for functionalizing an optical lens by means of said apparatus, the optical lens so-obtained.
用于在光学镜片上成形平面膜片的装置，使用所述装置实现光学镜片的功能化的方法，由本方法所制得的光学镜片。
The cube formed after cutting one part off the same planar graph in different ways of motion and its method of calculation are introduced.
介绍了同一平面图形按不同方式运动截取一部分形成的立方体的图形及计算方法。
Experimental results show that the proposed method can be effectively applied to planar barefoot impression segmentation.
试验结果表明，该算法实现了平面赤足迹的有效分割。
A method for planar near field to far field transformation based on element current reconstruction is presented and the basic principle of this method is given.
本文提出了一种新的基于单元电流重构的平面近远场变换方法，给出了该方法的基本原理。
This text begins with the analysis of subjective method testings MRTD, brings up an objective method based on Artificial Neural Network and used planar CCD to measure MRTD.
从分析测试热像仪性能参数MRTD的主观方法入手，提出了一种基于神经网络用面阵CCD测量MRTD的客观方法。
FEM analysis and assembly method of a planar array antenna in radar of bigger size and better mobility.
本文介绍了一种较大尺寸的平面阵列天线的机动型雷达的结构设计、有限元分析和总成方法。
A universal method of intelligent identification was introduced. Basing on the method, the intelligent analysis software of planar combined mechanism was developed.
介绍了一种具有普遍意义的机构智能化识别方法，以及以该方法为基础开发的平面组合机构智能分析软件。
The spectrum classification method for planar kinematic chain with multiple hinges was put forward by taking this as a base, and the relevant algorithm was presented.
在此基础上提出了含复铰平面运动链的谱分类方法，并给出了相应的算法。
The spectrum classification method for planar kinematic chain with multiple hinges was put forward by taking this as a base, and the relevant algorithm was presented.
在此基础上提出了含复铰平面运动链的谱分类方法，并给出了相应的算法。
应用推荐