The built-in float pin rod comprises a hard and a soft slide rod, and moves only in the hollow holding handle, the bending spring, and the hollow casing for the rod body.
内置式浮动销杆又由硬体滑杆和软体滑杆组成，浮动销杆只能在空心的握柄、弯力弹簧和空心的竿身套管内移动。
It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.
转向系统包括转向盘，转向轴，蜗杆，扇形齿轮，转向摇臂，直拉杆，转向节臂，主销，转向臂，转向直拉杆，前轴和转向节。
It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.
转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。
The connecting rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.
连杆的一端与曲轴的连杆轴颈相连，另一端通过活塞销与活塞相连。
When the piston is moved by vacuum, its velocity changes in steps, for the mass of piston pin and rod are connected in turn.
当活塞在真空作用下运动时，由于活塞销和连杆的质量是依次连接的，活塞速度呈阶梯式变化。
The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.
转向横拉杆长度的设置要保证转向横拉杆与转向节臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。
A cathode in an indirectly heated cathode ion source is supported by at least one rod or pin.
非直接加热阴极式离子源的阴极被至少一个杆或钉支撑。
The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.
转向横拉杆长度的设置要保证转向横拉杆与梯形臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。
Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.
导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。
The connecting rod is attached to the piston by the piston pin.
连杆与活塞的连接是采用活塞销。
The piston pinhole in the piston also serves as a bearing for the piston pin, which is used to connect the connecting rod.
在活塞中活塞销孔也同样为活塞销形支承面，其作用为连接连杆。
The connecting rod little end is connected to the piston pin.
连杆小头连接着活塞销。
This pin allows the connecting rod to follow the motion of the crankshaft.
这个别针允许连接杆跟随曲轴的行动。
One end of a connecting rod on both sides of the screw nut is connected with the pin of a sliding chassis, and the other end is hinged with the screw nut.
螺母两侧的连接杆一端与滑动机架上的销轴连接，另一端与螺母铰链。
The locking tie rod or pulling rope is connected with locking pin.
锁闭拉杆或拉绳与锁闭销连接。
A tripping device comprises a traction rod, a thermoelement, a bimetallic element, a magnetic system, a lock catch, and a jump pin.
脱扣装置包括牵引杆、热元件、双金属元件、磁系统、锁扣及跳扣。
Our main products include chain track, track roller, carrier wheel, guiding wheel, driving wheel, track shoe screw, shaft sleeve, pin, bushing, and link rod, recoil spring etc.
我们公司专业生产挖掘机链轨、链条及支重轮、托链轮、引导轮、驱动齿、履带板螺栓、链销、链通、斗轴、斗轴套、千秋架、弹簧座等系列产品。
The FEM for the assembly parts of piston, gudgeon pin and small-end of connecting rod is constructed to investigate a diesel engine piston with an oscillating-oil-cooling channel.
针对某增压柴油机振荡冷却油腔活塞的非对称结构，建立全活塞活塞销连杆小头的有限元模型；提出了振荡冷却油腔的第三类热边界条件的数学描述并进行了验证；
The utility model relates to a novel crosshead connecting structure which is composed of a cylinder rod, a spherical washer, a crosshead, a cross pin and a connecting rod;
一种新十字头连接结构，由活塞杆、球面垫圈、十字头、十字头销和连杆组成。
The four-bar linkage included in the mechanical steering system of industrial vehicles is composed of the crank of steering gear, longitudinal connecting rod, the arm on kin pin and frame.
在轮式工业车辆的机械式转向操纵系统中，联系转向器与梯形机构的纵拉杆机构，在构造上属于含有两个球铰和两个圆柱铰的RSSR机构。
The rod was a bamboo pole, the hook was converted from a paper pin, the string was cotton sewing thread, the float pulled from a broom, and tooth-paste casing boiled and shaped into a plummet.
竹竿就是鱼杆，大头针就是鱼钩，缝纫机线就是钓鱼线，芒草扫帚抽一根出来切出一截就是鱼漂，而牙膏壳就烧制成铅锤。
The rod was a bamboo pole, the hook was converted from a paper pin, the string was cotton sewing thread, the float pulled from a broom, and tooth-paste casing boiled and shaped into a plummet.
竹竿就是鱼杆，大头针就是鱼钩，缝纫机线就是钓鱼线，芒草扫帚抽一根出来切出一截就是鱼漂，而牙膏壳就烧制成铅锤。
应用推荐