A fuzzy PID control system is proposed.
提出一种模糊pid控制系统。
Fuzzy PID control system is the combination of fuzzy theory and PID controllers.
模糊pid控制系统就是模糊理论与传统的PID控制器的结合。
Adopt PID control system, temperature control precision higher and more to save energy.
采用PID自动控制系统，温控精度更高更节能省电。
Complete differential PID was mostly adopted in researching of the robust PID control system.
然而在鲁棒pid控制系统的研究中，它们几乎都是采用完全微分pid。
The two-degree-of-freedom PID control system with variable structure has been introduced in this paper.
阐述了系统结构可变的二自由度通用控制系统；
The traditional PID control system applies the temperature control system of lumber drying process now.
木材干燥工艺温度控制系统目前多采用传统的PID控制方法。
This paper discusses the application of linear quadratic optimal control theory in network PID control system.
讨论了线性二次型最优控制理论在神经网络PID控制系统中的应用。
A sliding mode synchronization controller of the reticle stage was added to the conventional PID control system.
在常规pid控制系统基础上增加了掩模台精动滑模同步控制器。
In this paper, the optimal PID control system for aero-engine was designed using LQR (Linear-Quadratic Regulator) approach.
本文采用基于LQR的PID控制算法，设计某型号涡扇发动机控制系统。
A numerical PID control system which USES 8098 single chip microcomputer as its main controller is introduced in this paper.
本文介绍一种以8098单片机为主控制器的数字PID控制系统。
Results show that this method is feasible and control parameter in this system surpassed the conventional PID control system.
实验结果表明，在本系统中，模糊控制方法很好地实现了控制目的，控制品质明显好于常规pid控制方法。
Rotation speed control of marine diesel engine generator is built by the combination of neural network and PID control system.
结合神经网络与PID控制，形成船舶柴油发电机转速神经网络控制系统；
The fuzzy self-tunning PID control system consists of two parts which are parameter adjustable PID system and fuzzy control system.
PID参数模糊自整定系统主要由参数可调整PID控制器和模糊控制器两部分组成。
After using the fuzzy-PID control system, the stability of the refined coal quality is guaranteed and the recovery ratio is increased.
选用基于模糊理论的PID控制系统后，有力地保证了精煤质量的稳定和回收率的提高。
Combined on the characteristics of fuzzy and PID control, it adopts a fuzzy-PID control system to control the temperature of anneal stove.
本文结合模糊控制与PID控制的优点，采用模糊pid控制器控制退火炉的温度。
The design principle and realization method of the digital PID control system are discussed according to the characteristic of DC brushless motor.
根据无刷直流电动机的特性，讨论了数字pid控制系统的设计原理和实现方法。
The experiment results show that the fuzzy PID control system designed in this paper has better control performance than conventional PID control system.
实验结果表明，本文所设计的模糊pid控制系统比常规pid控制系统具有更优良的控制品质。
The High-Temperature Multiphase-flow Wind Tunnel is a big inertia and strong coupling system, and conventional PID control system is unable to satisfy it.
高温多相流风洞是一个大惯性、强耦合的系统，常规PID控制难以满足要求。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY-PID 控制系统，对陶瓷工业窑炉的温度进行控制。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY -PID控制系统，对陶瓷工业窑炉的温度进行控制。
The test showed that the fuzzy-PID control system has higher synchronization accuracy and anti-interference ability compared to the classical PID controller system.
仿真结果表明采用模糊pid的同步控制系统的同步精度和抗干扰能力与传统PID控制系统相比，有了进一步的提高。
The kinematics modeling and parameters adapt fuzzy-PID control system design of the video regulator manipulator on the terminal of the arm is the focus of this text.
本文的主要工作是机械臂终端多自由度视频头调节机械手的运动学建模及其参数自适应模糊PID控制系统的设计。
The simulation results show that the superheated steam temperature control system using this algorithm has better performances than that of fuzzy PID control system.
仿真结果表明，利用该算法设计的汽温控制系统比应用模糊pid控制设计的汽温控制系统具有更加优良的性能。
With the same structure of the PID control system and the state variable feedback system, a new solution to tuning PID control parameters by pole placement is presented.
利用所提出的PID控制系统与状态反馈控制系统具有相同结构的特点，提出了利用状态反馈极点配置方法来整定PID参数的思路。
The simulation results show that the control sy stem which uses the robust PID controllers has better robust performance than th at of the conventional PID control system.
仿真结果表明，用本文方法设计的过热汽温控制系统比常规的PID控制具有较好的鲁棒性能。
The computer simulation technology, which applied to optimize control of PID control system, is a good example that control system was reformed with information technology.
把计算机数字仿真技术运用于生产过程的PID控制系统中，实现对控制系统的最优化控制，是信息技术应用于控制系统的一个范例。
The conventional PID control system was not very suit for this type of system, because the conventional PID control can't accomplish online auto-tuning PID parameter adjust.
常规的PID控制对于这样的系统的控制效果不是很理想。 这是因为常规PID不能根据现场的情况进行在线自我调节参数。
The computer simulation results indicate that the fuzzy PID control system is more robust than the comparable linear PID control system in control of the tissue temperature.
计算机仿真结果表明模糊控制系统在组织温度控制中比对应的线性PID控制系统鲁棒。
The computer simulation results indicate that the fuzzy PID control system is more robust than the comparable linear PID control system in control of the tissue temperature.
计算机仿真结果表明模糊控制系统在组织温度控制中比对应的线性PID控制系统鲁棒。
应用推荐