The fuzzy-PID control arithmetic based on adaptive parameter is proposed by the characteristics of fuzzy system and PID system.
针对模糊系统和PID系统的特点，提出了模糊pid参数自调整的控制算法。
In order to realize synchronous control, distributed motor synchronous control system based on PLC and frequency conversion and PID control arithmetic are adopted.
本文提出了基于PLC和变频调试技术的集散式同步控制方案和采用PID控制算法实现多电机的同步控制。
This paper introduces a hydraulic synchronous system, which USES a new-type digital valve as synchronous controller and makes use of a fuzzy-PID control arithmetic.
介绍了一种以新型数字同步阀为同步控制元件，运用模糊pid算法进行控制的液压同步系统。
According to the requirement of temperature control, the fuzzy-PID control arithmetic has been put forward and applied to the temperature control system of casting roller.
根据温度控制需求，提出了模糊pid控制算法，并将其应用到流涎辊温度控制系统中。
The simulation results showed that control effect of the controller was better than that of the conventional PID control arithmetic and the PID control arithmetic of fuzzy self adaptation.
仿真结果表明该控制器的控制效果优于传统的PID控制算法和模糊自适应PID控制算法。
This temperature control system used improved PID control arithmetic in software, fully considered measure of anti-jamming in hardware, the chart circuit and software flow chart are offered.
该温度控制系统。软件上采用了改进的增量型PID控制算法，硬件上充分考虑了抗干扰措施，并给出了硬件结构图与软件流程。
It importantly analysis the digital PID Control Arithmetic in NABCO MG-800 Govemor. The set rule of three parameter is gived. The value of parameter will make what affection to engine revolution.
着重分析了MG-800电子调速器系统中的数字PID控制算法，详细给出算法中三个参数的设置规则和参考设定值，同时分析了不同的参数值对于主机转速的影响。
Finally, as to the control arithmetic, PID and fuzzy control are colligated to improve the control precision and speed, which is helpful for solving the similar problems.
最后，控制算法方面运用了基本PID控制与模糊控制相结合的控制算法，达到了较高的控制精度和速度，而且对于类似问题的解决具有借鉴意义。
In the path tracking module, adopt the beforehand aiming arithmetic based on PID controller, including the speed control and turning control.
在路径跟踪模块中，采用了基于PID控制器的预瞄控制算法，包括速度控制和转向控制。
The arithmetic of PID control based on neural network can obtain small speed overshoot and strong anti-interference feature.
在抗干扰特性方面，基于神经网络的PID控制算法有较小的波动，而且调节时间较短；
In the fifth chapter, the YNST control software and positional PID arithmetic are introduced.
第五间中对YNST控制软件和位置控制算法进行详细介绍。
The conclusion shows that the digital PID arithmetic is flexible in control, high in precision and easy in high integration compared with analog arithmetic.
结论表明数字PID算法和模拟算法相比，具有控制灵活、精度高、易于高度集成化等优点。
In the motion of semiconducting equipment, better digital PID control parameters can improve stability and reliability of equipment. Using separate integral arithmetic can get optimal PID control.
在半导体设备运动过程中，有效的调节数字PID控制参数可以提高设备运动的稳定性和可靠性，利用积分分离的算法来实现具有最佳组合的PID控制。
The driving model of the Electrical Vehicle is to separately control wheels by fuzzy PID controlling arithmetic. This arithmetic makes slip-rate of every wheel reaching the best rate.
对所建立的简化电动汽车驱动模型，采用模糊PID控制算法对左右两侧驱动轮单独控制，应用此算法可使各车轮的滑转率控制在最佳滑转率附近。
PID arithmetic by which the loading process of displacement system is controlled is successfully adopted in two control systems.
研究积分分离PID控制算法，用来控制根据位移加载的试验过程；
Finally, we present a new control scheme of air pressure and flow and build PID decoupling control arithmetic based DRNN of air control system.
最后，提出了新的气源压力、流量系统控制方案，建立了对气源压缩空气压力、流量系统的基于神经网络整定的PID解耦控制算法。
The system is made up of semiconductor cooler (TEC, thermal electrical cooler) which is controlled by a PC with PID arithmetic. And use the duty ratio of PWM to control the output power of TEC.
该系统使用PC机作为控制平台，采用自整定PID算法，调节输出pwm波的占空比来控制半导体制冷器的输出功率。
We adopt traditional PID arithmetic to control current loop, and we adopt fuzzy control arithmetic to control rev loop, for rev loop is affected by many kinds of linear factors.
而对其中的电流环采用传统的PID算法控制，对于转速环，由于转速受多种非线性因素的影响，因而采用模糊控制算法。
In addition, system adopt high track precision, strong anti-jamming rectangular center arithmetic and adopt simple arithmetic, high reliability PID track control arithmetic.
另外，系统采用了跟踪精度高，抗干扰能力强的矩心算法和算法简单、鲁棒性好、可靠性高的PID跟踪控制算法。
Then the paper discusses method of robot's kinematics and inverse kinematics and robot's control arithmetic mostly about PID control.
然后，本文探讨了机器人运动学正逆解求解方法和伺服电机控制算法，详细地讨论了其中的PID算法。
Aimed at the characteristics of coal bed methane, an air-fuel ratio control method which is based on CMAC neural network and PID is adopted and its arithmetic is elaborated in this article.
针对煤层气的特性，本文提出了一种基于CMAC神经网络和PID复合控制的空燃比控制方法，并对其算法进行了详细的阐述。
This scheme overcomes the shortcomings of pure PID control and the pure DMC arithmetic whose single structure causes poor inner anti-jamming ability.
它既克服了单纯PID鲁棒性差的缺点，又克服了单纯DMC由于单层结构而带来的抗内扰能力弱的问题。
This paper discusses the function of control static output in the PID arithmetic expression and gives, out several methods of PID arithmetic expression.
讨论了PID算式中稳态控制输出在算式中的作用，同时讨论并给出了提高PID算式控制效果的几种措施。
Base on the detailed analysis to response state of PID control, the technology of fuzzy control and table the arithmetic of fuzzy-PID control was applied, which preferably satisfied control request.
在对PID控制的响应特性进行详细分析的基础上，应用模糊控制技术，提出并设计了模糊-PID控制器，较好的满足了控制要求。
Base on the detailed analysis to response state of PID control, the technology of fuzzy control and table the arithmetic of fuzzy-PID control was applied, which preferably satisfied control request.
在对PID控制的响应特性进行详细分析的基础上，应用模糊控制技术，提出并设计了模糊-PID控制器，较好的满足了控制要求。
应用推荐