And evaluate the performance of PID controller by the step response of the system.
并通过系统响应曲线图对设计的PID控制器的性能进行评估。
PID parameter tuning and optimizing is an important issue in the field of automatic control.
PID参数整定与优化一直是自动控制领域研究的重要问题。
The system can use computer technology to implement PID control with good applicability and flexibility, which can adjust PID parameters according to the system performance command.
系统采用计算机技术实现PID控制，可以根据系统性能指标调整PID参数，具有良好的适用性和灵活性。
After that, introducing weight gene, syncretized PID and fuzzy control's outputs by adding weight. At last, the result of fusion was output to object controlled.
之后引入加权因子，采用加权的方法将PID和模糊控制各自的输出进行融合，将融合的结果最后输出到被控对象上。
The results of simulation show the new type of PID controller is better than the conventional type and it can be used on other no-linear complex mechanical systems.
仿真结果表明：该新型控制器控制效果比传统PID控制器好，在其他非线性复杂机械系统控制上也有一定的应用价值。
The controller achieves the adaptation of normal PID controller parameters on line by fuzzy inferences.
该控制器通过模糊推理实现PID控制器参数的在线调整。
The control system model consists of control strategy, sensors and actuators sub models. The control strategy is a PID controller.
控制系统模型包括控制策略、传感器和执行器模型，本文选用的控制策略为PID调节器。
The design methods and further improvement of optimal PID controller for these plants are investigated respectively and a lot of simulation experiments are performed.
针对各类对象，分别讨论了基于稳定域最优PID控制器的设计及进一步改进，并进行了大量仿真实验。
Temperature control system based on no touch switch has realized PID control.
温度控制采用无触点的开关控制，并实现了PID调节。
Combine blur control with general PID control, on line self-adjusting PID parameters according to different error and error variety-rate, which is called PID parameters self-tuning blur controller.
将模糊控制与常规pid控制相结合，根据不同的误差、误差变化率对PID的参数进行在线自动调整，这就是PID参数自整定模糊控制器。
Since the temperature system of humidifier is a large time-delay nonlinear system, the normal PID control can not achieve the desired performance.
然而加湿器的温度系统是一个大时滞非线性系统，采用常规的PID控制无法实现有效的控制。
Simulation results show that the controller is better in comparison with traditional PID controller, and it has stronger robustness for the change of system parameters.
仿真结果表明，滑模变结构控制的性能优于常规的PID控制，在系统参数变化时表现出更强的鲁棒性。
This paper designed a kind of PID parameters self-tuning controller based upon blur control.
本论文设计了一种基于模糊控制的PID参数自整定控制器。
PID regulation in instrumentation circuit is realized by using program logic controller.
利用可编程序控制器实现仪表回路的PID调节控制。
Compared to the normal PID controller or the fuzzy controller, the finer control result was attained.
比常规的PID控制器或模糊控制器，可以达到更好的控制效果。
It is better for the control effect of the boiler with severe lag characters that the burning system of the boiler is under the fuzzy PID control.
采用模糊pid控制方法对锅炉燃烧系统进行控制，对具有大滞后特性的锅炉更具有显著控制效果。
Directly from the PLC PID operation to the temperature controller, DT3, as the temperature control core, reduce the PLC computation and improve the control effect of heating key process.
从PLC直接作PID运算提升到温度专用控制器，DT3为温度控制核心，减轻PLC计算量，提高了加热关键工序的控制效果。
Fuzzy control technology was applied to design a two-input and three-output self - (adapting) fuzzy PID controller to control the water level of boilers.
文章应用模糊控制技术，设计一种二输入三输出自适应模糊pid控制器，对锅炉水位进行控制。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
For the voltage controlled system model, pole point method is taken to design the PID controller, and good result is achieved.
对于电压控制对象模型，采用极点配置的方法设计PID控制器，均取得了较为满意的控制效果。
PID controller is widely used in the industry control process, but the parameters tuning is still a problem that people concerned.
PID控制器在当前的工业过程控制中仍有着广泛的应用，但其控制参数整定一直是难点问题之一。
This algorithm is with wider application range compared with the other self-tuning PID control algorithms.
该算法与其它自校正PID控制算法相比，具有适用范围更广的特点。
PID is one of the most common methods in Tank Artillery Stabilizer location service controlling system, in which the overshoot often conflicts with short settling time.
在坦克火炮稳定器的位置伺服控制系统中，PID是最常用的控制方法之一，在位置伺服控制系统中超调量与调节时间通常是矛盾的。
A normal PID controller is used in industry, due to its simple structure and being realized easily.
常规的PID控制器由于结构简单、实现容易，在工业控制中被广泛应用。
This paper introduces the traditional control method of Gyro temperature control system, and gives the digital PID control method of the gyro temperature control based on PC/104.
介绍了陀螺温控系统的传统控制方法，并在此基础上提出了基于PC/104的数字PID控制的陀螺温度控制方法。
This paper introduces the traditional control method of Gyro temperature control system, and gives the digital PID control method of the gyro temperature control based on PC/104.
介绍了陀螺温控系统的传统控制方法，并在此基础上提出了基于PC/104的数字PID控制的陀螺温度控制方法。
应用推荐