The phase transformation behavior is discussed.
同时，对相变行为进行了讨论。
The phase transformation of synthesized plate of melt was studied.
对合金熔体的合成片相变进行了研究。
The width and depth of the phase transformation hardened zone were measured.
通过灰铸铁激光相变硬化实验，实测了硬化层深度和宽度。
Metal film plays an important role in phase transformation of synthetic diamond.
人工合成金刚石的相变过程中，金属包膜的作用是很重要的。
The phase transformation temperature was very important to titanium and its alloys.
相变温度对钛及钛合金加工和热处理来说具有重要意义。
The distribution of carbon atoms and the type of phase transformation are discussed.
同时也对样品中碳的分布和相变的类型进行了探讨。
This equation reflects the special character of martensite phase transformation well.
该方程能较好地反映马氏体相变特征。
Pursuing the four-phase transformation process we have described delivers value through.
依照刚才叙述的四阶段转化进程，通过以下内容实现。
The microstructure after phase transformation consists of ferrite mainly and some pearlites.
相变后的最终组织为大量铁素体加部分珠光体。
XRD investigation shows that martensitic phase transformation takes place in the white layers.
射线衍射表明白层内发生了马氏体相变。
Both phase transformation toughening and whisker reinforcing are existed in the composite system.
复合材料中存在着晶须补强和相变增韧等双重强韧化机制。
Furthermore we discussed the problem of phase transformation for Schrdinger equation and Klein-Gordon equation.
另外，讨论了薛定谔方程、克莱因·戈尔登方程的相位坐标变换问题。
The breaks in heating and pre-sintering repeatedly at low temperature are unfavourable to phase transformation.
预烧过程中升温中断或在较低温度下反复预烧不利于正常相变；
Phase transformation behavior obtained from CCT curves provides useful instructions for the heat treatment process.
从连续冷却转变图获得的相转变行为对热处理过程提供了有用的指导。
The vibration of rotor system was controlled by the phase transformation of SMA with the method of electric heating.
采用电流加热控制记忆合金元件的相变，进而控制转子的振动。
Desolation transformation is an important solid phase transformation of metals, and is the theoretical basis of aging treatment.
脱溶转变是金属材料的一种重要固态转变，是时效处理的理论基础。
The phase transformation and reaction mechanism in the process of roasting for arsenic removal was also discussed by means of XRD.
同时，通过XRD分析，对焙烧脱砷过程中的物相变化及反应机理进行了探讨。
If done on a large scale, this is a form of two-phase transformation without having separate processor runs for phase 1 and phase 2.
如果很大，这是一种两阶段转换的形式，但是不需要将处理程序的运行划分成阶段1和阶段2。
The characteristics of phase transformation and microstructure of nano titanium oxide powders during plasma spraying were discussed.
作为对比，同时进行了氧化钛纳米粉体在烧结过程中相变及微结构变化的研究。
Shock-wave instrumentation provides an approach for the study of phase transformation during shock compression of the Jilin meteorite.
应用冲击波试验技术研究吉林陨石在冲击压缩期间所出现的相转变。
Phase transformation sequence in diffusion layer and the existence of residual austenite have great effect on the distribution of residual stress.
渗层中的相变次序和残余奥氏体的存在对残余应力分布影响较大。
The first order phase transformation in the samples made of commercial Gd was destroyed by impurities, and no giant magnetocaloric effect was found.
发现采用商业级钆配制合金时，由于杂质抑制了材料的一级相变，未发现巨磁热效应。
The phase transformation hardening and fast melting-solidification by controlling power intensity and shocking-time of laser pulse have been analysed.
分析和实验得出，通过控制入射激光功率密度和作用时间可以实现相变硬化及快速熔化——凝固处理。
To quench 20 steel in critical zone under different intensity alternation magnetic field and to observe the microstructure after phase transformation.
对20钢进行不同强度交流磁场下的临界区淬火处理，观察相变后的组织。
The influence of the rate of heating at phase transformation region, temperature of austenitizing and holding time on the austenite grains are studied.
讨论了在相变区的加热速度、奥氏体化温度及保温时间对奥氏体晶粒的影响。
The morphology of laser cladding layer was observed by SEM, composition analysis was applied by EDS, and the phase transformation was characterized by XRD.
对激光熔覆层用扫描电境（SEM）进行形貌观察，并进行能谱成分分析，用XRD进行合金物相的表征。
Blend films of water-insoluble silk fibroin(SF) powder and medical polyurethane were produced by the method of immersion-precipitation phase transformation.
采用浸没沉淀相转化法制备非水溶性丝素粉体与医用聚氨酯共混膜。
The solid/liquid phase transformation of ZL201 aluminium alloy in near liquidus semi-continuous casting was simulated using multiscale simulation technique.
用多尺度模拟方法研究了近液相线半连续铸造中的ZL201合金的液/固相变。
For quenching processes are typical temperature - phase transformation - stress coupled processes, it is quite difficult to precisely predict the processes.
淬火过程是典型的温度-组织转变-应力耦合的过程，准确模拟淬火过程十分困难。
For quenching processes are typical temperature - phase transformation - stress coupled processes, it is quite difficult to precisely predict the processes.
淬火过程是典型的温度-组织转变-应力耦合的过程，准确模拟淬火过程十分困难。
应用推荐