The combination Power of phase surface between NR and HDPE in blends can be enhanced by dynamic Vulcanization.
动态硫化增加了共混物中NR与HDPE相界面间的结合力。
In the reversed-phase system, the influence of residual silanol groups of C18 bonded phase surface on the retention behaviors of heteropoly acid (HPA) anion is studied.
在反相体系中，研究了十八烷基键合相表面残留硅醇基对杂多酸阴离子保留行为的影响。
Swallowable Perfume, currently in its development phase, is said to work with the natural processes of metabolism, releasing fragrant molecules through the skin's surface during perspiration.
香水胶囊目前还处在研发阶段。据说，这种胶囊是利用了人体的自然代谢过程，在排汗的同时，通过皮肤表面来释放芳香分子。
Unlike an ocean wave, a wavefront or surface of constant phase is unobservable and undetectable.
和海浪不同，波阵面或固定相平面是不能观测和不能发现的。
In the optimization phase, we develop a predictive model for the system to find useful operating conditions through response surface contour plots and perhaps mathematical optimization.
在优化阶段，我们开发了一个系统的预测模型，通过响应面的等高线图或者数学优化，去寻找合适的操作条件。
The phase change thermography technique is a wind tunnel test technique to spray some phase change paint on the aircraft surface for measuring heat distribution in a large area.
相变热图试验技术是通过在飞行器表面喷涂具有一定相变温度的相变涂料来进行大面积热测绘的一项风洞试验技术。
In this paper, optimization of phase change parameter and hardening parameter of closed hierarchical single surface model is studied.
对封闭型分级单屈服面模型参数中的阶段改变参数和硬化参数的优化进行了研究。
Bubbles of gas rise through the dense phase, erupt at the surface.
从密相升起的气泡，在表面上爆裂。
The heat flux generated in grinding is utilized to induce martensitic phase transformation in the surface layers of components, such as that achieved by other surface strengthening processes.
磨削淬火技术是利用磨削热对工件表面进行热处理，使工件表层发生马氏体相变，达到与表面强化处理一样的性能。
The reflection phase property and surface wave dispersion are analyzed using finite element method.
用有限元方法分析了其反射相位特性及表面波传输特性。
Using vacuum gas phase deposition, diamond surface is coated with strong carbide metal or alloy membrane.
采用真空气相沉积法在金刚石表面镀覆强碳化物金属或合金薄膜。
Surface properties such as profile and crystal phase of bent silicon samples by long laser pulses were analyzed.
对长脉宽脉冲激光弯曲后的硅片试件进行了表面形貌以及晶相等特性分析。
UV Raman spectroscopy has been employed to investigate the surface phase transformation of zirconia calcined at different temperatures in different atmospheres.
以紫外拉曼光谱技术研究了在不同焙烧气氛中氧化锆样品的表面晶相结构及其转变过程。
A phase interference method, for measurement of the relative change of surface acoustic wave velocities, is presented.
本文提出了一种相位干涉法。用来测量表面声波速度的相对变化。
The optimal catalytic performance could be obtained by adjusting the surface concentration of active phase within a proper range.
只有当催化剂表面的活性相浓度控制在适当的范围，催化剂才表现出最佳的催化行为。
The local behavior of the surface oil flow patterns is analyzed with phase plane theory of ordinary differential equations. Also the surface oil flow patterns are locally classified.
在此基础上利用微分方程相平面理论分析表面油流谱的局部特性和对流谱局部地进行分类。
Scaning electronics microscopy (SEM) was applied hereby to surface phase and elements analysis of the powder by precursor method and grain sample by microwave method.
用扫描电子显微镜(SEM)对粉料及微波合成的块体样品表面进行物相分析和元素的半定量分析。
One of main reason induced a piece - wise function and the break point is the loss of radiant energy before the radiant energy reaches the surface of condensed phase.
导致两段函数和折点形成的主要原因是在辐射能到达凝聚相表面之前部分辐射能已经发生了损失。
The well-known phase speed formulas of surface inertial gravity wave and internal shear inertial gravity wave are the special cases of this frequency equation.
表面惯性重力波和惯性重力内波的相速公式都是这个更普遍的频率方程的特殊情况。
XRD and SEM were employed to characterize the phase component and surface morphology of the films.
利用XRD和SEM分别对氧化膜的相组成和表面形貌进行了分析。
The macrostructure, the composition of the crystal phase, the surface ion valency and concentration of the catalysts were investigated by BET, XRD and XPS techniques.
采用比表面、孔结构、XRD和XPS等测试技术研究了催化剂的宏观结构、晶相组成、表面铁、钼离子价态和浓度。
In this paper, the measurement method of high frequency brightness modulation laser phase for mechanic surface microcosmic appearance is given out.
提出了用高频光强调制、同源频率合成、软件鉴相的激光相位微距测量方法测量表面微观轮廓高度。
The plane defects of metals and alloys include grain boundary, sub-grain boundary, twins grain boundary, phase boundary, stacking fault, outward surface, etc.
金属和合金中的面缺陷包括晶界、亚晶界、孪晶界、相界、堆垛层错、外表面等。
Computer simulation and experimental results make it clear that this method can effectively remove noise in phase map, unwrap the wrapped phase, and reconstruct the surface of the detected object.
计算机模拟和实验结果均证明，此方法能有效地去除相位图中的噪声，实现带噪声的主值相位图的相位展开，可靠地重建被测物体的表面形貌。
Oxygen storage materials which have high surface areas and super oxygen storage property were precipitated by ammonium carbonate, and its' phase, oxygen storage capacity, surface area et al.
以碳酸铵为沉淀剂制备一系列高比表面积、高储氧性能的储氧材料，表征了其物相组成，同时对其储氧性能和比表面积进行了测定。
X-ray diffraction (XRD) and scanning electronic microscope (SEM) have been used to characterize the phase, orientation and surface morphology.
射线衍射和扫描电镜分别用于表征膜的物相、取向和表面形貌。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面，成功获得覆层材料。
The paper discusses the problem concerning light reflecting and refracting polarization and phase on the surface of the transparent medium by using the Fresnel formula.
本文利用菲涅耳公式讨论了光在透明介质界面反射、折射的偏振和相位。
The paper discusses the problem concerning light reflecting and refracting polarization and phase on the surface of the transparent medium by using the Fresnel formula.
本文利用菲涅耳公式讨论了光在透明介质界面反射、折射的偏振和相位。
应用推荐