A dual-phase microstructure containing free ferrite has a lower value of adhesive force.
铁素体双相组织能降低粘附力值。
The effects of different oxidation voltage and pulsed frequency on microstructure, thickness and phase constitute of the coatings have been investigated.
试验研究了不同微弧氧化电压和脉冲频率对涂层微观形貌，涂层厚度及相组成的影响。
Microstructure analysis results showed that, in the condition of rapid solidification, the second phase morphology of monotectic alloys transited from rods into particles.
对合金的显微结构分析结果表明，在快速凝固条件下，偏晶合金中的第二相形态从带条状转变为颗粒状。
The microstructure and mechanical properties of a new type wear-resistant white cast iron with the boride as wear-resistant phase were investigated.
研究以硼化物为耐磨相的新型耐磨白口铸铁的组织特点与力学性能。
The formation of roll-casting microstructure is mainly attributed to the deformation of un-solidified liquid phase, the varied distribution of mass and heat.
铸轧组织的形成主要是变形作用于未凝固的液相，引起质量和热量的分布状态发生改变所致。
The microstructure of the intergranular amorphous phase is different with that of the complete amorphous.
晶间非晶相的微结构不同于完全非晶，并随淬速的变化而改变。
Properties of nitrided parts have close relation to phase composition of their compound layer and microstructure of their diffusion layer.
渗氮件的性能与渗氮层的化合物相组成和扩散层的微观结构密切相关。
The mainly characteristic of it is the high efficiency intermingles and homogeneous. Not only the microstructure but also the second phase is uniform.
其主要特征是均匀性掺杂，不仅反映在纳米电子发射材料的微观结构方面，而且表现在第二相的更加均匀分布方面。
The phase contents, microstructure of the samples, and their relationship with mechanical properties were investigated by X ray diffraction, SEM, and EDS.
并采用x射线衍射分析、扫描电镜及能谱分析研究了该样品的机械性能与相组成和微观结构的关系。
The microstructure after phase transformation consists of ferrite mainly and some pearlites.
相变后的最终组织为大量铁素体加部分珠光体。
Polymeric materials, with their various hierarchies of microstructure, may have metastable states present due to small phase size, composition, external fields and other causes.
具有多重微结构层次的聚合物体系可因小的相尺寸、组成、外场或其它因素而呈现亚稳态。
Phase and microstructure changes of silica ultrafine particles in sintering were studied with FT-IR, XRD, DTA/TG and TEM et al.
并用FT-IR、XRD、DTA/TG和TEM等手段研究了二氧化硅超微细粉在煅烧过程中的物相和显微结构的变化。
The powder grown behavior and phase transformation were studied by XRD microstructure data and the phase transformation theory.
利用XRD微结构数据对粉晶长大行为及其相转位进行了分析研究。
The effect of temperature schedule on crystalline phase and microstructure and the effect of phase and microstructure on properties were analyzed in this this.
本论文还分析了温度制度对相组成和显微结构的影响，以及相组成和显微结构对性能的影响。
In this paper, the effect of sintering temperature on densification, phase compositions and microstructure was mainly studied.
本文作者主要研究了不同烧成温度对复合材料致密化、物相组成和显微结构的影响。
The phase structure and microstructure of as-cast and quenched alloys were analyzed and observed by XRD and SEM.
用XRD和SEM分析了铸态及快淬态合金的相结构，并观察了合金的微观组织形貌。
The Ni based alloy powder surfacing layer was obtained by light beam surfacing on the 45 steel and the microstructure of heat affected zone(HAZ) and the phase of the surfacing layer were studied.
采用聚焦光束热源在45钢母材上获得了镍基合金粉末堆焊层，研究了堆焊层的物相组成及母材热影响区的微观组织特征。
Two principles of the phase field method are introduced, and the application of the phase field method for numerical simulation of solidification microstructure is expatiated.
介绍了相场方法的两种基本原理，阐述了相场方法在金属凝固过程微观组织形成模拟中的应用情况。
The phase structure and microstructure of samples under different heating rates were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM) etc.
用X射线衍射仪（XRD）以及扫描电镜（SEM）等研究了试样在不同预设升温速度下的相结构和显微组织。
The microstructure and the phase composition of the alloy were analyzed through optical microscopy, SEM, EDAX and XRD techniques.
通过光学显微术、SEM、EDAX、XRD技术分析了热等静压对材料的显微组织和相成分的影响。
The distributions of composition, phase-and microstructure were examined respectively by using electron probe microanalysis (EPMA), X-ray Diffraction (XRD) and scanning electron microscopy (SEM).
分别用电子探针（EPMA）、X衍射（XRD）和扫描电镜（SEM）查证了其组分、相结构和显微结构的梯度分布。
X-ray diffraction analysis: analyzing the microstructure of materials, such as phase qualitative, quantitative analysis, stress testing and structural analysis.
射线衍射分析：材料结构的微观分析，如物相定性、定量分析，应力测试，织构分析等。
The fabricating process of metallic ceramic coatings by thermochemical reaction method was studied. The phase structure and microstructure of the coatings were also investigated in this paper.
研究用热化学反应法在金属表面制备陶瓷涂层的工艺，并对涂层的相结构及显微组织进行分析。
It is discovered that the amended phase and microstructure map shows good accordance with the experimental results.
与实验中获得的组织选择图对比，发现修正后的组织及相选择图与实验吻合良好。
The results show that withstand voltage characteristics of the ceramics is not only correlated with both effects of PTC, voltage-dependent resistivity, but also with glass phase in microstructure.
结果表明，该陶瓷耐压性能不仅与PTC效应，压阻效应有关，还与显微组织结构中存在的玻璃相有关。
Results showed that heat treatment temperatures affected the properties, phase evolution and microstructure of the specimens remarkably.
结果表明：热处理温度对有机硅树脂结合不烧铝碳滑板的性能、物相变化和显微结构影响显著。
The microstructure evolution and partially remelting processing of two-phase-region casting AZ91D magnesium alloy ingots were investigated.
对在两相区铸造进行半固态制浆所得az91 D镁合金坯料的部分重熔工艺条件及组织演变进行了研究。
The phase structure and microstructure morphologies of the as-cast and quenched alloys were analysed and observed by XRD and SEM.
用XRD和SEM分析了铸态及快淬态合金的相结构及微观组织形貌。
The effects of NiW contents on the crystallographic phase, microstructure, electromechanical properties and temperature stability of PMS-PNW-PZT materials were studied.
PZT体系的相组成、微观结构、机电性能、温度稳定性的影响。
The effects of NiW contents on the crystallographic phase, microstructure, electromechanical properties and temperature stability of PMS-PNW-PZT materials were studied.
PZT体系的相组成、微观结构、机电性能、温度稳定性的影响。
应用推荐